Re: [PATCH v4] dcdbas: Add support for WSMT ACPI table
From: Andy Shevchenko
Date: Thu Jun 14 2018 - 13:26:55 EST
On Thu, Jun 14, 2018 at 6:45 PM, Stuart Hayes <stuart.w.hayes@xxxxxxxxx> wrote:
>
> If the WSMT ACPI table is present and indicates that a fixed communication
> buffer should be used, use the firmware-specified buffer instead of
> allocating a buffer in memory for communications between the dcdbas driver
> and firmare.
Thanks for an update.
I answered to previous thread. The questions / comments are still
applicable here.
> Signed-off-by: Stuart Hayes <stuart.w.hayes@xxxxxxxxx>
> ---
> v2 Bumped driver version to 5.6.0-3.3
> v3 Removed dependency on ACPI in Kconfig
> Moved the added #include to be in alphabetical order
> Added comments in smi_request_store()
> Simplified checksum code
> Changed loop searching 0xf0000 to be more readable
> Reworked calculation of remap_size & smi_data_buf_size
> v4 Fixed comment that starts with "Calling Interface SMI"
> Fixed formatting of first "if" statement in dcdbas_check_wsmt()
>
>
> drivers/firmware/dcdbas.c | 118 +++++++++++++++++++++++++++++++++++++++++++---
> drivers/firmware/dcdbas.h | 10 ++++
> 2 files changed, 122 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/firmware/dcdbas.c b/drivers/firmware/dcdbas.c
> index 0bdea60c65dd..4cac70d05bfc 100644
> --- a/drivers/firmware/dcdbas.c
> +++ b/drivers/firmware/dcdbas.c
> @@ -21,6 +21,7 @@
> */
>
> #include <linux/platform_device.h>
> +#include <linux/acpi.h>
> #include <linux/dma-mapping.h>
> #include <linux/errno.h>
> #include <linux/cpu.h>
> @@ -41,7 +42,7 @@
> #include "dcdbas.h"
>
> #define DRIVER_NAME "dcdbas"
> -#define DRIVER_VERSION "5.6.0-3.2"
> +#define DRIVER_VERSION "5.6.0-3.3"
> #define DRIVER_DESCRIPTION "Dell Systems Management Base Driver"
>
> static struct platform_device *dcdbas_pdev;
> @@ -49,19 +50,23 @@ static struct platform_device *dcdbas_pdev;
> static u8 *smi_data_buf;
> static dma_addr_t smi_data_buf_handle;
> static unsigned long smi_data_buf_size;
> +static unsigned long max_smi_data_buf_size = MAX_SMI_DATA_BUF_SIZE;
> static u32 smi_data_buf_phys_addr;
> static DEFINE_MUTEX(smi_data_lock);
> +static u8 *eps_buffer;
>
> static unsigned int host_control_action;
> static unsigned int host_control_smi_type;
> static unsigned int host_control_on_shutdown;
>
> +static bool wsmt_enabled;
> +
> /**
> * smi_data_buf_free: free SMI data buffer
> */
> static void smi_data_buf_free(void)
> {
> - if (!smi_data_buf)
> + if (!smi_data_buf || wsmt_enabled)
> return;
>
> dev_dbg(&dcdbas_pdev->dev, "%s: phys: %x size: %lu\n",
> @@ -86,7 +91,7 @@ static int smi_data_buf_realloc(unsigned long size)
> if (smi_data_buf_size >= size)
> return 0;
>
> - if (size > MAX_SMI_DATA_BUF_SIZE)
> + if (size > max_smi_data_buf_size)
> return -EINVAL;
>
> /* new buffer is needed */
> @@ -169,7 +174,7 @@ static ssize_t smi_data_write(struct file *filp, struct kobject *kobj,
> {
> ssize_t ret;
>
> - if ((pos + count) > MAX_SMI_DATA_BUF_SIZE)
> + if ((pos + count) > max_smi_data_buf_size)
> return -EINVAL;
>
> mutex_lock(&smi_data_lock);
> @@ -322,8 +327,15 @@ static ssize_t smi_request_store(struct device *dev,
> ret = count;
> break;
> case 1:
> - /* Calling Interface SMI */
> - smi_cmd->ebx = (u32) virt_to_phys(smi_cmd->command_buffer);
> + /*
> + * Calling Interface SMI
> + *
> + * Provide physical address of command buffer field within
> + * the struct smi_cmd... can't use virt_to_phys() on smi_cmd
> + * because address may be from memremap().
> + */
> + smi_cmd->ebx = smi_data_buf_phys_addr +
> + offsetof(struct smi_cmd, command_buffer);
> ret = dcdbas_smi_request(smi_cmd);
> if (!ret)
> ret = count;
> @@ -482,6 +494,93 @@ static void dcdbas_host_control(void)
> }
> }
>
> +/* WSMT */
> +
> +static u8 checksum(u8 *buffer, u8 length)
> +{
> + u8 sum = 0;
> + u8 *end = buffer + length;
> +
> + while (buffer < end)
> + sum += *buffer++;
> + return sum;
> +}
> +
> +static inline struct smm_eps_table *check_eps_table(u8 *addr)
> +{
> + struct smm_eps_table *eps = (struct smm_eps_table *)addr;
> +
> + if (strncmp(eps->smm_comm_buff_anchor, SMM_EPS_SIG, 4) != 0)
> + return NULL;
> +
> + if (checksum(addr, eps->length) != 0)
> + return NULL;
> +
> + return eps;
> +}
> +
> +static int dcdbas_check_wsmt(void)
> +{
> + struct acpi_table_wsmt *wsmt = NULL;
> + struct smm_eps_table *eps = NULL;
> + u64 remap_size;
> + u8 *addr;
> +
> + acpi_get_table(ACPI_SIG_WSMT, 0, (struct acpi_table_header **)&wsmt);
> + if (!wsmt)
> + return 0;
> +
> + /* Check if WSMT ACPI table shows that protection is enabled */
> + if (!(wsmt->protection_flags & ACPI_WSMT_FIXED_COMM_BUFFERS) ||
> + !(wsmt->protection_flags & ACPI_WSMT_COMM_BUFFER_NESTED_PTR_PROTECTION))
> + return 0;
> +
> + /* Scan for EPS (entry point structure) */
> + for (addr = (u8 *)__va(0xf0000);
> + addr < (u8 *)__va(0x100000 - sizeof(struct smm_eps_table));
> + addr += 1) {
> + eps = check_eps_table(addr);
> + if (eps)
> + break;
> + }
> +
> + if (!eps) {
> + dev_dbg(&dcdbas_pdev->dev, "found WSMT, but no EPS found\n");
> + return -ENODEV;
> + }
> +
> + /*
> + * Get physical address of buffer and map to virtual address.
> + * Table gives size in 4K pages, regardless of actual system page size.
> + */
> + if (upper_32_bits(eps->smm_comm_buff_addr + 8)) {
> + dev_warn(&dcdbas_pdev->dev, "found WSMT, but EPS buffer address is above 4GB\n");
> + return -EINVAL;
> + }
> + /*
> + * Limit remap size to MAX_SMI_DATA_BUF_SIZE + 8 (since the first 8
> + * bytes are used for a semaphore, not the data buffer itself).
> + */
> + remap_size = eps->num_of_4k_pages * PAGE_SIZE;
> + if (remap_size > MAX_SMI_DATA_BUF_SIZE + 8)
> + remap_size = MAX_SMI_DATA_BUF_SIZE + 8;
> + eps_buffer = memremap(eps->smm_comm_buff_addr, remap_size, MEMREMAP_WB);
> + if (!eps_buffer) {
> + dev_warn(&dcdbas_pdev->dev, "found WSMT, but failed to map EPS buffer\n");
> + return -ENOMEM;
> + }
> +
> + /* First 8 bytes is for a semaphore, not part of the smi_data_buf */
> + smi_data_buf_phys_addr = eps->smm_comm_buff_addr + 8;
> + smi_data_buf = eps_buffer + 8;
> + smi_data_buf_size = remap_size - 8;
> + max_smi_data_buf_size = smi_data_buf_size;
> + wsmt_enabled = true;
> + dev_info(&dcdbas_pdev->dev,
> + "WSMT found, using firmware-provided SMI buffer.\n");
> + return 1;
> +}
> +
> /**
> * dcdbas_reboot_notify: handle reboot notification for host control
> */
> @@ -548,6 +647,11 @@ static int dcdbas_probe(struct platform_device *dev)
>
> dcdbas_pdev = dev;
>
> + /* Check if ACPI WSMT table specifies protected SMI buffer address */
> + error = dcdbas_check_wsmt();
> + if (error < 0)
> + return error;
> +
> /*
> * BIOS SMI calls require buffer addresses be in 32-bit address space.
> * This is done by setting the DMA mask below.
> @@ -635,6 +739,8 @@ static void __exit dcdbas_exit(void)
> */
> if (dcdbas_pdev)
> smi_data_buf_free();
> + if (eps_buffer)
> + memunmap(eps_buffer);
> platform_device_unregister(dcdbas_pdev_reg);
> platform_driver_unregister(&dcdbas_driver);
> }
> diff --git a/drivers/firmware/dcdbas.h b/drivers/firmware/dcdbas.h
> index ca3cb0a54ab6..52729a494b00 100644
> --- a/drivers/firmware/dcdbas.h
> +++ b/drivers/firmware/dcdbas.h
> @@ -53,6 +53,7 @@
> #define EXPIRED_TIMER (0)
>
> #define SMI_CMD_MAGIC (0x534D4931)
> +#define SMM_EPS_SIG "$SCB"
>
> #define DCDBAS_DEV_ATTR_RW(_name) \
> DEVICE_ATTR(_name,0600,_name##_show,_name##_store);
> @@ -103,5 +104,14 @@ struct apm_cmd {
>
> int dcdbas_smi_request(struct smi_cmd *smi_cmd);
>
> +struct smm_eps_table {
> + char smm_comm_buff_anchor[4];
> + u8 length;
> + u8 checksum;
> + u8 version;
> + u64 smm_comm_buff_addr;
> + u64 num_of_4k_pages;
> +} __packed;
> +
> #endif /* _DCDBAS_H_ */
>
> --
> 2.14.2
>
--
With Best Regards,
Andy Shevchenko