RESEND [PATCH v2 2/3] arm64: compat: Split the sigreturn trampolines and kuser helpers (assembler sources)

[Mark Salyzyn]

From: Kevin Brodsky <kevin.brodsky@xxxxxxx>

AArch32 processes are currently installed a special [vectors] page that
contains the sigreturn trampolines and the kuser helpers, at the fixed
address mandated by the kuser helpers ABI.

Having both functionalities in the same page has become problematic,
because:

* It makes it impossible to disable the kuser helpers (the sigreturn
  trampolines cannot be removed), which is possible on arm.

* A future 32-bit vDSO would provide the sigreturn trampolines itself,
  making those in [vectors] redundant.

This patch addresses the problem by moving the sigreturn trampolines
sources to its own file.  Wrapped the comments to reduce the wrath of
checkpatch.pl.

Signed-off-by: Kevin Brodsky <kevin.brodsky@xxxxxxx>
Signed-off-by: Mark Salyzyn <salyzyn@xxxxxxxxxxx>
Cc: James Morse <james.morse@xxxxxxx>
Cc: Russell King <linux@xxxxxxxxxxxxxxx>
Cc: Catalin Marinas <catalin.marinas@xxxxxxx>
Cc: Will Deacon <will.deacon@xxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
Cc: Dmitry Safonov <dsafonov@xxxxxxxxxxxxx>
Cc: John Stultz <john.stultz@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Laura Abbott <labbott@xxxxxxxxxx>
Cc: Kees Cook <keescook@xxxxxxxxxxxx>
Cc: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
Cc: Andy Gross <andy.gross@xxxxxxxxxx>
Cc: Andrew Pinski <apinski@xxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: Jeremy Linton <Jeremy.Linton@xxxxxxx>

v2:
- split off from previous v1 'arm64: compat: Add CONFIG_KUSER_HELPERS'
- adjust makefile so one line for each of the assembler source modules

v3:
- rebase
---
 arch/arm64/kernel/Makefile      |  4 +-
 arch/arm64/kernel/kuser32.S     | 48 ++---------------------
 arch/arm64/kernel/sigreturn32.S | 67 +++++++++++++++++++++++++++++++++
 3 files changed, 73 insertions(+), 46 deletions(-)
 create mode 100644 arch/arm64/kernel/sigreturn32.S

diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 0025f8691046..9851be3ef932 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -26,8 +26,10 @@ OBJCOPYFLAGS := --prefix-symbols=__efistub_
 $(obj)/%.stub.o: $(obj)/%.o FORCE
 	$(call if_changed,objcopy)
 
-arm64-obj-$(CONFIG_COMPAT)		+= sys32.o kuser32.o signal32.o 	\
+arm64-obj-$(CONFIG_COMPAT)		+= sys32.o signal32.o	\
 					   sys_compat.o entry32.o
+arm64-obj-$(CONFIG_COMPAT)		+= sigreturn32.o
+arm64-obj-$(CONFIG_COMPAT)		+= kuser32.o
 arm64-obj-$(CONFIG_FUNCTION_TRACER)	+= ftrace.o entry-ftrace.o
 arm64-obj-$(CONFIG_MODULES)		+= arm64ksyms.o module.o
 arm64-obj-$(CONFIG_ARM64_MODULE_PLTS)	+= module-plts.o
diff --git a/arch/arm64/kernel/kuser32.S b/arch/arm64/kernel/kuser32.S
index 997e6b27ff6a..d15b5c2935b3 100644
--- a/arch/arm64/kernel/kuser32.S
+++ b/arch/arm64/kernel/kuser32.S
@@ -20,16 +20,13 @@
  *
  * AArch32 user helpers.
  *
- * Each segment is 32-byte aligned and will be moved to the top of the high
- * vector page.  New segments (if ever needed) must be added in front of
- * existing ones.  This mechanism should be used only for things that are
- * really small and justified, and not be abused freely.
+ * These helpers are provided for compatibility with AArch32 binaries that
+ * still need them. They are installed at a fixed address by
+ * aarch32_setup_additional_pages().
  *
  * See Documentation/arm/kernel_user_helpers.txt for formal definitions.
  */
 
-#include <asm/unistd.h>
-
 	.align	5
 	.globl	__kuser_helper_start
 __kuser_helper_start:
@@ -77,42 +74,3 @@ __kuser_helper_version:			// 0xffff0ffc
 	.word	((__kuser_helper_end - __kuser_helper_start) >> 5)
 	.globl	__kuser_helper_end
 __kuser_helper_end:
-
-/*
- * AArch32 sigreturn code
- *
- * For ARM syscalls, the syscall number has to be loaded into r7.
- * We do not support an OABI userspace.
- *
- * For Thumb syscalls, we also pass the syscall number via r7. We therefore
- * need two 16-bit instructions.
- */
-	.globl __aarch32_sigret_code_start
-__aarch32_sigret_code_start:
-
-	/*
-	 * ARM Code
-	 */
-	.byte	__NR_compat_sigreturn, 0x70, 0xa0, 0xe3	// mov	r7, #__NR_compat_sigreturn
-	.byte	__NR_compat_sigreturn, 0x00, 0x00, 0xef	// svc	#__NR_compat_sigreturn
-
-	/*
-	 * Thumb code
-	 */
-	.byte	__NR_compat_sigreturn, 0x27			// svc	#__NR_compat_sigreturn
-	.byte	__NR_compat_sigreturn, 0xdf			// mov	r7, #__NR_compat_sigreturn
-
-	/*
-	 * ARM code
-	 */
-	.byte	__NR_compat_rt_sigreturn, 0x70, 0xa0, 0xe3	// mov	r7, #__NR_compat_rt_sigreturn
-	.byte	__NR_compat_rt_sigreturn, 0x00, 0x00, 0xef	// svc	#__NR_compat_rt_sigreturn
-
-	/*
-	 * Thumb code
-	 */
-	.byte	__NR_compat_rt_sigreturn, 0x27			// svc	#__NR_compat_rt_sigreturn
-	.byte	__NR_compat_rt_sigreturn, 0xdf			// mov	r7, #__NR_compat_rt_sigreturn
-
-        .globl __aarch32_sigret_code_end
-__aarch32_sigret_code_end:
diff --git a/arch/arm64/kernel/sigreturn32.S b/arch/arm64/kernel/sigreturn32.S
new file mode 100644
index 000000000000..6ecda4d84cd5
--- /dev/null
+++ b/arch/arm64/kernel/sigreturn32.S
@@ -0,0 +1,67 @@
+/*
+ * sigreturn trampolines for AArch32.
+ *
+ * Copyright (C) 2005-2011 Nicolas Pitre <nico@xxxxxxxxxxx>
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ *
+ * AArch32 sigreturn code
+ *
+ * For ARM syscalls, the syscall number has to be loaded into r7.
+ * We do not support an OABI userspace.
+ *
+ * For Thumb syscalls, we also pass the syscall number via r7. We therefore
+ * need two 16-bit instructions.
+ */
+
+#include <asm/unistd.h>
+
+	.globl __aarch32_sigret_code_start
+__aarch32_sigret_code_start:
+
+	/*
+	 * ARM Code
+	 */
+	// mov	r7, #__NR_compat_sigreturn
+	.byte	__NR_compat_sigreturn, 0x70, 0xa0, 0xe3
+	// svc	#__NR_compat_sigreturn
+	.byte	__NR_compat_sigreturn, 0x00, 0x00, 0xef
+
+	/*
+	 * Thumb code
+	 */
+	// svc	#__NR_compat_sigreturn
+	.byte	__NR_compat_sigreturn, 0x27
+	// mov	r7, #__NR_compat_sigreturn
+	.byte	__NR_compat_sigreturn, 0xdf
+
+	/*
+	 * ARM code
+	 */
+	// mov	r7, #__NR_compat_rt_sigreturn
+	.byte	__NR_compat_rt_sigreturn, 0x70, 0xa0, 0xe3
+	// svc	#__NR_compat_rt_sigreturn
+	.byte	__NR_compat_rt_sigreturn, 0x00, 0x00, 0xef
+
+	/*
+	 * Thumb code
+	 */
+	// svc	#__NR_compat_rt_sigreturn
+	.byte	__NR_compat_rt_sigreturn, 0x27
+	// mov	r7, #__NR_compat_rt_sigreturn
+	.byte	__NR_compat_rt_sigreturn, 0xdf
+
+        .globl __aarch32_sigret_code_end
+__aarch32_sigret_code_end:
-- 
2.18.0.rc1.244.gcf134e6275-goog