[PATCH v10 1/3] drm: Add writeback connector type

From: Liviu Dudau
Date: Tue Jun 12 2018 - 09:53:14 EST


From: Brian Starkey <brian.starkey@xxxxxxx>

Writeback connectors represent writeback engines which can write the
CRTC output to a memory framebuffer. Add a writeback connector type and
related support functions.

Drivers should initialize a writeback connector with
drm_writeback_connector_init() which takes care of setting up all the
writeback-specific details on top of the normal functionality of
drm_connector_init().

Writeback connectors have a WRITEBACK_FB_ID property, used to set the
output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the
supported writeback formats to userspace.

When a framebuffer is attached to a writeback connector with the
WRITEBACK_FB_ID property, it is used only once (for the commit in which
it was included), and userspace can never read back the value of
WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is
attached to a CRTC.

Changes since v1:
- Added drm_writeback.c + documentation
- Added helper to initialize writeback connector in one go
- Added core checks
- Squashed into a single commit
- Dropped the client cap
- Writeback framebuffers are no longer persistent

Changes since v2:
Daniel Vetter:
- Subclass drm_connector to drm_writeback_connector
- Relax check to allow CRTC to be set without an FB
- Add some writeback_ prefixes
- Drop PIXEL_FORMATS_SIZE property, as it was unnecessary
Gustavo Padovan:
- Add drm_writeback_job to handle writeback signalling centrally

Changes since v3:
- Rebased
- Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS

Chances since v4:
- Embed a drm_encoder inside the drm_writeback_connector to
reduce the amount of boilerplate code required from the drivers
that are using it.

Changes since v5:
- Added Rob Clark's atomic_commit() vfunc to connector helper
funcs, so that writeback jobs are committed from atomic helpers
- Updated create_writeback_properties() signature to return an
error code rather than a boolean false for failure.
- Free writeback job with the connector state rather than when
doing the cleanup_work()

Changes since v7:
- fix extraneous use of out_fence that is only introduced in a
subsequent patch.

Changes since v8:
- whitespace changes pull from subsequent patch

Changes since v9:
- Revert the v6 changes that free the writeback job in the connector
state cleanup and return to doing it in the cleanup_work() function

Signed-off-by: Brian Starkey <brian.starkey@xxxxxxx>
[rebased and fixed conflicts]
Signed-off-by: Mihail Atanassov <mihail.atanassov@xxxxxxx>
[rebased and added atomic_commit() vfunc for writeback jobs]
Signed-off-by: Rob Clark <robdclark@xxxxxxxxx>
Signed-off-by: Liviu Dudau <liviu.dudau@xxxxxxx>
---
Documentation/gpu/drm-kms.rst | 9 +
drivers/gpu/drm/Makefile | 2 +-
drivers/gpu/drm/drm_atomic.c | 124 ++++++++++++
drivers/gpu/drm/drm_atomic_helper.c | 25 +++
drivers/gpu/drm/drm_connector.c | 4 +-
drivers/gpu/drm/drm_writeback.c | 245 +++++++++++++++++++++++
include/drm/drm_atomic.h | 3 +
include/drm/drm_connector.h | 13 ++
include/drm/drm_mode_config.h | 15 ++
include/drm/drm_modeset_helper_vtables.h | 11 +
include/drm/drm_writeback.h | 91 +++++++++
include/uapi/drm/drm_mode.h | 1 +
12 files changed, 541 insertions(+), 2 deletions(-)
create mode 100644 drivers/gpu/drm/drm_writeback.c
create mode 100644 include/drm/drm_writeback.h

diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index 1dffd1ac4cd44..809d403087f95 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -373,6 +373,15 @@ Connector Functions Reference
.. kernel-doc:: drivers/gpu/drm/drm_connector.c
:export:

+Writeback Connectors
+--------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_writeback.c
+ :doc: overview
+
+.. kernel-doc:: drivers/gpu/drm/drm_writeback.c
+ :export:
+
Encoder Abstraction
===================

diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index ef9f3dab287fd..69c13517ea3a6 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -18,7 +18,7 @@ drm-y := drm_auth.o drm_bufs.o drm_cache.o \
drm_encoder.o drm_mode_object.o drm_property.o \
drm_plane.o drm_color_mgmt.o drm_print.o \
drm_dumb_buffers.o drm_mode_config.o drm_vblank.o \
- drm_syncobj.o drm_lease.o
+ drm_syncobj.o drm_lease.o drm_writeback.o

drm-$(CONFIG_DRM_LIB_RANDOM) += lib/drm_random.o
drm-$(CONFIG_DRM_VM) += drm_vm.o
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 895741e9cd7db..f2400c77fe3f3 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -30,6 +30,7 @@
#include <drm/drm_atomic.h>
#include <drm/drm_mode.h>
#include <drm/drm_print.h>
+#include <drm/drm_writeback.h>
#include <linux/sync_file.h>

#include "drm_crtc_internal.h"
@@ -676,6 +677,45 @@ static void drm_atomic_crtc_print_state(struct drm_printer *p,
crtc->funcs->atomic_print_state(p, state);
}

+/**
+ * drm_atomic_connector_check - check connector state
+ * @connector: connector to check
+ * @state: connector state to check
+ *
+ * Provides core sanity checks for connector state.
+ *
+ * RETURNS:
+ * Zero on success, error code on failure
+ */
+static int drm_atomic_connector_check(struct drm_connector *connector,
+ struct drm_connector_state *state)
+{
+ struct drm_crtc_state *crtc_state;
+ struct drm_writeback_job *writeback_job = state->writeback_job;
+
+ if ((connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK) || !writeback_job)
+ return 0;
+
+ if (writeback_job->fb && !state->crtc) {
+ DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] framebuffer without CRTC\n",
+ connector->base.id, connector->name);
+ return -EINVAL;
+ }
+
+ if (state->crtc)
+ crtc_state = drm_atomic_get_existing_crtc_state(state->state,
+ state->crtc);
+
+ if (writeback_job->fb && !crtc_state->active) {
+ DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] has framebuffer, but [CRTC:%d] is off\n",
+ connector->base.id, connector->name,
+ state->crtc->base.id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
/**
* drm_atomic_get_plane_state - get plane state
* @state: global atomic state object
@@ -1286,6 +1326,12 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
return -EINVAL;
}
state->content_protection = val;
+ } else if (property == config->writeback_fb_id_property) {
+ struct drm_framebuffer *fb = drm_framebuffer_lookup(dev, NULL, val);
+ int ret = drm_atomic_set_writeback_fb_for_connector(state, fb);
+ if (fb)
+ drm_framebuffer_put(fb);
+ return ret;
} else if (connector->funcs->atomic_set_property) {
return connector->funcs->atomic_set_property(connector,
state, property, val);
@@ -1367,6 +1413,9 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
*val = state->scaling_mode;
} else if (property == connector->content_protection_property) {
*val = state->content_protection;
+ } else if (property == config->writeback_fb_id_property) {
+ /* Writeback framebuffer is one-shot, write and forget */
+ *val = 0;
} else if (connector->funcs->atomic_get_property) {
return connector->funcs->atomic_get_property(connector,
state, property, val);
@@ -1584,6 +1633,70 @@ drm_atomic_set_crtc_for_connector(struct drm_connector_state *conn_state,
}
EXPORT_SYMBOL(drm_atomic_set_crtc_for_connector);

+/*
+ * drm_atomic_get_writeback_job - return or allocate a writeback job
+ * @conn_state: Connector state to get the job for
+ *
+ * Writeback jobs have a different lifetime to the atomic state they are
+ * associated with. This convenience function takes care of allocating a job
+ * if there isn't yet one associated with the connector state, otherwise
+ * it just returns the existing job.
+ *
+ * Returns: The writeback job for the given connector state
+ */
+static struct drm_writeback_job *
+drm_atomic_get_writeback_job(struct drm_connector_state *conn_state)
+{
+ WARN_ON(conn_state->connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK);
+
+ if (!conn_state->writeback_job)
+ conn_state->writeback_job =
+ kzalloc(sizeof(*conn_state->writeback_job), GFP_KERNEL);
+
+ return conn_state->writeback_job;
+}
+
+/**
+ * drm_atomic_set_writeback_fb_for_connector - set writeback framebuffer
+ * @conn_state: atomic state object for the connector
+ * @fb: fb to use for the connector
+ *
+ * This is used to set the framebuffer for a writeback connector, which outputs
+ * to a buffer instead of an actual physical connector.
+ * Changing the assigned framebuffer requires us to grab a reference to the new
+ * fb and drop the reference to the old fb, if there is one. This function
+ * takes care of all these details besides updating the pointer in the
+ * state object itself.
+ *
+ * Note: The only way conn_state can already have an fb set is if the commit
+ * sets the property more than once.
+ *
+ * See also: drm_writeback_connector_init()
+ *
+ * Returns: 0 on success
+ */
+int drm_atomic_set_writeback_fb_for_connector(
+ struct drm_connector_state *conn_state,
+ struct drm_framebuffer *fb)
+{
+ struct drm_writeback_job *job =
+ drm_atomic_get_writeback_job(conn_state);
+ if (!job)
+ return -ENOMEM;
+
+ drm_framebuffer_assign(&job->fb, fb);
+
+ if (fb)
+ DRM_DEBUG_ATOMIC("Set [FB:%d] for connector state %p\n",
+ fb->base.id, conn_state);
+ else
+ DRM_DEBUG_ATOMIC("Set [NOFB] for connector state %p\n",
+ conn_state);
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_atomic_set_writeback_fb_for_connector);
+
/**
* drm_atomic_add_affected_connectors - add connectors for crtc
* @state: atomic state
@@ -1702,6 +1815,8 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
struct drm_plane_state *plane_state;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
+ struct drm_connector *conn;
+ struct drm_connector_state *conn_state;
int i, ret = 0;

DRM_DEBUG_ATOMIC("checking %p\n", state);
@@ -1724,6 +1839,15 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
}
}

+ for_each_new_connector_in_state(state, conn, conn_state, i) {
+ ret = drm_atomic_connector_check(conn, conn_state);
+ if (ret) {
+ DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] atomic core check failed\n",
+ conn->base.id, conn->name);
+ return ret;
+ }
+ }
+
if (config->funcs->atomic_check) {
ret = config->funcs->atomic_check(state->dev, state);

diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 130da5195f3b6..dfd9cc6a2a3f6 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -30,6 +30,7 @@
#include <drm/drm_plane_helper.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_atomic_helper.h>
+#include <drm/drm_writeback.h>
#include <linux/dma-fence.h>

#include "drm_crtc_helper_internal.h"
@@ -1172,6 +1173,25 @@ void drm_atomic_helper_commit_modeset_disables(struct drm_device *dev,
}
EXPORT_SYMBOL(drm_atomic_helper_commit_modeset_disables);

+static void drm_atomic_helper_commit_writebacks(struct drm_device *dev,
+ struct drm_atomic_state *old_state)
+{
+ struct drm_connector *connector;
+ struct drm_connector_state *new_conn_state;
+ int i;
+
+ for_each_new_connector_in_state(old_state, connector, new_conn_state, i) {
+ const struct drm_connector_helper_funcs *funcs;
+
+ funcs = connector->helper_private;
+
+ if (new_conn_state->writeback_job && new_conn_state->writeback_job->fb) {
+ WARN_ON(connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK);
+ funcs->atomic_commit(connector, new_conn_state->writeback_job);
+ }
+ }
+}
+
/**
* drm_atomic_helper_commit_modeset_enables - modeset commit to enable outputs
* @dev: DRM device
@@ -1251,6 +1271,8 @@ void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,

drm_bridge_enable(encoder->bridge);
}
+
+ drm_atomic_helper_commit_writebacks(dev, old_state);
}
EXPORT_SYMBOL(drm_atomic_helper_commit_modeset_enables);

@@ -3660,6 +3682,9 @@ __drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,
if (state->crtc)
drm_connector_get(connector);
state->commit = NULL;
+
+ /* Don't copy over a writeback job, they are used only once */
+ state->writeback_job = NULL;
}
EXPORT_SYMBOL(__drm_atomic_helper_connector_duplicate_state);

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 9b9ba5d5ec0cb..d031e46ebffcf 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -87,6 +87,7 @@ static struct drm_conn_prop_enum_list drm_connector_enum_list[] = {
{ DRM_MODE_CONNECTOR_VIRTUAL, "Virtual" },
{ DRM_MODE_CONNECTOR_DSI, "DSI" },
{ DRM_MODE_CONNECTOR_DPI, "DPI" },
+ { DRM_MODE_CONNECTOR_WRITEBACK, "Writeback" },
};

void drm_connector_ida_init(void)
@@ -249,7 +250,8 @@ int drm_connector_init(struct drm_device *dev,
config->num_connector++;
spin_unlock_irq(&config->connector_list_lock);

- if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL)
+ if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL &&
+ connector_type != DRM_MODE_CONNECTOR_WRITEBACK)
drm_object_attach_property(&connector->base,
config->edid_property,
0);
diff --git a/drivers/gpu/drm/drm_writeback.c b/drivers/gpu/drm/drm_writeback.c
new file mode 100644
index 0000000000000..e5b8a4b79724b
--- /dev/null
+++ b/drivers/gpu/drm/drm_writeback.c
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) COPYRIGHT 2016 ARM Limited. All rights reserved.
+ * Author: Brian Starkey <brian.starkey@xxxxxxx>
+ *
+ * This program is free software and is provided to you under the terms of the
+ * GNU General Public License version 2 as published by the Free Software
+ * Foundation, and any use by you of this program is subject to the terms
+ * of such GNU licence.
+ */
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_property.h>
+#include <drm/drm_writeback.h>
+#include <drm/drmP.h>
+
+/**
+ * DOC: overview
+ *
+ * Writeback connectors are used to expose hardware which can write the output
+ * from a CRTC to a memory buffer. They are used and act similarly to other
+ * types of connectors, with some important differences:
+ * - Writeback connectors don't provide a way to output visually to the user.
+ * - Writeback connectors should always report as "disconnected" (so that
+ * clients which don't understand them will ignore them).
+ * - Writeback connectors don't have EDID.
+ *
+ * A framebuffer may only be attached to a writeback connector when the
+ * connector is attached to a CRTC. The WRITEBACK_FB_ID property which sets the
+ * framebuffer applies only to a single commit (see below). A framebuffer may
+ * not be attached while the CRTC is off.
+ *
+ * Writeback connectors have some additional properties, which userspace
+ * can use to query and control them:
+ *
+ * "WRITEBACK_FB_ID":
+ * Write-only object property storing a DRM_MODE_OBJECT_FB: it stores the
+ * framebuffer to be written by the writeback connector. This property is
+ * similar to the FB_ID property on planes, but will always read as zero
+ * and is not preserved across commits.
+ * Userspace must set this property to an output buffer every time it
+ * wishes the buffer to get filled.
+ *
+ * "WRITEBACK_PIXEL_FORMATS":
+ * Immutable blob property to store the supported pixel formats table. The
+ * data is an array of u32 DRM_FORMAT_* fourcc values.
+ * Userspace can use this blob to find out what pixel formats are supported
+ * by the connector's writeback engine.
+ */
+
+static int create_writeback_properties(struct drm_device *dev)
+{
+ struct drm_property *prop;
+
+ if (!dev->mode_config.writeback_fb_id_property) {
+ prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC,
+ "WRITEBACK_FB_ID",
+ DRM_MODE_OBJECT_FB);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.writeback_fb_id_property = prop;
+ }
+
+ if (!dev->mode_config.writeback_pixel_formats_property) {
+ prop = drm_property_create(dev, DRM_MODE_PROP_BLOB |
+ DRM_MODE_PROP_ATOMIC |
+ DRM_MODE_PROP_IMMUTABLE,
+ "WRITEBACK_PIXEL_FORMATS", 0);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.writeback_pixel_formats_property = prop;
+ }
+
+ return 0;
+}
+
+static const struct drm_encoder_funcs drm_writeback_encoder_funcs = {
+ .destroy = drm_encoder_cleanup,
+};
+
+/**
+ * drm_writeback_connector_init - Initialize a writeback connector and its properties
+ * @dev: DRM device
+ * @wb_connector: Writeback connector to initialize
+ * @con_funcs: Connector funcs vtable
+ * @enc_helper_funcs: Encoder helper funcs vtable to be used by the internal encoder
+ * @formats: Array of supported pixel formats for the writeback engine
+ * @n_formats: Length of the formats array
+ *
+ * This function creates the writeback-connector-specific properties if they
+ * have not been already created, initializes the connector as
+ * type DRM_MODE_CONNECTOR_WRITEBACK, and correctly initializes the property
+ * values. It will also create an internal encoder associated with the
+ * drm_writeback_connector and set it to use the @enc_helper_funcs vtable for
+ * the encoder helper.
+ *
+ * Drivers should always use this function instead of drm_connector_init() to
+ * set up writeback connectors.
+ *
+ * Returns: 0 on success, or a negative error code
+ */
+int drm_writeback_connector_init(struct drm_device *dev,
+ struct drm_writeback_connector *wb_connector,
+ const struct drm_connector_funcs *con_funcs,
+ const struct drm_encoder_helper_funcs *enc_helper_funcs,
+ const u32 *formats, int n_formats)
+{
+ struct drm_property_blob *blob;
+ struct drm_connector *connector = &wb_connector->base;
+ struct drm_mode_config *config = &dev->mode_config;
+ int ret = create_writeback_properties(dev);
+
+ if (ret != 0)
+ return ret;
+
+ blob = drm_property_create_blob(dev, n_formats * sizeof(*formats),
+ formats);
+ if (IS_ERR(blob))
+ return PTR_ERR(blob);
+
+ drm_encoder_helper_add(&wb_connector->encoder, enc_helper_funcs);
+ ret = drm_encoder_init(dev, &wb_connector->encoder,
+ &drm_writeback_encoder_funcs,
+ DRM_MODE_ENCODER_VIRTUAL, NULL);
+ if (ret)
+ goto fail;
+
+ connector->interlace_allowed = 0;
+
+ ret = drm_connector_init(dev, connector, con_funcs,
+ DRM_MODE_CONNECTOR_WRITEBACK);
+ if (ret)
+ goto connector_fail;
+
+ ret = drm_mode_connector_attach_encoder(connector,
+ &wb_connector->encoder);
+ if (ret)
+ goto attach_fail;
+
+ INIT_LIST_HEAD(&wb_connector->job_queue);
+ spin_lock_init(&wb_connector->job_lock);
+
+ drm_object_attach_property(&connector->base,
+ config->writeback_fb_id_property, 0);
+
+ drm_object_attach_property(&connector->base,
+ config->writeback_pixel_formats_property,
+ blob->base.id);
+ wb_connector->pixel_formats_blob_ptr = blob;
+
+ return 0;
+
+attach_fail:
+ drm_connector_cleanup(connector);
+connector_fail:
+ drm_encoder_cleanup(&wb_connector->encoder);
+fail:
+ drm_property_blob_put(blob);
+ return ret;
+}
+EXPORT_SYMBOL(drm_writeback_connector_init);
+
+/**
+ * drm_writeback_queue_job - Queue a writeback job for later signalling
+ * @wb_connector: The writeback connector to queue a job on
+ * @job: The job to queue
+ *
+ * This function adds a job to the job_queue for a writeback connector. It
+ * should be considered to take ownership of the writeback job, and so any other
+ * references to the job must be cleared after calling this function.
+ *
+ * Drivers must ensure that for a given writeback connector, jobs are queued in
+ * exactly the same order as they will be completed by the hardware (and
+ * signaled via drm_writeback_signal_completion).
+ *
+ * For every call to drm_writeback_queue_job() there must be exactly one call to
+ * drm_writeback_signal_completion()
+ *
+ * See also: drm_writeback_signal_completion()
+ */
+void drm_writeback_queue_job(struct drm_writeback_connector *wb_connector,
+ struct drm_writeback_job *job)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&wb_connector->job_lock, flags);
+ list_add_tail(&job->list_entry, &wb_connector->job_queue);
+ spin_unlock_irqrestore(&wb_connector->job_lock, flags);
+}
+EXPORT_SYMBOL(drm_writeback_queue_job);
+
+/*
+ * @cleanup_work: deferred cleanup of a writeback job
+ *
+ * The job cannot be cleaned up directly in drm_writeback_signal_completion,
+ * because it may be called in interrupt context. Dropping the framebuffer
+ * reference can sleep, and so the cleanup is deferred to a workqueue.
+ */
+static void cleanup_work(struct work_struct *work)
+{
+ struct drm_writeback_job *job = container_of(work,
+ struct drm_writeback_job,
+ cleanup_work);
+ drm_framebuffer_put(job->fb);
+ kfree(job);
+}
+
+
+/**
+ * drm_writeback_signal_completion - Signal the completion of a writeback job
+ * @wb_connector: The writeback connector whose job is complete
+ *
+ * Drivers should call this to signal the completion of a previously queued
+ * writeback job. It should be called as soon as possible after the hardware
+ * has finished writing, and may be called from interrupt context.
+ * It is the driver's responsibility to ensure that for a given connector, the
+ * hardware completes writeback jobs in the same order as they are queued.
+ *
+ * Unless the driver is holding its own reference to the framebuffer, it must
+ * not be accessed after calling this function.
+ *
+ * See also: drm_writeback_queue_job()
+ */
+void
+drm_writeback_signal_completion(struct drm_writeback_connector *wb_connector)
+{
+ unsigned long flags;
+ struct drm_writeback_job *job;
+
+ spin_lock_irqsave(&wb_connector->job_lock, flags);
+ job = list_first_entry_or_null(&wb_connector->job_queue,
+ struct drm_writeback_job,
+ list_entry);
+ if (job)
+ list_del(&job->list_entry);
+ spin_unlock_irqrestore(&wb_connector->job_lock, flags);
+
+ if (WARN_ON(!job))
+ return;
+
+ INIT_WORK(&job->cleanup_work, cleanup_work);
+ queue_work(system_long_wq, &job->cleanup_work);
+}
+EXPORT_SYMBOL(drm_writeback_signal_completion);
diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
index a57a8aa90ffb7..a5e904105db3a 100644
--- a/include/drm/drm_atomic.h
+++ b/include/drm/drm_atomic.h
@@ -594,6 +594,9 @@ void drm_atomic_set_fence_for_plane(struct drm_plane_state *plane_state,
int __must_check
drm_atomic_set_crtc_for_connector(struct drm_connector_state *conn_state,
struct drm_crtc *crtc);
+int drm_atomic_set_writeback_fb_for_connector(
+ struct drm_connector_state *conn_state,
+ struct drm_framebuffer *fb);
int __must_check
drm_atomic_add_affected_connectors(struct drm_atomic_state *state,
struct drm_crtc *crtc);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 675cc3f8cf852..60c0ffb947d5e 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -429,6 +429,19 @@ struct drm_connector_state {
* protection. This is most commonly used for HDCP.
*/
unsigned int content_protection;
+
+ /**
+ * @writeback_job: Writeback job for writeback connectors
+ *
+ * Holds the framebuffer for a writeback connector. As the writeback
+ * completion may be asynchronous to the normal commit cycle, the
+ * writeback job lifetime is managed separately from the normal atomic
+ * state by this object.
+ *
+ * See also: drm_writeback_queue_job() and
+ * drm_writeback_signal_completion()
+ */
+ struct drm_writeback_job *writeback_job;
};

/**
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 33b3a96d66d0a..9ca32bf7bf183 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -779,6 +779,21 @@ struct drm_mode_config {
*/
struct drm_property *panel_orientation_property;

+ /**
+ * @writeback_fb_id_property: Property for writeback connectors, storing
+ * the ID of the output framebuffer.
+ * See also: drm_writeback_connector_init()
+ */
+ struct drm_property *writeback_fb_id_property;
+
+ /**
+ * @writeback_pixel_formats_property: Property for writeback connectors,
+ * storing an array of the supported pixel formats for the writeback
+ * engine (read-only).
+ * See also: drm_writeback_connector_init()
+ */
+ struct drm_property *writeback_pixel_formats_property;
+
/* dumb ioctl parameters */
uint32_t preferred_depth, prefer_shadow;

diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h
index 35e2a3a79fc56..3b289773297c2 100644
--- a/include/drm/drm_modeset_helper_vtables.h
+++ b/include/drm/drm_modeset_helper_vtables.h
@@ -974,6 +974,17 @@ struct drm_connector_helper_funcs {
*/
int (*atomic_check)(struct drm_connector *connector,
struct drm_connector_state *state);
+
+ /**
+ * @atomic_commit:
+ *
+ * This hook is to be used by drivers implementing writeback connectors
+ * that need a point when to commit the writeback job to the hardware.
+ *
+ * This callback is used by the atomic modeset helpers.
+ */
+ void (*atomic_commit)(struct drm_connector *connector,
+ struct drm_writeback_job *writeback_job);
};

/**
diff --git a/include/drm/drm_writeback.h b/include/drm/drm_writeback.h
new file mode 100644
index 0000000000000..17cd1feecd7e5
--- /dev/null
+++ b/include/drm/drm_writeback.h
@@ -0,0 +1,91 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) COPYRIGHT 2016 ARM Limited. All rights reserved.
+ * Author: Brian Starkey <brian.starkey@xxxxxxx>
+ *
+ * This program is free software and is provided to you under the terms of the
+ * GNU General Public License version 2 as published by the Free Software
+ * Foundation, and any use by you of this program is subject to the terms
+ * of such GNU licence.
+ */
+
+#ifndef __DRM_WRITEBACK_H__
+#define __DRM_WRITEBACK_H__
+#include <drm/drm_connector.h>
+#include <drm/drm_encoder.h>
+#include <linux/workqueue.h>
+
+struct drm_writeback_connector {
+ struct drm_connector base;
+
+ /**
+ * @encoder: Internal encoder used by the connector to fulfill
+ * the DRM framework requirements. The users of the
+ * @drm_writeback_connector control the behaviour of the @encoder
+ * by passing the @enc_funcs parameter to drm_writeback_connector_init()
+ * function.
+ */
+ struct drm_encoder encoder;
+
+ /**
+ * @pixel_formats_blob_ptr:
+ *
+ * DRM blob property data for the pixel formats list on writeback
+ * connectors
+ * See also drm_writeback_connector_init()
+ */
+ struct drm_property_blob *pixel_formats_blob_ptr;
+
+ /** @job_lock: Protects job_queue */
+ spinlock_t job_lock;
+
+ /**
+ * @job_queue:
+ *
+ * Holds a list of a connector's writeback jobs; the last item is the
+ * most recent. The first item may be either waiting for the hardware
+ * to begin writing, or currently being written.
+ *
+ * See also: drm_writeback_queue_job() and
+ * drm_writeback_signal_completion()
+ */
+ struct list_head job_queue;
+};
+
+struct drm_writeback_job {
+ /**
+ * @cleanup_work:
+ *
+ * Used to allow drm_writeback_signal_completion to defer dropping the
+ * framebuffer reference to a workqueue
+ */
+ struct work_struct cleanup_work;
+
+ /**
+ * @list_entry:
+ *
+ * List item for the writeback connector's @job_queue
+ */
+ struct list_head list_entry;
+
+ /**
+ * @fb:
+ *
+ * Framebuffer to be written to by the writeback connector. Do not set
+ * directly, use drm_atomic_set_writeback_fb_for_connector()
+ */
+ struct drm_framebuffer *fb;
+};
+
+int drm_writeback_connector_init(struct drm_device *dev,
+ struct drm_writeback_connector *wb_connector,
+ const struct drm_connector_funcs *con_funcs,
+ const struct drm_encoder_helper_funcs *enc_helper_funcs,
+ const u32 *formats, int n_formats);
+
+void drm_writeback_queue_job(struct drm_writeback_connector *wb_connector,
+ struct drm_writeback_job *job);
+
+void drm_writeback_cleanup_job(struct drm_writeback_job *job);
+void drm_writeback_signal_completion(struct drm_writeback_connector *wb_connector);
+#endif
diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
index 4b3a1bb58e680..3e6541f0400b8 100644
--- a/include/uapi/drm/drm_mode.h
+++ b/include/uapi/drm/drm_mode.h
@@ -344,6 +344,7 @@ enum drm_mode_subconnector {
#define DRM_MODE_CONNECTOR_VIRTUAL 15
#define DRM_MODE_CONNECTOR_DSI 16
#define DRM_MODE_CONNECTOR_DPI 17
+#define DRM_MODE_CONNECTOR_WRITEBACK 18

struct drm_mode_get_connector {

--
2.17.1