[PATCH v8 1/5] drm: mali-dp: Add support for writeback on DP550/DP650
From: Liviu Dudau
Date: Tue Jun 12 2018 - 10:08:38 EST
Mali-DP display processors are able to write the composition result to a
memory buffer via the SE.
Add entry points in the HAL for enabling/disabling this feature, and
implement support for it on DP650 and DP550. DP500 acts differently and
so is omitted from this change.
Changes since v3:
- Fix missing vsync interrupt for DP550
Signed-off-by: Liviu Dudau <Liviu.Dudau@xxxxxxx>
Signed-off-by: Brian Starkey <brian.starkey@xxxxxxx>
[rebased and fixed conflicts]
Signed-off-by: Mihail Atanassov <mihail.atanassov@xxxxxxx>
---
drivers/gpu/drm/arm/malidp_hw.c | 55 +++++++++++++++++++++++++++++--
drivers/gpu/drm/arm/malidp_hw.h | 17 ++++++++++
drivers/gpu/drm/arm/malidp_regs.h | 15 +++++++++
3 files changed, 85 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/arm/malidp_hw.c b/drivers/gpu/drm/arm/malidp_hw.c
index d789b46dc8173..7a48a0defd90a 100644
--- a/drivers/gpu/drm/arm/malidp_hw.c
+++ b/drivers/gpu/drm/arm/malidp_hw.c
@@ -588,6 +588,49 @@ static long malidp550_se_calc_mclk(struct malidp_hw_device *hwdev,
return ret;
}
+static int malidp550_enable_memwrite(struct malidp_hw_device *hwdev,
+ dma_addr_t *addrs, s32 *pitches,
+ int num_planes, u16 w, u16 h, u32 fmt_id)
+{
+ u32 base = MALIDP550_SE_MEMWRITE_BASE;
+ u32 de_base = malidp_get_block_base(hwdev, MALIDP_DE_BLOCK);
+
+ /* enable the scaling engine block */
+ malidp_hw_setbits(hwdev, MALIDP_SCALE_ENGINE_EN, de_base + MALIDP_DE_DISPLAY_FUNC);
+
+ malidp_hw_write(hwdev, fmt_id, base + MALIDP_MW_FORMAT);
+ switch (num_planes) {
+ case 2:
+ malidp_hw_write(hwdev, lower_32_bits(addrs[1]), base + MALIDP_MW_P2_PTR_LOW);
+ malidp_hw_write(hwdev, upper_32_bits(addrs[1]), base + MALIDP_MW_P2_PTR_HIGH);
+ malidp_hw_write(hwdev, pitches[1], base + MALIDP_MW_P2_STRIDE);
+ /* fall through */
+ case 1:
+ malidp_hw_write(hwdev, lower_32_bits(addrs[0]), base + MALIDP_MW_P1_PTR_LOW);
+ malidp_hw_write(hwdev, upper_32_bits(addrs[0]), base + MALIDP_MW_P1_PTR_HIGH);
+ malidp_hw_write(hwdev, pitches[0], base + MALIDP_MW_P1_STRIDE);
+ break;
+ default:
+ WARN(1, "Invalid number of planes");
+ }
+
+ malidp_hw_write(hwdev, MALIDP_DE_H_ACTIVE(w) | MALIDP_DE_V_ACTIVE(h),
+ MALIDP550_SE_MEMWRITE_OUT_SIZE);
+ malidp_hw_setbits(hwdev, MALIDP550_SE_MEMWRITE_ONESHOT | MALIDP_SE_MEMWRITE_EN,
+ MALIDP550_SE_CONTROL);
+
+ return 0;
+}
+
+static void malidp550_disable_memwrite(struct malidp_hw_device *hwdev)
+{
+ u32 base = malidp_get_block_base(hwdev, MALIDP_DE_BLOCK);
+
+ malidp_hw_clearbits(hwdev, MALIDP550_SE_MEMWRITE_ONESHOT | MALIDP_SE_MEMWRITE_EN,
+ MALIDP550_SE_CONTROL);
+ malidp_hw_clearbits(hwdev, MALIDP_SCALE_ENGINE_EN, base + MALIDP_DE_DISPLAY_FUNC);
+}
+
static int malidp650_query_hw(struct malidp_hw_device *hwdev)
{
u32 conf = malidp_hw_read(hwdev, MALIDP550_CONFIG_ID);
@@ -673,9 +716,11 @@ const struct malidp_hw malidp_device[MALIDP_MAX_DEVICES] = {
.se_irq_map = {
.irq_mask = MALIDP550_SE_IRQ_EOW |
MALIDP550_SE_IRQ_AXI_ERR,
+ .vsync_irq = MALIDP550_SE_IRQ_EOW,
},
.dc_irq_map = {
- .irq_mask = MALIDP550_DC_IRQ_CONF_VALID,
+ .irq_mask = MALIDP550_DC_IRQ_CONF_VALID |
+ MALIDP550_DC_IRQ_SE,
.vsync_irq = MALIDP550_DC_IRQ_CONF_VALID,
},
.pixel_formats = malidp550_de_formats,
@@ -691,6 +736,8 @@ const struct malidp_hw malidp_device[MALIDP_MAX_DEVICES] = {
.rotmem_required = malidp550_rotmem_required,
.se_set_scaling_coeffs = malidp550_se_set_scaling_coeffs,
.se_calc_mclk = malidp550_se_calc_mclk,
+ .enable_memwrite = malidp550_enable_memwrite,
+ .disable_memwrite = malidp550_disable_memwrite,
.features = 0,
},
[MALIDP_650] = {
@@ -711,9 +758,11 @@ const struct malidp_hw malidp_device[MALIDP_MAX_DEVICES] = {
.se_irq_map = {
.irq_mask = MALIDP550_SE_IRQ_EOW |
MALIDP550_SE_IRQ_AXI_ERR,
+ .vsync_irq = MALIDP550_SE_IRQ_EOW,
},
.dc_irq_map = {
- .irq_mask = MALIDP550_DC_IRQ_CONF_VALID,
+ .irq_mask = MALIDP550_DC_IRQ_CONF_VALID |
+ MALIDP550_DC_IRQ_SE,
.vsync_irq = MALIDP550_DC_IRQ_CONF_VALID,
},
.pixel_formats = malidp550_de_formats,
@@ -729,6 +778,8 @@ const struct malidp_hw malidp_device[MALIDP_MAX_DEVICES] = {
.rotmem_required = malidp550_rotmem_required,
.se_set_scaling_coeffs = malidp550_se_set_scaling_coeffs,
.se_calc_mclk = malidp550_se_calc_mclk,
+ .enable_memwrite = malidp550_enable_memwrite,
+ .disable_memwrite = malidp550_disable_memwrite,
.features = 0,
},
};
diff --git a/drivers/gpu/drm/arm/malidp_hw.h b/drivers/gpu/drm/arm/malidp_hw.h
index b5dd6c73ec9f2..72cc22f828360 100644
--- a/drivers/gpu/drm/arm/malidp_hw.h
+++ b/drivers/gpu/drm/arm/malidp_hw.h
@@ -177,6 +177,23 @@ struct malidp_hw {
long (*se_calc_mclk)(struct malidp_hw_device *hwdev,
struct malidp_se_config *se_config,
struct videomode *vm);
+ /**
+ * Enable writing to memory the content of the next frame
+ * @param hwdev - malidp_hw_device structure containing the HW description
+ * @param addrs - array of addresses for each plane
+ * @param pitches - array of pitches for each plane
+ * @param num_planes - number of planes to be written
+ * @param w - width of the output frame
+ * @param h - height of the output frame
+ * @param fmt_id - internal format ID of output buffer
+ */
+ int (*enable_memwrite)(struct malidp_hw_device *hwdev, dma_addr_t *addrs,
+ s32 *pitches, int num_planes, u16 w, u16 h, u32 fmt_id);
+
+ /*
+ * Disable the writing to memory of the next frame's content.
+ */
+ void (*disable_memwrite)(struct malidp_hw_device *hwdev);
u8 features;
};
diff --git a/drivers/gpu/drm/arm/malidp_regs.h b/drivers/gpu/drm/arm/malidp_regs.h
index 149024fb44327..e2b2c496225e3 100644
--- a/drivers/gpu/drm/arm/malidp_regs.h
+++ b/drivers/gpu/drm/arm/malidp_regs.h
@@ -66,6 +66,8 @@
#define MALIDP_DISP_FUNC_GAMMA (1 << 0)
#define MALIDP_DISP_FUNC_CADJ (1 << 4)
#define MALIDP_DISP_FUNC_ILACED (1 << 8)
+#define MALIDP_SCALE_ENGINE_EN (1 << 16)
+#define MALIDP_SE_MEMWRITE_EN (2 << 5)
/* register offsets for IRQ management */
#define MALIDP_REG_STATUS 0x00000
@@ -153,6 +155,16 @@
(((x) & MALIDP_SE_ENH_LIMIT_MASK) << 16)
#define MALIDP_SE_ENH_COEFF0 0x04
+
+/* register offsets relative to MALIDP5x0_SE_MEMWRITE_BASE */
+#define MALIDP_MW_FORMAT 0x00000
+#define MALIDP_MW_P1_STRIDE 0x00004
+#define MALIDP_MW_P2_STRIDE 0x00008
+#define MALIDP_MW_P1_PTR_LOW 0x0000c
+#define MALIDP_MW_P1_PTR_HIGH 0x00010
+#define MALIDP_MW_P2_PTR_LOW 0x0002c
+#define MALIDP_MW_P2_PTR_HIGH 0x00030
+
/* register offsets and bits specific to DP500 */
#define MALIDP500_ADDR_SPACE_SIZE 0x01000
#define MALIDP500_DC_BASE 0x00000
@@ -217,6 +229,9 @@
#define MALIDP550_DE_PERF_BASE 0x00500
#define MALIDP550_SE_BASE 0x08000
#define MALIDP550_SE_CONTROL 0x08010
+#define MALIDP550_SE_MEMWRITE_ONESHOT (1 << 7)
+#define MALIDP550_SE_MEMWRITE_OUT_SIZE 0x08030
+#define MALIDP550_SE_MEMWRITE_BASE 0x08100
#define MALIDP550_DC_BASE 0x0c000
#define MALIDP550_DC_CONTROL 0x0c010
#define MALIDP550_DC_CONFIG_REQ (1 << 16)
--
2.17.1