Re: [PATCH 2/7] clk: intel: Add clock driver for GRX500 SoC

[Rob Herring]

On Thu, Jun 14, 2018 at 2:40 AM, yixin zhu <yixin.zhu@xxxxxxxxxxxxxxx> wrote:
>
>
> On 6/13/2018 6:37 AM, Rob Herring wrote:
>>
>> On Tue, Jun 12, 2018 at 01:40:29PM +0800, Songjun Wu wrote:
>>>
>>> From: Yixin Zhu <yixin.zhu@xxxxxxxxxxxxxxx>
>>>
>>> PLL of GRX500 provide clock to DDR, CPU, and peripherals as show below

[...]

>>> +Example:
>>> +       clkgate0: clkgate0 {
>>> +               #clock-cells = <1>;
>>> +               compatible = "intel,grx500-gate0-clk";
>>> +               reg = <0x114>;
>>> +               clock-output-names = "gate_xbar0", "gate_xbar1",
>>> "gate_xbar2",
>>> +               "gate_xbar3", "gate_xbar6", "gate_xbar7";
>>> +       };
>>
>>
>> We generally don't do a clock node per clock or few clocks but rather 1
>> clock node per clock controller block. See any recent clock bindings.
>>
>> Rob
>
> Do you mean only one example is needed per clock controller block?
> cpuclk is not needed in the document?

No, I mean generally we have 1 DT node for the h/w block with all the
clock control registers rather than nodes with a single register and 1
or a couple of clocks. Sometimes the clock registers are mixed with
other functions which complicates things a bit. But I can't tell that
here because you haven't documented what's in the rest of the register
space.

Rob