Re: [PATCH v3] ARM: dts: BCM5301X: Add support for Linksys EA9500

[Florian Fainelli]

On 06/18/2018 10:41 AM, Vivek Unune wrote:
> Hardware Info
> -------------
> 
> Processor	- Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz
> Switch		- BCM53012 in BCM4709C0KFEBG & external BCM53125
> DDR3 RAM	- 256 MB
> Flash		- 128 MB (Toshiba TC58BVG0S3HTA00)
> 2.4GHz		- BCM4366 4Ã4 2.4/5G single chip 802.11ac SoC
> Power Amp	- Skyworks SE2623L 2.4 GHz power amp (x4)
> 5GHz x 2	- BCM4366 4Ã4 2.4/5G single chip 802.11ac SoC
> Power Amp	- PLX Technology PEX8603 3-lane, 3-port PCIe switch
> Ports		- 8 Ports, 1 WAN Ports
> Antennas	- 8 Antennas
> Serial Port	- @J6 [GND,TX,RX] (VCC NC)    115200 8n1
> 
> Tested with OpenWrt built with DSA driver and Kernel v4.14
> 
> Signed-off-by: Vivek Unune <npcomplete13@xxxxxxxxx>

Applied to devicetree/next, thanks Vivek.
-- 
Florian