[PATCH v3 0/3] pinctrl: imx: Add driver for i.MX8MQ

[Abel Vesa]

This is the third version for the patch series sent by Lucas.

https://www.spinics.net/lists/devicetree/msg212752.html

Changes since v2:
 * switch back to the 'fsl,pins' and hardcoded the config values
inside the dts.
 * updated documentation accordingly

Abel Vesa (1):
  dt-bindings: add binding for i.MX8MQ IOMUXC

Lucas Stach (2):
  pinctrl: imx: allow to configure SION with generic pinconf
  pinctrl: imx: add driver for i.MX8MQ

 .../bindings/pinctrl/fsl,imx8mq-pinctrl.txt        |  13 +
 drivers/pinctrl/freescale/Kconfig                  |   7 +
 drivers/pinctrl/freescale/Makefile                 |   1 +
 drivers/pinctrl/freescale/pinctrl-imx.c            |  19 +-
 drivers/pinctrl/freescale/pinctrl-imx.h            |   4 +
 drivers/pinctrl/freescale/pinctrl-imx8mq.c         | 356 +++++++++++++++++++++
 6 files changed, 388 insertions(+), 12 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt
 create mode 100644 drivers/pinctrl/freescale/pinctrl-imx8mq.c

-- 
2.7.4