Re: [PATCH v5 02/10] docs: driver-api: Add I3C documentation

From: Boris Brezillon
Date: Wed Jun 27 2018 - 03:20:56 EST


Hi Randy,

On Tue, 26 Jun 2018 14:07:49 -0700
Randy Dunlap <rdunlap@xxxxxxxxxxxxx> wrote:


> > +
> > +I3C Private SDR transfers
> > +-------------------------
> > +
> > +Private SDR (Single Data Rate) transfers should be used for anything that is
> > +device specific and does not require high transfer speed.
> > +
> > +It is the equivalent of I2C transfers but in the I3C world. Each transfer is
> > +passed the device address (dynamic address assigned during DAA), a payload
> > +and a direction.
> > +
> > +The only difference with I2C is that the transfer is much faster (typical SCL
>
> what is SCL? It's not used anywhere else in this doc.

It's an acronym used by IÂC, it means Serial Clock Line. I'll just
replace that by "typical clock frequency is 12.5MHz".

>
> > +frequency is 12.5MHz).
> > +
> > +I3C HDR commands
> > +----------------
> > +
> > +HDR commands should be used for anything that is device specific and requires
> > +high transfer speed.
> > +
> > +The first thing attached to an HDR command is the HDR mode. There are currently
> > +3 different modes defined by the I3C specification (refer to the specification
> > +for more details):
> > +
> > +* HDR-DDR: Double Data Rate mode
> > +* HDR-TSP: Ternary Symbol Pure. Only usable on busses with no I2C devices
> > +* HDR-TSL: Ternary Symbol Legacy. Usable on busses with I2C devices
> > +
> > +When sending an HDR command, the whole bus has to enter HDR mode, which is done
> > +using a broadcast CCC command.
> > +Once the bus has entered a specific HDR mode, the master sends the HDR command.
> > +An HDR command is made of:
> > +
> > +* one 16-bits command word
> > +* N 16-bits data words
>
> I supposed the I3C spec will tell me the byte order of these words on the bus?
> or this doc could tell us here.

It's big endian. I'll make it clear in this doc.

I'll also fix all the other mistakes you pointed out.

>
> and you can add (if you want to):
> Reviewed-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>

I'll definitely add your R-b. Thanks for the review.

Boris