RE: [[LINUX PATCH v10] 2/4] memory: pl353: Add driver for arm pl353 static memory controller
From: Naga Sureshkumar Relli
Date: Thu Jun 28 2018 - 08:10:45 EST
Hi Linux,
Thanks for the review.
> -----Original Message-----
> From: Linus Walleij [mailto:linus.walleij@xxxxxxxxxx]
> Sent: Thursday, June 28, 2018 12:19 PM
> To: Naga Sureshkumar Relli <nagasure@xxxxxxxxxx>
> Cc: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>; Richard Weinberger <richard@xxxxxx>;
> David Woodhouse <dwmw2@xxxxxxxxxxxxx>; Brian Norris
> <computersforpeace@xxxxxxxxx>; Mark Vasut <marek.vasut@xxxxxxxxx>; Florian Fainelli
> <f.fainelli@xxxxxxxxx>; Markus Mayer <mmayer@xxxxxxxxxxxx>; Roger Quadros
> <rogerq@xxxxxx>; Ladislav Michl <ladis@xxxxxxxxxxxxxx>; ada@xxxxxxxxxxx;
> honghui.zhang@xxxxxxxxxxxx; MiquÃl Raynal <miquel.raynal@xxxxxxxxxxx>; linux-
> mtd@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; nagasureshkumarrelli@xxxxxxxxx;
> Michal Simek <michals@xxxxxxxxxx>
> Subject: Re: [[LINUX PATCH v10] 2/4] memory: pl353: Add driver for arm pl353 static
> memory controller
>
> On Thu, Jun 21, 2018 at 8:43 AM Naga Sureshkumar Relli
> <naga.sureshkumar.relli@xxxxxxxxxx> wrote:
>
> > Add driver for arm pl353 static memory controller. This controller is
> > used in Xilinx Zynq SoC for interfacing the NAND and NOR/SRAM memory devices.
> >
> > Signed-off-by: Naga Sureshkumar Relli
> > <naga.sureshkumar.relli@xxxxxxxxxx>
>
> (...)
>
> > +config PL353_SMC
> > + tristate "ARM PL35X Static Memory Controller(SMC) driver"
> > + default y
> > + depends on ARM
> > + depends on ARCH_ZYNQ
>
> depends on ARM_AMBA
Ok. I will add it next version.
>
> > +#include <linux/platform_device.h>
>
> This is a PrimeCell with the ARM primecell ID registers specified, so it should not use
> platform device.
Thanks for pointing these drivers. Let me go through these.
>
> Use <linux/amba/bus.h>
>
> It further needs to match on these magic values (found in
> 0xfe0 etc) and use the name "apb_pclk" for the peripheral
> (silicon) clock.
>
> See examples such as:
> drivers/mmc/host/mmci.c
> drivers/tty/serial/amba-pl011.c
> drivers/video/fbdev/amba-clcd.c
> drivers/hwtracing/coresight/*
> etc for examples.
>
> Also see and reference the special PrimeCell DT bindings:
> Documentation/devicetree/bindings/arm/primecell.txt
Ok. I will go through these bindings once.
>
> Yours,
> Linus Walleij
Thank for your review.
Regards,
Naga Sureshkumar Relli.