Re: [PATCH v2 0/3] Add clock driver for Actions S700 SoC

[Parthiban Nallathambi]

Hello Andreas,

On 07/01/2018 08:05 PM, Andreas FÃrber wrote:
> Hi Saravannan,
> 
> Am 28.06.2018 um 21:18 schrieb Saravanan Sekar:
>> Changelog v2:
>> Fixed 0 day compilation warning
>> Modified existing dts Actions S900 clock bindings common to Actions
>> Soc family
> 
> Please post v3 without --in-reply-to. It's becoming messy to read.
> 
>> This patchset adds clock support for Actions Semi OWL series S700 SoC
>> with relevant clock bindings and device tree info. 
>>
>> Changed the UART clock using CMU instance and changes are tested in
>> cubieboard7
> 
> Did you find any better way of testing than my "reboot bootloader" from
> preinstalled Android?

Flashing bootloader.bin and u-boot-dtb.img at below offset trigger the
automatic boot from SD. But ADFU needs to long pressed before connecting
the power.

sudo dd if=bootloader.bin of=/dev/sdX bs=512 seek=4097
sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1024 seek=3072

With this is place, u-boot expects GPT layout by default. I am able to boot
the kernel from FAT/ext by updating the bootcmd/u-boot env accordingly. 

I haven't tried flashing/replacing u-boot in eMMC still.

> 
> In addition to missing Actions Semi you may want to CC Cubietech.

+Added cubitech linux group.

> 
> Thanks,
> Andreas
> 

-- 
Thanks,
Parthiban N