Re: [PATCH 2/3] pinctrl: msm: Mux out gpio function with gpio_request()

[Bjorn Andersson]

On Mon 18 Jun 13:52 PDT 2018, Stephen Boyd wrote:

> We rely on devices to use pinmuxing configurations in DT to select the
> GPIO function (function 0) if they're going to use the gpio in GPIO
> mode. Let's simplify things for driver authors by implementing
> gpio_request_enable() for this pinctrl driver to mux out the GPIO
> function when the gpio is use from gpiolib.
> 
> Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> Cc: Doug Anderson <dianders@xxxxxxxxxxxx>
> Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> ---
>  drivers/pinctrl/qcom/pinctrl-msm.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
> index 3563c4394837..eacfc5b85f7f 100644
> --- a/drivers/pinctrl/qcom/pinctrl-msm.c
> +++ b/drivers/pinctrl/qcom/pinctrl-msm.c
> @@ -176,11 +176,27 @@ static int msm_pinmux_set_mux(struct pinctrl_dev *pctldev,
>  	return 0;
>  }
>  
> +static int msm_pinmux_request_gpio(struct pinctrl_dev *pctldev,
> +				   struct pinctrl_gpio_range *range,
> +				   unsigned offset)
> +{
> +	struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> +	const struct msm_pingroup *g = &pctrl->soc->groups[offset];
> +
> +	/* No funcs? Probably ACPI so can't do anything here */
> +	if (!g->nfuncs)
> +		return 0;
> +
> +	/* For now assume function 0 is GPIO because it always is */
> +	return msm_pinmux_set_mux(pctldev, 0, offset);
> +}
> +
>  static const struct pinmux_ops msm_pinmux_ops = {
>  	.request		= msm_pinmux_request,
>  	.get_functions_count	= msm_get_functions_count,
>  	.get_function_name	= msm_get_function_name,
>  	.get_function_groups	= msm_get_function_groups,
> +	.gpio_request_enable	= msm_pinmux_request_gpio,
>  	.set_mux		= msm_pinmux_set_mux,
>  };
>  
> -- 
> Sent by a computer through tubes
>