Re: [PATCH 1/7 v5] Docs: dt: add fsl-mc iommu-map device-tree binding

[Robin Murphy]

On 20/05/18 14:49, Nipun Gupta wrote:
> The existing IOMMU bindings cannot be used to specify the relationship
> between fsl-mc devices and IOMMUs. This patch adds a generic binding for
> mapping fsl-mc devices to IOMMUs, using iommu-map property.
>
> Signed-off-by: Nipun Gupta <nipun.gupta@xxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> ---
>   .../devicetree/bindings/misc/fsl,qoriq-mc.txt      | 39 ++++++++++++++++++++++
>   1 file changed, 39 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
> index 6611a7c..8cbed4f 100644
> --- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
> +++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
> @@ -9,6 +9,25 @@ blocks that can be used to create functional hardware objects/devices
>   such as network interfaces, crypto accelerator instances, L2 switches,
>   etc.
>   
> +For an overview of the DPAA2 architecture and fsl-mc bus see:
> +drivers/staging/fsl-mc/README.txt

Nit: Looks like that's Documentation/networking/dpaa2/overview.rst now.

> +
> +As described in the above overview, all DPAA2 objects in a DPRC share the
> +same hardware "isolation context" and a 10-bit value called an ICID
> +(isolation context id) is expressed by the hardware to identify
> +the requester.
> +
> +The generic 'iommus' property is insufficient to describe the relationship
> +between ICIDs and IOMMUs, so an iommu-map property is used to define
> +the set of possible ICIDs under a root DPRC and how they map to
> +an IOMMU.
> +
> +For generic IOMMU bindings, see
> +Documentation/devicetree/bindings/iommu/iommu.txt.
> +
> +For arm-smmu binding, see:
> +Documentation/devicetree/bindings/iommu/arm,smmu.txt.
> +
>   Required properties:
>   
>       - compatible
> @@ -88,14 +107,34 @@ Sub-nodes:
>                 Value type: <phandle>
>                 Definition: Specifies the phandle to the PHY device node associated
>                             with the this dpmac.
> +Optional properties:
> +
> +- iommu-map: Maps an ICID to an IOMMU and associated iommu-specifier
> +  data.
> +
> +  The property is an arbitrary number of tuples of
> +  (icid-base,iommu,iommu-base,length).
> +
> +  Any ICID i in the interval [icid-base, icid-base + length) is
> +  associated with the listed IOMMU, with the iommu-specifier
> +  (i - icid-base + iommu-base).
>   
>   Example:
>   
> +        smmu: iommu@5000000 {
> +               compatible = "arm,mmu-500";
> +               #iommu-cells = <2>;

This should be 1 if stream-match-mask is present. Bad example is bad :)

Robin.

> +               stream-match-mask = <0x7C00>;
> +               ...
> +        };
> +
>           fsl_mc: fsl-mc@80c000000 {
>                   compatible = "fsl,qoriq-mc";
>                   reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
>                         <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
>                   msi-parent = <&its>;
> +                /* define map for ICIDs 23-64 */
> +                iommu-map = <23 &smmu 23 41>;
>                   #address-cells = <3>;
>                   #size-cells = <1>;
>