Re: [PATCH v3 7/7] soc: qcom: rpmpd/rpmhpd: Add a max vote on all corners at init

[Rajendra Nayak]

On 06/25/2018 02:27 PM, Ulf Hansson wrote:
> On 19 June 2018 at 12:10, Viresh Kumar <viresh.kumar@xxxxxxxxxx> wrote:
>> On 14-06-18, 12:05, Rajendra Nayak wrote:
>>> On 06/14/2018 03:58 AM, David Collins wrote:
>>>> Hello Rajendra,
>>>>
>>>> On 06/11/2018 09:40 PM, Rajendra Nayak wrote:
>>>>> As we move from no clients/consumers in kernel voting on corners,
>>>>> to *some* voting and some not voting, we might end up in a situation
>>>>> where the clients which remove votes can adversly impact others
>>>>
>>>> s/adversly/adversely/
>>>>
>>>>> who still don't have a way to vote.
>>>>>
>>>>> To avoid this situation, have a max vote on all corners at init.
>>>>> This should/can be removed once we have all clients moved to
>>>>> be able to vote/unvote for themselves.
>>>>
>>>> This change seems like a hack.  Do you intend for it to be merged and then
>>>> later reverted in Linus's tree?  Could it instead be implemented in a way
>>>> that does not require reverting and instead is enabled by some DT
>>>> property?  Alternatively, could this feature be added to the power domain
>>>> core since it is relatively generic?
>>>>
>>>>
>>>>> Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
>>>>> Acked-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
>>>>> ---
>>>>>  drivers/soc/qcom/rpmhpd.c | 12 +++++++++++-
>>>>>  drivers/soc/qcom/rpmpd.c  |  9 +++++++++
>>>>>  2 files changed, 20 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
>>>>> index 7083ec1590ff..3c753d33aeee 100644
>>>>> --- a/drivers/soc/qcom/rpmhpd.c
>>>>> +++ b/drivers/soc/qcom/rpmhpd.c
>>>>> @@ -329,7 +329,7 @@ static int rpmhpd_update_level_mapping(struct rpmhpd *rpmhpd)
>>>>>
>>>>>  static int rpmhpd_probe(struct platform_device *pdev)
>>>>>  {
>>>>> -  int i, ret;
>>>>> +  int i, ret, max_level;
>>>>>    size_t num;
>>>>>    struct genpd_onecell_data *data;
>>>>>    struct rpmhpd **rpmhpds;
>>>>> @@ -390,6 +390,16 @@ static int rpmhpd_probe(struct platform_device *pdev)
>>>>>            pm_genpd_init(&rpmhpds[i]->pd, NULL, true);
>>>>>
>>>>>            data->domains[i] = &rpmhpds[i]->pd;
>>>>> +
>>>>> +          /*
>>>>> +           * Until we have all consumers voting on corners
>>>>> +           * just vote the max corner on all PDs
>>>>> +           * This should ideally be *removed* once we have
>>>>> +           * all (most) consumers being able to vote
>>>>> +           */
>>>>> +          max_level = rpmhpds[i]->level_count - 1;
>>>>> +          rpmhpd_set_performance(&rpmhpds[i]->pd, rpmhpds[i]->level[max_level]);
>>>>> +          rpmhpd_power_on(&rpmhpds[i]->pd);
>>>>
>>>> Clearly these calls will result in max level requests being sent for all
>>>> power domains at probe time.  However, it isn't clear that this will
>>>> actually help at runtime in these two cases:
>>>>
>>>> 1. A consumer enables and then disables a power domain.
>>>>     - It seems like the PD would just be disabled in this case.
>>
>> So instead of rpmhpd_power_on() we should be doing gepnd_power_on() or whatever
>> the API is, so the user count stays at 1.
> 
> There is no such API.
> 
> Instead a device needs to be attached to genpd and that's it. As long
> as the device don't enables runtime PM and that the device gets
> runtime suspended, genpd will remain powered on.

Its more to do with keeping the power domains at a desired 'performance level'
than just keeping them on.

> 
>>
>>>> 2. A consumer sets a non-max performance state of a power domain.
>>>>     - It seems like the PD would just be set to the new lower
>>>>       performance state since the max vote isn't known to the
>>>>       PD core for aggregation purposes.
>>
>> Right, and that's because the patch isn't implemented properly yet. I asked to
>> do a fake vote from some user with their dev structure, so the vote always
>> stays.
>>
>>> Yes, you are right. I certainly did not seem to have thought through this enough.
>>>
>>> A need for something like this came up at a point where genpd could not deal with
>>> devices with multiple power domains. So the concern at that point was that if some
>>> consumers (which only need to vote on one corner) move to using this driver, while
>>> some others (which need to vote on multiple corners) cannot, we would end up breaking
>>> them.
>>>
>>> That does not seem to be true anymore since we do have patches from Ulf which support
>>> having devices with multiple power domains attached which can be controlled individually.
>>> So if some consumer voting makes some others break, they should just be fixed and patched
>>> to vote as well. If all this gets handled centrally from within the clock drivers then we
>>> most likely won't even end up with a situation like this.
>>>
>>> I think I will just drop this one unless Stephen/Viresh still see an issue with some early
>>> voters breaking others.
>>
>> So what if the LCD/DDR/etc are getting used at boot and someone requests a lower
>> vote?  Wouldn't we just break ?
> 
> Sounds like we need a way to manage votes for "boot constraints
> performance levels". :-)

Yes, I think we are mixing up whats needed for 'boot constraints' and what this
patch was meant to do.
Boot constraints is a generic problem not limited to power domains alone and this patch
isn't trying to solve that.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation