Re: [PATCH 1/1] arm64: dts: rockchip: correct voltage selector Firefly-RK3399

[Heinrich Schuchardt]

On 06/20/2018 09:57 PM, Heinrich Schuchardt wrote:
> On 06/20/2018 11:15 AM, Heiko StÃbner wrote:
>> Hi Heinrich,
>>
>> Am Mittwoch, 20. Juni 2018, 07:59:34 CEST schrieb Heinrich Schuchardt:
>>> On 06/20/2018 01:21 AM, Heiko Stuebner wrote:
>>>> Am Donnerstag, 14. Juni 2018, 14:55:27 CEST schrieb Heiko Stuebner:
>>>>> Am Montag, 4. Juni 2018, 19:15:23 CEST schrieb Heinrich Schuchardt:
>>>>>> Without this patch the Firefly-RK3399 board boot process hangs after
>>>>>> these
>>>>>>
>>>>>> lines:
>>>>>>    fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
>>>>>>    fan53555-reg: supplied by vcc_sys
>>>>>>    vcc1v8_s3: supplied by vcc_1v8
>>>>>>
>>>>>> Blacklisting driver fan53555 allows booting.
>>>>>>
>>>>>> The device tree uses a value of fcs,suspend-voltage-selector different
>>>>>> to
>>>>>> any other board.
>>>>>>
>>>>>> Changing this setting to the usual value is sufficient to enable
>>>>>> booting.
>>>>>>
>>>>>> Signed-off-by: Heinrich Schuchardt <xypron.glpk@xxxxxx>
>>>>>
>>>>> applied for 4.19.
>>>>
>>>> and dropped again.
>>>>
>>>> Sadly it looks like the patch causes conflicts with at least one firefly
>>>> board in a kernelci lab. My own is currently not ready to use, so I cannot
>>>> look myself right now.
>>>>
>>>> The issue kernelci people described sounded quite a lot like the one
>>>> in your commit message, so my current theory is that the
>>>> suspend-voltage-selector must in some form corespond to the
>>>> cpu_b_sleep_h gpio setting we're currently not handling at all, which
>>>> would therefore depend on how the bootloader sets this up.
>>>
>>> please, provide a link to the log displaying the issue and the contact
>>> who can provide the exact setup.
>>>
>>> I have been testing with U-Boot as boot loader.
>>
>> failing boot can be found on
>> https://kernelci.org/boot/id/5b2a053d59b514569079a872/
>>
>> As this board is sitting in the "lab-baylibre-seattle", I guess
>> Kevin Hilman (Cc'ed now) is the one that can say a bit more about the
>> board setup.
>>
>>
>> The more interesting question would be how to make sure we don't
>> die with possible different bootloader versions. As I don't really thing 
>> "upgrade your bootloader" is an always valid option.
>>
>>
>> Heiko
>>
> 
> Hi Kevin,
> 
> the RK3399-Firefly was booted on lab-baylibre-seattle with
> U-Boot 2017.05-rc3-00131-gf79fd58d5f5c-dirty
> 
> f79fd58d5f5c is not a commit in U-Boot master.
> The version number tells us it is 131 patches ahead of U-Boot 2017.05-rc3.
> Dirty means the source contained uncommitted changes.
> 
> Unfortunately this is not a reproducible test environment.
> Could you, please, provide the build recipe to reproduce the U-Boot
> BayLibre is using?
> Would it be possible to use mainline U-Boot in kernelci for this board?
> 
> Best regards
> 
> Heinrich
> 

I have now built the last available release of U-Boot (v2018.05)
according to the following recipe:

git clone https://github.com/xypron/u-boot-build.git
cd u-boot-build/
git checkout firefly-rk3399-rkloader
# commit 251b12fb4f0eabfff2d0552d0807d8ddc44ae2aa
# tag firefly-rk3399-rkloader-v2018.05
make
make install DESTDIR=foo
cd foo/usr/lib/u-boot/firefly-rk3399/
# be careful to specify your SD card as device!
./sd_fusing /dev/sdX

# in U-Boot 2018.05 (Jun 21 2018 - 02:33:12 +0200)
load mmc 1:1 ${fdt_addr_r} 2018-06-20/rk3399-firefly.dtb
load mmc 1:1 ${kernel_addr_r} 2018-06-20/Image
booti ${kernel_addr_r} - ${fdt_addr_r}

The error observed in kernelci when initializing the FAN53555 driver
does not occur.

The console log is here:
https://gist.github.com/xypron/34b6485deabfc8172f978b5a99705466

Best regards

Heinrich