[PATCH v2 4/6] arm64: dts: actions: Enable I2C1 and I2C2 in Bubblegum-96 board

From: Manivannan Sadhasivam
Date: Thu Jun 28 2018 - 14:12:41 EST


Enable I2C1 and I2C2 exposed on the low speed expansion connector in
Bubblegum-96 board.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm64/boot/dts/actions/s900-bubblegum-96.dts | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
index d0ba35df9015..57ae374cfb5a 100644
--- a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
+++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
@@ -7,6 +7,7 @@
/dts-v1/;

#include "s900.dtsi"
+#include "s900-bubblegum-96-pins.dtsi"

/ {
compatible = "ucrobotics,bubblegum-96", "actions,s900";
@@ -35,6 +36,16 @@
clocks = <&cmu CLK_UART5>;
};

+&i2c1 {
+ status = "okay";
+ clocks = <&cmu CLK_I2C1>;
+};
+
+&i2c2 {
+ status = "okay";
+ clocks = <&cmu CLK_I2C2>;
+};
+
/*
* GPIO name legend: proper name = the GPIO line is used as GPIO
* NC = not connected (pin out but not routed from the chip to
--
2.17.1