Re: [PATCH v3 2/6] arm64: dts: actions: Add Actions Semiconductor S900 I2C controller nodes
From: Peter Rosin
Date: Sat Jun 30 2018 - 17:07:22 EST
On June 30, 2018 3:33:26 PM GMT+02:00, Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> wrote:
>Add I2C controller nodes for Actions Semiconductor S900 SoC.
>
>Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
>---
> arch/arm64/boot/dts/actions/s900.dtsi | 60 +++++++++++++++++++++++++++
> 1 file changed, 60 insertions(+)
>
>diff --git a/arch/arm64/boot/dts/actions/s900.dtsi
>b/arch/arm64/boot/dts/actions/s900.dtsi
>index 7ae8b931f000..6f7b89edbe4d 100644
>--- a/arch/arm64/boot/dts/actions/s900.dtsi
>+++ b/arch/arm64/boot/dts/actions/s900.dtsi
>@@ -174,6 +174,66 @@
> #clock-cells = <1>;
> };
>
>+ i2c0: i2c@e0170000 {
>+ compatible = "actions,s900-i2c";
>+ reg = <0 0xe0170000 0 0x1000>;
>+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ status = "disabled";
>+ pinctrl-names = "default";
>+ pinctrl-0 = <&i2c0_default>;
>+ };
>+
>+ i2c1: i2c@e0172000 {
>+ compatible = "actions,s900-i2c";
>+ reg = <0 0xe0172000 0 0x1000>;
>+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ status = "disabled";
>+ pinctrl-names = "default";
>+ pinctrl-0 = <&i2c1_default>;
>+ };
>+
>+ i2c2: i2c@e0174000 {
>+ compatible = "actions,s900-i2c";
>+ reg = <0 0xe0174000 0 0x1000>;
>+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ status = "disabled";
>+ pinctrl-names = "default";
>+ pinctrl-0 = <&i2c2_default>;
>+ };
>+
>+ i2c3: i2c@e0176000 {
>+ compatible = "actions,s900-i2c";
>+ reg = <0 0xe0176000 0 0x1000>;
>+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ status = "disabled";
>+ };
>+
>+ i2c4: i2c@e0178000 {
>+ compatible = "actions,s900-i2c";
>+ reg = <0 0xe0178000 0 0x1000>;
>+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ status = "disabled";
>+ };
>+
>+ i2c5: i2c@e017a000 {
>+ compatible = "actions,s900-i2c";
>+ reg = <0 0xe017a000 0 0x1000>;
>+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ status = "disabled";
>+ };
>+
> pinctrl: pinctrl@e01b0000 {
> compatible = "actions,s900-pinctrl";
> reg = <0x0 0xe01b0000 0x0 0x1000>;
This patch *still* depends on patch 3/6. You need to reorder the series so that it is properly bisectable.
Cheers,
Peter