[PATCH v3 net-next] mdio-mux-gpio: Remove VLA usage
From: Kees Cook
Date: Mon Jun 25 2018 - 18:09:33 EST
In the quest to remove all stack VLA usage from the kernel[1], this
allocates the values buffer during the callback instead of putting it
on the stack.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@xxxxxxxxxxxxxx
Signed-off-by: Kees Cook <keescook@xxxxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
---
v2: allocate array as part of structure (Andrew Lunn)
v3: resend to netdev with Reviewed-by
---
drivers/net/phy/mdio-mux-gpio.c | 22 ++++++++++++++--------
1 file changed, 14 insertions(+), 8 deletions(-)
diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c
index 082ffef0dec4..6b55e0ddef63 100644
--- a/drivers/net/phy/mdio-mux-gpio.c
+++ b/drivers/net/phy/mdio-mux-gpio.c
@@ -20,23 +20,23 @@
struct mdio_mux_gpio_state {
struct gpio_descs *gpios;
void *mux_handle;
+ int values[];
};
static int mdio_mux_gpio_switch_fn(int current_child, int desired_child,
void *data)
{
struct mdio_mux_gpio_state *s = data;
- int values[s->gpios->ndescs];
unsigned int n;
if (current_child == desired_child)
return 0;
for (n = 0; n < s->gpios->ndescs; n++)
- values[n] = (desired_child >> n) & 1;
+ s->values[n] = (desired_child >> n) & 1;
gpiod_set_array_value_cansleep(s->gpios->ndescs, s->gpios->desc,
- values);
+ s->values);
return 0;
}
@@ -44,15 +44,21 @@ static int mdio_mux_gpio_switch_fn(int current_child, int desired_child,
static int mdio_mux_gpio_probe(struct platform_device *pdev)
{
struct mdio_mux_gpio_state *s;
+ struct gpio_descs *gpios;
int r;
- s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
- if (!s)
+ gpios = gpiod_get_array(&pdev->dev, NULL, GPIOD_OUT_LOW);
+ if (IS_ERR(gpios))
+ return PTR_ERR(gpios);
+
+ s = devm_kzalloc(&pdev->dev, sizeof(*s->values) * gpios->ndescs +
+ sizeof(*s), GFP_KERNEL);
+ if (!s) {
+ gpiod_put_array(gpios);
return -ENOMEM;
+ }
- s->gpios = gpiod_get_array(&pdev->dev, NULL, GPIOD_OUT_LOW);
- if (IS_ERR(s->gpios))
- return PTR_ERR(s->gpios);
+ s->gpios = gpios;
r = mdio_mux_init(&pdev->dev, pdev->dev.of_node,
mdio_mux_gpio_switch_fn, &s->mux_handle, s, NULL);
--
2.17.1
--
Kees Cook
Pixel Security