[PATCH v4 6/6] arm64: dts: sdm845: Add tsens nodes

[Amit Kucheria]

SDM845 has two tsens blocks, one with 13 sensors and the other with 8
sensors.

Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index cdaabeb..edf8505 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -221,6 +221,22 @@
 			#interrupt-cells = <2>;
 		};
 
+		tsens0: tsens@c222000 {
+			compatible = "qcom,tsens-v2.4.0", "qcom,tsens-v2";
+			reg = <0xc263000 0x1ff>, /* TM */
+			      <0xc222000 0x1ff>; /* SROT */
+			#qcom,sensors = <13>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: tsens@c223000 {
+			compatible = "qcom,tsens-v2.4.0", "qcom,tsens-v2";
+			reg = <0xc265000 0x1ff>, /* TM */
+			      <0xc223000 0x1ff>; /* SROT */
+			#qcom,sensors = <8>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0xc440000 0x1100>,
-- 
2.7.4