Re: [intel-sgx-kernel-dev] [PATCH v11 13/13] intel_sgx: in-kernel launch enclave

[Nathaniel McCallum]

On Thu, Jun 21, 2018 at 5:21 PM Sean Christopherson
<sean.j.christopherson@xxxxxxxxx> wrote:
>
> On Thu, Jun 21, 2018 at 03:11:18PM -0400, Nathaniel McCallum wrote:
> > If this is acceptable for everyone, my hope is the following:
> >
> > 1. Intel would split the existing code into one of the following
> > schemas (I don't care which):
> >   A. three parts: UEFI module, FLC-only kernel driver and user-space
> > launch enclave
> >   B. two parts: UEFI module (including launch enclave) and FLC-only
> > kernel driver
>
> To make sure I understand correctly...
>
> The UEFI module would lock the LE MSRs with a public key hardcoded
> into both the UEFI module and the kernel at build time?
>
> And for the kernel, it would only load its SGX driver if FLC is
> supported and the MSRs are locked to the expected key?
>
> IIUC, this approach will cause problems for virtualization.  Running
> VMs with different LE keys would require the bare metal firmware to
> configure the LE MSRs to be unlocked, which would effectively make
> using SGX in the host OS mutually exlusive with exposing SGX to KVM
> guests.  Theoretically it would be possible for KVM to emulate the
> guest's LE and use the host's LE to generate EINIT tokens, but
> emulating an enclave would likely require a massive amount of code
> and/or complexity.

How is this different from any other scenario where you lock the LE
MSRs? Unless Intel provides hardware support between the LE MSRs and
the VMX instructions, I don't see any way around this besides letting
any launch enclave run.

> > 2. Intel would release a reproducible build of the GPL UEFI module
> > sources signed with a SecureBoot trusted key and provide an
> > acceptable[0] binary redistribution license.
> >
> > 3. The kernel community would agree to merge the kernel driver given
> > the above criteria (and, obviously, acceptable kernel code).
> >
> > The question of how to distribute the UEFI module and possible launch
> > enclave remains open. I see two options: independent distribution and
> > bundling it in linux-firmware. The former may be a better
> > technological fit since the UEFI module will likely need to be run
> > before the kernel (and the boot loader; and shim). However, the latter
> > has the benefit of already being a well-known entity to our downstream
> > distributors. I could go either way on this.
>
> Writing and locks the LE MSRs effectively needs to be done before
> running the bootloader/kernel/etc...  Delaying activation would
> require, at a minimum, leaving IA32_FEATURE_CONTROL unlocked since
> IA32_FEATURE_CONTROL's SGX bits can't be set until SGX is activated.
>
> > I know this plan is more work for everyone involved, but I think it
> > manages to actually maximize both security and freedom.
> >
> > [0]: details here -
> > https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/README#n19
> > On Thu, Jun 21, 2018 at 11:29 AM Neil Horman <nhorman@xxxxxxxxxx> wrote:
> > >
> > > On Thu, Jun 21, 2018 at 08:32:25AM -0400, Nathaniel McCallum wrote:
> > > > On Wed, Jun 20, 2018 at 5:02 PM Sean Christopherson
> > > > <sean.j.christopherson@xxxxxxxxx> wrote:
> > > > >
> > > > > On Wed, Jun 20, 2018 at 11:39:00AM -0700, Jethro Beekman wrote:
> > > > > > On 2018-06-20 11:16, Jethro Beekman wrote:
> > > > > > > > This last bit is also repeated in different words in Table 35-2 and
> > > > > > > > Section 42.2.2. The MSRs are *not writable* before the write-lock bit
> > > > > > > > itself is locked. Meaning the MSRs are either locked with Intel's key
> > > > > > > > hash, or not locked at all.
> > > > > >
> > > > > > Actually, this might be a documentation bug. I have some test hardware and I
> > > > > > was able to configure the MSRs in the BIOS and then read the MSRs after boot
> > > > > > like this:
> > > > > >
> > > > > > MSR 0x3a 0x0000000000040005
> > > > > > MSR 0x8c 0x20180620aaaaaaaa
> > > > > > MSR 0x8d 0x20180620bbbbbbbb
> > > > > > MSR 0x8e 0x20180620cccccccc
> > > > > > MSR 0x8f 0x20180620dddddddd
> > > > > >
> > > > > > Since this is not production hardware, it could also be a CPU bug of course.
> > > > > >
> > > > > > If it is indeed possible to configure AND lock the MSR values to non-Intel
> > > > > > values, I'm very much in favor of Nathaniels proposal to treat the launch
> > > > > > enclave like any other firmware blob.
> > > > >
> > > > > It's not a CPU or documentation bug (though the latter is arguable).
> > > > > SGX has an activation step that is triggered by doing a WRMSR(0x7a)
> > > > > with bit 0 set.  Until SGX is activated, the SGX related bits in
> > > > > IA32_FEATURE_CONTROL cannot be set, i.e. SGX can't be enabled.  But,
> > > > > the LE hash MSRs are fully writable prior to activation, e.g. to
> > > > > allow firmware to lock down the LE key with a non-Intel value.
> > > > >
> > > > > So yes, it's possible to lock the MSRs to a non-Intel value.  The
> > > > > obvious caveat is that whatever blob is used to write the MSRs would
> > > > > need be executed prior to activation.
> > > >
> > > > This implies that it should be possible to create MSR activation (and
> > > > an embedded launch enclave?) entirely as a UEFI module. The kernel
> > > > would still get to manage who has access to /dev/sgx and other
> > > > important non-cryptographic policy details. Users would still be able
> > > > to control the cryptographic policy details (via BIOS Secure Boot
> > > > configuration that exists today). Distributions could still control
> > > > cryptographic policy details via signing of the UEFI module with their
> > > > own Secure Boot key (or using something like shim). The UEFI module
> > > > (and possibly the external launch enclave) could be distributed via
> > > > linux-firmware.
> > > >
> > > > Andy/Neil, does this work for you?
> > > >
> > > I need some time to digest it.  Who in your mind is writing the UEFI module.  Is
> > > that the firmware vendor or IHV?
> > >
> > > Neil
> > >
> > > > > As for the SDM, it's a documentation... omission?  SGX activation
> > > > > is intentionally omitted from the SDM.  The intended usage model is
> > > > > that firmware will always do the activation (if it wants SGX enabled),
> > > > > i.e. post-firmware software will only ever "see" SGX as disabled or
> > > > > in the fully activated state, and so the SDM doesn't describe SGX
> > > > > behavior prior to activation.  I believe the activation process, or
> > > > > at least what is required from firmware, is documented in the BIOS
> > > > > writer's guide.
> > > > >
> > > > > > Jethro Beekman | Fortanix
> > > > > >
> > > > >
> > > > >