[PATCH 1/8] remoteproc: add map parameter to da_to_va

From: David Lechner
Date: Sat Jun 23 2018 - 17:10:46 EST

Next message: David Lechner: "[PATCH 4/8] dt-bindings: add bindings for TI PRU as remoteproc"
Previous message: David Lechner: "[PATCH 5/8] remoteproc: new driver for TI PRU"
In reply to: David Lechner: "[PATCH 5/8] remoteproc: new driver for TI PRU"
Next in thread: David Lechner: "[PATCH 4/8] dt-bindings: add bindings for TI PRU as remoteproc"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This adds a new map parameter to the da_to_va callback for remoteproc
devices. This parameter will be used by devices that have more than
one memory map, such as the PRU found in TI Sitara SoCs.

On these devices, the same physical memory address can refer to two
different locations, i.e. instruction memory or data memory both start
at 0x0. So, an extra bit of information is needed in the da_to_va
callback to tell these apart.

Devices that only have a single memory map will just pass 0 for this
parameter. For now we are using 0 everywhere, but later patches will
modify this value.

Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
---
drivers/remoteproc/imx_rproc.c | 2 +-
drivers/remoteproc/keystone_remoteproc.c | 3 ++-
drivers/remoteproc/qcom_adsp_pil.c | 2 +-
drivers/remoteproc/qcom_q6v5_pil.c | 2 +-
drivers/remoteproc/qcom_wcnss.c | 2 +-
drivers/remoteproc/remoteproc_core.c | 10 ++++++----
drivers/remoteproc/remoteproc_elf_loader.c | 4 ++--
drivers/remoteproc/remoteproc_internal.h | 2 +-
drivers/remoteproc/st_slim_rproc.c | 2 +-
drivers/remoteproc/wkup_m3_rproc.c | 3 ++-
include/linux/remoteproc.h | 2 +-
11 files changed, 19 insertions(+), 15 deletions(-)

diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index 54c07fd3f204..78c3502fea36 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -211,7 +211,7 @@ static int imx_rproc_da_to_sys(struct imx_rproc *priv, u64 da,
return -ENOENT;
}

-static void *imx_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
+static void *imx_rproc_da_to_va(struct rproc *rproc, u64 da, int len, int map)
{
struct imx_rproc *priv = rproc->priv;
void *va = NULL;
diff --git a/drivers/remoteproc/keystone_remoteproc.c b/drivers/remoteproc/keystone_remoteproc.c
index aaac31134e39..0f87cf95ae4f 100644
--- a/drivers/remoteproc/keystone_remoteproc.c
+++ b/drivers/remoteproc/keystone_remoteproc.c
@@ -254,7 +254,8 @@ static void keystone_rproc_kick(struct rproc *rproc, int vqid)
* can be used either by the remoteproc core for loading (when using kernel
* remoteproc loader), or by any rpmsg bus drivers.
*/
-static void *keystone_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
+static void *keystone_rproc_da_to_va(struct rproc *rproc, u64 da, int len,
+ int map)
{
struct keystone_rproc *ksproc = rproc->priv;
void __iomem *va = NULL;
diff --git a/drivers/remoteproc/qcom_adsp_pil.c b/drivers/remoteproc/qcom_adsp_pil.c
index 89a86ce07f99..25a174a06985 100644
--- a/drivers/remoteproc/qcom_adsp_pil.c
+++ b/drivers/remoteproc/qcom_adsp_pil.c
@@ -167,7 +167,7 @@ static int adsp_stop(struct rproc *rproc)
return ret;
}

-static void *adsp_da_to_va(struct rproc *rproc, u64 da, int len)
+static void *adsp_da_to_va(struct rproc *rproc, u64 da, int len, int map)
{
struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
int offset;
diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
index 2bf8e7c49f2a..58ba7349b311 100644
--- a/drivers/remoteproc/qcom_q6v5_pil.c
+++ b/drivers/remoteproc/qcom_q6v5_pil.c
@@ -995,7 +995,7 @@ static int q6v5_stop(struct rproc *rproc)
return 0;
}

-static void *q6v5_da_to_va(struct rproc *rproc, u64 da, int len)
+static void *q6v5_da_to_va(struct rproc *rproc, u64 da, int len, int map)
{
struct q6v5 *qproc = rproc->priv;
int offset;
diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index b0e07e9f42d5..92b05fb10557 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -295,7 +295,7 @@ static int wcnss_stop(struct rproc *rproc)
return ret;
}

-static void *wcnss_da_to_va(struct rproc *rproc, u64 da, int len)
+static void *wcnss_da_to_va(struct rproc *rproc, u64 da, int len, int map)
{
struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
int offset;
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index a9609d971f7f..fb9ae85a0bee 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -145,6 +145,8 @@ static void rproc_disable_iommu(struct rproc *rproc)
* @rproc: handle of a remote processor
* @da: remoteproc device address to translate
* @len: length of the memory region @da is pointing to
+ * @map: indicates which memory map to use for devices with more than one
+ * memory map or 0 for devices that only have a single memory map
*
* Some remote processors will ask us to allocate them physically contiguous
* memory regions (which we call "carveouts"), and map them to specific
@@ -169,13 +171,13 @@ static void rproc_disable_iommu(struct rproc *rproc)
* here the output of the DMA API for the carveouts, which should be more
* correct.
*/
-void *rproc_da_to_va(struct rproc *rproc, u64 da, int len)
+void *rproc_da_to_va(struct rproc *rproc, u64 da, int len, int map)
{
struct rproc_mem_entry *carveout;
void *ptr = NULL;

if (rproc->ops->da_to_va) {
- ptr = rproc->ops->da_to_va(rproc, da, len);
+ ptr = rproc->ops->da_to_va(rproc, da, len, map);
if (ptr)
goto out;
}
@@ -468,7 +470,7 @@ static int rproc_handle_trace(struct rproc *rproc, struct fw_rsc_trace *rsc,
}

/* what's the kernel address of this resource ? */
- ptr = rproc_da_to_va(rproc, rsc->da, rsc->len);
+ ptr = rproc_da_to_va(rproc, rsc->da, rsc->len, 0);
if (!ptr) {
dev_err(dev, "erroneous trace resource entry\n");
return -EINVAL;
@@ -1124,7 +1126,7 @@ static void rproc_coredump(struct rproc *rproc)
phdr->p_flags = PF_R | PF_W | PF_X;
phdr->p_align = 0;

- ptr = rproc_da_to_va(rproc, segment->da, segment->size);
+ ptr = rproc_da_to_va(rproc, segment->da, segment->size, 0);
if (!ptr) {
dev_err(&rproc->dev,
"invalid coredump segment (%pad, %zu)\n",
diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
index b17d72ec8603..8888d39e1b13 100644
--- a/drivers/remoteproc/remoteproc_elf_loader.c
+++ b/drivers/remoteproc/remoteproc_elf_loader.c
@@ -182,7 +182,7 @@ int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
}

/* grab the kernel address for this device address */
- ptr = rproc_da_to_va(rproc, da, memsz);
+ ptr = rproc_da_to_va(rproc, da, memsz, 0);
if (!ptr) {
dev_err(dev, "bad phdr da 0x%x mem 0x%x\n", da, memsz);
ret = -EINVAL;
@@ -333,6 +333,6 @@ struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,
if (!shdr)
return NULL;

- return rproc_da_to_va(rproc, shdr->sh_addr, shdr->sh_size);
+ return rproc_da_to_va(rproc, shdr->sh_addr, shdr->sh_size, 0);
}
EXPORT_SYMBOL(rproc_elf_find_loaded_rsc_table);
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index 7570beb035b5..92968a341f86 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -51,7 +51,7 @@ void rproc_exit_sysfs(void);
void rproc_free_vring(struct rproc_vring *rvring);
int rproc_alloc_vring(struct rproc_vdev *rvdev, int i);

-void *rproc_da_to_va(struct rproc *rproc, u64 da, int len);
+void *rproc_da_to_va(struct rproc *rproc, u64 da, int len, int map);
int rproc_trigger_recovery(struct rproc *rproc);

int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw);
diff --git a/drivers/remoteproc/st_slim_rproc.c b/drivers/remoteproc/st_slim_rproc.c
index 1ffb1f0c43d6..146badc9f061 100644
--- a/drivers/remoteproc/st_slim_rproc.c
+++ b/drivers/remoteproc/st_slim_rproc.c
@@ -178,7 +178,7 @@ static int slim_rproc_stop(struct rproc *rproc)
return 0;
}

-static void *slim_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
+static void *slim_rproc_da_to_va(struct rproc *rproc, u64 da, int len, int map)
{
struct st_slim_rproc *slim_rproc = rproc->priv;
void *va = NULL;
diff --git a/drivers/remoteproc/wkup_m3_rproc.c b/drivers/remoteproc/wkup_m3_rproc.c
index 1ada0e51fef6..12cb26ebf35b 100644
--- a/drivers/remoteproc/wkup_m3_rproc.c
+++ b/drivers/remoteproc/wkup_m3_rproc.c
@@ -88,7 +88,8 @@ static int wkup_m3_rproc_stop(struct rproc *rproc)
return 0;
}

-static void *wkup_m3_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
+static void *wkup_m3_rproc_da_to_va(struct rproc *rproc, u64 da, int len,
+ int map)
{
struct wkup_m3_rproc *wkupm3 = rproc->priv;
void *va = NULL;
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index dfdaede9139e..2d88e394fc99 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -343,7 +343,7 @@ struct rproc_ops {
int (*start)(struct rproc *rproc);
int (*stop)(struct rproc *rproc);
void (*kick)(struct rproc *rproc, int vqid);
- void * (*da_to_va)(struct rproc *rproc, u64 da, int len);
+ void * (*da_to_va)(struct rproc *rproc, u64 da, int len, int map);
int (*parse_fw)(struct rproc *rproc, const struct firmware *fw);
struct resource_table *(*find_loaded_rsc_table)(
struct rproc *rproc, const struct firmware *fw);
--
2.17.1

Next message: David Lechner: "[PATCH 4/8] dt-bindings: add bindings for TI PRU as remoteproc"
Previous message: David Lechner: "[PATCH 5/8] remoteproc: new driver for TI PRU"
In reply to: David Lechner: "[PATCH 5/8] remoteproc: new driver for TI PRU"
Next in thread: David Lechner: "[PATCH 4/8] dt-bindings: add bindings for TI PRU as remoteproc"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]