Re: [PATCH v5 6/6] mtd: rawnand: micron: detect forced on-die ECC

[Boris Brezillon]

On Fri, 22 Jun 2018 13:28:35 +1200
Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> wrote:

> Some Micron NAND chips have on-die ECC forceably enabled. The detect

							    ^ Detect ?

> these based on chip ID as there seems to be no other way of
> distinguishing these chips from those that have optional support for
> on-die ECC.
> 
> When a chip with mandatory on-die ECC is detected change the current ECC
> mode to on-die.

That part is no longer true.

> 
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>

With the commit message fixed:

Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>

> ---
> 
> Notes:
>     Changes in v4:
>     - New
>     Changes in v5:
>     - fail if on-die ECC is mandatory and the current ecc.mode is not
>       NAND_ECC_ON_DIE.
> 
>  drivers/mtd/nand/raw/nand_micron.c | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
> index f83053562925..35fa6880a799 100644
> --- a/drivers/mtd/nand/raw/nand_micron.c
> +++ b/drivers/mtd/nand/raw/nand_micron.c
> @@ -255,6 +255,14 @@ enum {
>  	MICRON_ON_DIE_MANDATORY,
>  };
>  
> +/*
> + * These parts are known to have on-die ECC forceably enabled
> + */
> +static u8 micron_on_die_ecc[] = {
> +	0xd1, /* MT29F1G08ABAFA */
> +	0xa1, /* MT29F1G08ABBFA */
> +};
> +
>  /*
>   * Try to detect if the NAND support on-die ECC. To do this, we enable
>   * the feature, and read back if it has been enabled as expected. We
> @@ -269,6 +277,11 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
>  {
>  	u8 feature[ONFI_SUBFEATURE_PARAM_LEN] = { 0, };
>  	int ret;
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(micron_on_die_ecc); i++)
> +		if (chip->id.data[1] == micron_on_die_ecc[i])
> +			return MICRON_ON_DIE_MANDATORY;
>  
>  	if (!chip->parameters.onfi.version)
>  		return MICRON_ON_DIE_UNSUPPORTED;
> @@ -322,7 +335,8 @@ static int micron_nand_init(struct nand_chip *chip)
>  
>  	ondie = micron_supports_on_die_ecc(chip);
>  
> -	if (ondie == MICRON_ON_DIE_MANDATORY) {
> +	if (ondie == MICRON_ON_DIE_MANDATORY &&
> +	    chip->ecc.mode != NAND_ECC_ON_DIE) {
>  		pr_err("On-die ECC forcefully enabled, not supported\n");
>  		return -EINVAL;
>  	}