[PATCH tip/core/rcu 1/5] torture: Use a single build directory for torture scenarios

From: Paul E. McKenney
Date: Mon Jun 25 2018 - 18:56:05 EST


The torture scripting currently builds each kernel from a set of parallel
runs in its own build directory. This can waste quite a bit of space when
running large numbers of concurrent scenarios, and pointlessly given that
the builds are run sequentially (albeit with a largish -j number passed to
"make"). This commit therefore places all build-command output in the
results directory, then does all builds in a single "b1" build directory.

Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>
---
.../selftests/rcutorture/bin/configinit.sh | 26 +++++++++----------
.../selftests/rcutorture/bin/kvm-build.sh | 11 ++++----
.../rcutorture/bin/kvm-test-1-run.sh | 5 ++--
tools/testing/selftests/rcutorture/bin/kvm.sh | 2 +-
4 files changed, 22 insertions(+), 22 deletions(-)

diff --git a/tools/testing/selftests/rcutorture/bin/configinit.sh b/tools/testing/selftests/rcutorture/bin/configinit.sh
index c15f270e121d..65541c21a544 100755
--- a/tools/testing/selftests/rcutorture/bin/configinit.sh
+++ b/tools/testing/selftests/rcutorture/bin/configinit.sh
@@ -1,6 +1,6 @@
#!/bin/bash
#
-# Usage: configinit.sh config-spec-file [ build output dir ]
+# Usage: configinit.sh config-spec-file build-output-dir results-dir
#
# Create a .config file from the spec file. Run from the kernel source tree.
# Exits with 0 if all went well, with 1 if all went well but the config
@@ -40,20 +40,18 @@ mkdir $T

c=$1
buildloc=$2
+resdir=$3
builddir=
-if test -n $buildloc
+if echo $buildloc | grep -q '^O='
then
- if echo $buildloc | grep -q '^O='
+ builddir=`echo $buildloc | sed -e 's/^O=//'`
+ if test ! -d $builddir
then
- builddir=`echo $buildloc | sed -e 's/^O=//'`
- if test ! -d $builddir
- then
- mkdir $builddir
- fi
- else
- echo Bad build directory: \"$buildloc\"
- exit 2
+ mkdir $builddir
fi
+else
+ echo Bad build directory: \"$buildloc\"
+ exit 2
fi

sed -e 's/^\(CONFIG[0-9A-Z_]*\)=.*$/grep -v "^# \1" |/' < $c > $T/u.sh
@@ -61,12 +59,12 @@ sed -e 's/^\(CONFIG[0-9A-Z_]*=\).*$/grep -v \1 |/' < $c >> $T/u.sh
grep '^grep' < $T/u.sh > $T/upd.sh
echo "cat - $c" >> $T/upd.sh
make mrproper
-make $buildloc distclean > $builddir/Make.distclean 2>&1
-make $buildloc $TORTURE_DEFCONFIG > $builddir/Make.defconfig.out 2>&1
+make $buildloc distclean > $resdir/Make.distclean 2>&1
+make $buildloc $TORTURE_DEFCONFIG > $resdir/Make.defconfig.out 2>&1
mv $builddir/.config $builddir/.config.sav
sh $T/upd.sh < $builddir/.config.sav > $builddir/.config
cp $builddir/.config $builddir/.config.new
-yes '' | make $buildloc oldconfig > $builddir/Make.oldconfig.out 2> $builddir/Make.oldconfig.err
+yes '' | make $buildloc oldconfig > $resdir/Make.oldconfig.out 2> $resdir/Make.oldconfig.err

# verify new config matches specification.
configcheck.sh $builddir/.config $c
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-build.sh b/tools/testing/selftests/rcutorture/bin/kvm-build.sh
index 34d126734cde..9115fcdb5617 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-build.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-build.sh
@@ -2,7 +2,7 @@
#
# Build a kvm-ready Linux kernel from the tree in the current directory.
#
-# Usage: kvm-build.sh config-template build-dir
+# Usage: kvm-build.sh config-template build-dir resdir
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -29,6 +29,7 @@ then
exit 1
fi
builddir=${2}
+resdir=${3}

T=${TMPDIR-/tmp}/test-linux.sh.$$
trap 'rm -rf $T' 0
@@ -41,19 +42,19 @@ CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_CONSOLE=y
___EOF___

-configinit.sh $T/config O=$builddir
+configinit.sh $T/config O=$builddir $resdir
retval=$?
if test $retval -gt 1
then
exit 2
fi
ncpus=`cpus2use.sh`
-make O=$builddir -j$ncpus $TORTURE_KMAKE_ARG > $builddir/Make.out 2>&1
+make O=$builddir -j$ncpus $TORTURE_KMAKE_ARG > $resdir/Make.out 2>&1
retval=$?
-if test $retval -ne 0 || grep "rcu[^/]*": < $builddir/Make.out | egrep -q "Stop|Error|error:|warning:" || egrep -q "Stop|Error|error:" < $builddir/Make.out
+if test $retval -ne 0 || grep "rcu[^/]*": < $resdir/Make.out | egrep -q "Stop|Error|error:|warning:" || egrep -q "Stop|Error|error:" < $resdir/Make.out
then
echo Kernel build error
- egrep "Stop|Error|error:|warning:" < $builddir/Make.out
+ egrep "Stop|Error|error:|warning:" < $resdir/Make.out
echo Run aborted.
exit 3
fi
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
index c5b0f94341d9..f7247ee00514 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
@@ -98,14 +98,15 @@ then
ln -s $base_resdir/.config $resdir # for kvm-recheck.sh
# Arch-independent indicator
touch $resdir/builtkernel
-elif kvm-build.sh $T/Kc2 $builddir
+elif kvm-build.sh $T/Kc2 $builddir $resdir
then
# Had to build a kernel for this test.
QEMU="`identify_qemu $builddir/vmlinux`"
BOOT_IMAGE="`identify_boot_image $QEMU`"
- cp $builddir/Make*.out $resdir
cp $builddir/vmlinux $resdir
cp $builddir/.config $resdir
+ cp $builddir/Module.symvers $resdir > /dev/null || :
+ cp $builddir/System.map $resdir > /dev/null || :
if test -n "$BOOT_IMAGE"
then
cp $builddir/$BOOT_IMAGE $resdir
diff --git a/tools/testing/selftests/rcutorture/bin/kvm.sh b/tools/testing/selftests/rcutorture/bin/kvm.sh
index 56610dbbdf73..5a7a62d76a50 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm.sh
@@ -347,7 +347,7 @@ function dump(first, pastlast, batchnum)
print "needqemurun="
jn=1
for (j = first; j < pastlast; j++) {
- builddir=KVM "/b" jn
+ builddir=KVM "/b1"
cpusr[jn] = cpus[j];
if (cfrep[cf[j]] == "") {
cfr[jn] = cf[j];
--
2.17.1