Re: [PATCH v3 1/2] acpi/nfit: Update nfit driver to comply with ACPI 6.1

[Dan Williams]

On Tue, Jun 19, 2018 at 12:53 PM, Elliott, Robert (Persistent Memory)
<elliott@xxxxxxx> wrote:
>
>
>> -----Original Message-----
>> From: linux-kernel-owner@xxxxxxxxxxxxxxx [mailto:linux-kernel-
>> owner@xxxxxxxxxxxxxxx] On Behalf Of Dan Williams
>> Sent: Tuesday, June 19, 2018 10:29 AM
>> Subject: Re: [PATCH v3 1/2] acpi/nfit: Update nfit driver to comply with
>> ACPI 6.1
> ...
>> >
>> > Here are some examples (kernel 4.17):
>
> Note that these values were as reported on a little-endian system.
>
>> Ok, so the lowest significant byte of the Micron id is supposed to be
>> 0x2c and this text representation matches that. So the bytes are being
>> endian swapped when written to the SPD?
>
> SPD byte 320 is 0x80. That's the bank number byte (with odd parity).
> SPD byte 321 is 0x2c. That's the manufacturer code byte (with odd parity).
>
> If treated as a single 2-byte value, that is:
> * 0x802c (32812 in decimal) if interpreted as big-endian
> * 0x2c80 (11392 in decimal) if interpreted as little-endian

Ok, JEDEC defines byte 320 as the LSB, so the fact that Linux is
showing 0x2c as the LSB is wrong. Linux needs to be fixed.