Re: [PATCH v7 4/4] input/power: Add driver for BD71837/BD71847 PMIC power button

[Dmitry Torokhov]

Hi Matti,

On Tue, Jun 19, 2018 at 01:57:09PM +0300, Matti Vaittinen wrote:
> ROHM BD71837 PMIC power button driver providing power-key press
> information to user-space.
> 
> Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
> ---
>  drivers/input/misc/Kconfig          | 10 +++++
>  drivers/input/misc/Makefile         |  1 +
>  drivers/input/misc/bd718xx-pwrkey.c | 90 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 101 insertions(+)
>  create mode 100644 drivers/input/misc/bd718xx-pwrkey.c
> 
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index 572b15fa18c2..694c05d3f9fb 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -96,6 +96,16 @@ config INPUT_ATMEL_CAPTOUCH
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called atmel_captouch.
>  
> +config INPUT_BD718XX_PWRKEY
> +	tristate "ROHM BD71837/BD71847 power key support"
> +	depends on MFD_BD71837
> +	help
> +	  Say Y here if you want support for the power key usually found
> +	  on boards using a ROHM BD71837/BD71847 compatible PMIC.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called bd718xx-pwrkey.
> +
>  config INPUT_BMA150
>  	tristate "BMA150/SMB380 acceleration sensor support"
>  	depends on I2C
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 72cde28649e2..ea5b81cbf2bf 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
>  obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o
>  obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH)	+= atmel_captouch.o
>  obj-$(CONFIG_INPUT_BMA150)		+= bma150.o
> +obj-$(CONFIG_INPUT_BD718XX_PWRKEY)	+= bd718xx-pwrkey.o
>  obj-$(CONFIG_INPUT_CM109)		+= cm109.o
>  obj-$(CONFIG_INPUT_CMA3000)		+= cma3000_d0x.o
>  obj-$(CONFIG_INPUT_CMA3000_I2C)		+= cma3000_d0x_i2c.o
> diff --git a/drivers/input/misc/bd718xx-pwrkey.c b/drivers/input/misc/bd718xx-pwrkey.c
> new file mode 100644
> index 000000000000..e8ac9475c3cf
> --- /dev/null
> +++ b/drivers/input/misc/bd718xx-pwrkey.c
> @@ -0,0 +1,90 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (C) 2018 ROHM Semiconductors
> +// bd718xx-pwrkey.c -- ROHM BD71837MWV and BD71847 power button driver
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/errno.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/mfd/bd71837.h>
> +
> +struct bd718xx_pwrkey {
> +	struct input_dev *idev;
> +	struct bd71837 *mfd;
> +	int irq;
> +};
> +
> +static irqreturn_t button_irq(int irq, void *_priv)
> +{
> +	struct input_dev *idev = (struct input_dev *)_priv;
> +
> +	input_report_key(idev, KEY_POWER, 1);
> +	input_sync(idev);
> +	input_report_key(idev, KEY_POWER, 0);
> +	input_sync(idev);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int bd718xx_pwr_btn_probe(struct platform_device *pdev)
> +{
> +	int err = -ENOMEM;
> +	struct bd718xx_pwrkey *pk;
> +
> +	pk = devm_kzalloc(&pdev->dev, sizeof(*pk), GFP_KERNEL);
> +	if (!pk)
> +		goto err_out;
> +
> +	pk->mfd = dev_get_drvdata(pdev->dev.parent);
> +
> +	pk->idev = devm_input_allocate_device(&pdev->dev);
> +	if (!pk->idev)
> +		goto err_out;
> +
> +	pk->idev->name = "bd718xx-pwrkey";
> +	pk->idev->phys = "bd718xx-pwrkey/input0";
> +	pk->idev->dev.parent = &pdev->dev;
> +
> +	input_set_capability(pk->idev, EV_KEY, KEY_POWER);
> +
> +	err = platform_get_irq_byname(pdev, "pwr-btn-s");
> +	if (err < 0) {
> +		dev_err(&pdev->dev, "could not get power key interrupt\n");
> +		goto err_out;
> +	}
> +
> +	pk->irq = err;
> +	err = devm_request_threaded_irq(&pdev->dev, pk->irq, NULL, &button_irq,
> +					0, "bd718xx-pwrkey", pk);
> +	if (err)
> +		goto err_out;
> +
> +	platform_set_drvdata(pdev, pk);
> +	err = regmap_update_bits(pk->mfd->regmap,
> +				 BD71837_REG_PWRONCONFIG0,
> +				 BD718XX_PWRBTN_SHORT_PRESS_MASK,
> +				 BD718XX_PWRBTN_SHORT_PRESS_10MS);

This seems to be the only custom bit of set up in the driver, the rest I
think can easily be handled by gpio-keys.c in interrupt-only mode. Maybe
we could move this into MFD piece and drop this driver?

> +	if (err)
> +		goto err_out;
> +
> +	err = input_register_device(pk->idev);
> +
> +err_out:
> +
> +	return err;
> +}
> +
> +static struct platform_driver bd718xx_pwr_btn_driver = {
> +	.probe	= bd718xx_pwr_btn_probe,
> +	.driver = {
> +		.name	= "bd718xx-pwrkey",
> +	},
> +};
> +module_platform_driver(bd718xx_pwr_btn_driver);
> +MODULE_DESCRIPTION("Power button driver for buttons connected to ROHM bd71837/bd71847 PMIC");
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>");
> +
> -- 
> 2.14.3
> 

Thanks.

-- 
Dmitry