Re: [PATCH 0/2] serial: 8250_dw: add fractional divisor support

[Jisheng Zhang]

Hi,

On Mon, 2 Jul 2018 14:51:03 +0300 Andy Shevchenko wrote:

> On Mon, 2018-07-02 at 13:18 +0300, Andy Shevchenko wrote:
> > On Mon, 2018-07-02 at 18:04 +0800, Jisheng Zhang wrote:  
> > > For Synopsys DesignWare 8250 uart which version >= 4.00a, there's a
> > > valid divisor latch fraction register. The fractional divisor width
> > > is
> > > 4bits ~ 6bits.
> > >   
> > 
> > There are several serial IPs that have fractional divider built-in.
> > None
> > is using any specific hooks. Why do you need in your case, esp. taking
> > into consideration that we have a custom ->set_termios() callback?  
> 
> Okay, I see that in 8250 we have hooks embedded into 8250_port.c which
> is not the best solution.
> 
> For example it prevents better splitting Exar code.
> So, we would need these hooks, but better to integrate them in the same
> way like it's done for the rest of 8250 ones, i.e.
> - rename existing to have a "do" word
> - create new functions which would be a replacement that choose between
> "do" variant and custom one
> - not sure if we need to export "do" variants (at least for now)

So you mean add the support as following:

1.rename current serial8250_set_divisor as serial8250_do_set_divisor

2.add a new serial8250_set_divisor which will be as simple as

static void serial8250_set_divisor(struct uart_port *port, ...)
{
	struct uart_8250_port *up = up_to_u8250p(port);

	if (up->set_divisor)
		up->set_divisor(...);
	else
		serial8250_do_set_divisor(...);
}

could you please confirm?

Another issue is I'm not sure which struct to add the hook,
struct uart_port or struct uart_8250_port? Currently, it seems that only
uart_8250_port needs this hook, sure, adding the hook to struct uart_port
is fine either. Could you please kindly give some suggestions?

Thanks,
Jisheng