Re: [PATCH 14/28] drm/mediatek: add connection from RDMA1 to DPI1

[CK Hu]

Hi, Stu:

On Wed, 2018-06-13 at 15:56 +0800, Stu Hsieh wrote:
> Hi, CK:
> 
> On Wed, 2018-06-13 at 14:13 +0800, CK Hu wrote:
> > Hi, Stu:
> > 
> > On Mon, 2018-06-11 at 11:26 +0800, Stu Hsieh wrote:
> > > This patch add the connection from RDMA1 to DPI1
> > > 
> > > Signed-off-by: Stu Hsieh <stu.hsieh@xxxxxxxxxxxx>
> > > ---
> > >  drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 8 ++++++++
> > >  1 file changed, 8 insertions(+)
> > > 
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > > index fed1b5704355..4abd5dabeccf 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > > @@ -85,7 +85,9 @@
> > >  #define RDMA0_MOUT_DSI2			0x4
> > >  #define RDMA0_MOUT_DSI3			0x5
> > >  #define RDMA1_MOUT_DPI0			0x2
> > > +#define RDMA1_MOUT_DPI1			0x3
> > 
> > Usually, each bit of a mout register represent a output enable. Is this
> > value 0x3 a correct value?
> > 
> > Regards,
> > CK
> > 
> In HW CONFIG SPEC show as following
> 
> Bit(s)	Name			Description
> 2:0	DISP_PATH1_SOUT_SEL_IN	0 : Output to DSI0
> 				1:  Ooutput to DSI1
> 				2:  Ooutput to DPI
> 				3:  Ooutput to DPI1
> 				4:  Ooutput to DSI2
> 				5:  Ooutput to DSI3
> 				6 : reserved
> 				7:  Ooutput to DISP_UFOE
> 
> So, 0x3 is correct value

It looks like that RDMA1 output is also SOUT, use the naming SOUT would
be better. 

Regards,
CK

> 
> Regard,
> Stu
> 
> 
> > >  #define DPI0_SEL_IN_RDMA1		0x1
> > > +#define DPI1_SEL_IN_RDMA1		(0x1 << 8)
> > >  #define COLOR1_SEL_IN_OVL1		0x1
> > >  
> > >  #define OVL_MOUT_EN_RDMA		0x1
> > > @@ -171,6 +173,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
> > >  	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
> > >  		*addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
> > >  		value = RDMA1_MOUT_DPI0;
> > > +	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
> > > +		*addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
> > > +		value = RDMA1_MOUT_DPI1;
> > >  	} else {
> > >  		value = 0;
> > >  	}
> > > @@ -190,6 +195,9 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id cur,
> > >  	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
> > >  		*addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > >  		value = DPI0_SEL_IN_RDMA1;
> > > +	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
> > > +		*addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > > +		value = DPI1_SEL_IN_RDMA1;
> > >  	} else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) {
> > >  		*addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN;
> > >  		value = COLOR1_SEL_IN_OVL1;
> > 
> > 
> 
>