Re: [PATCH V2 2/7] mmc: sdhci: made changes for System Address register of SDMA
From: Chunyan Zhang
Date: Tue Jul 03 2018 - 23:03:29 EST
On 21 June 2018 at 19:22, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
> On 15/06/18 05:04, Chunyan Zhang wrote:
>> According to the SD host controller specification version 4.10, when
>> Host Version 4 is enabled, SDMA uses ADMA System Address register
>> (05Fh-058h) instead of using SDMA System Address register to
>> support both 32-bit and 64-bit addressing.
>>
>> Signed-off-by: Chunyan Zhang <zhang.chunyan@xxxxxxxxxx>
>> ---
>> drivers/mmc/host/sdhci.c | 10 ++++++++--
>> 1 file changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
>> index cf5695f..f57201f 100644
>> --- a/drivers/mmc/host/sdhci.c
>> +++ b/drivers/mmc/host/sdhci.c
>> @@ -805,6 +805,7 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
>> static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
>> {
>> u8 ctrl;
>> + u32 reg;
>
> reg could just be an int.
Why? Shouldn't addresses be unsigned?
>
>> struct mmc_data *data = cmd->data;
>>
>> if (sdhci_data_line_cmd(cmd))
>> @@ -894,8 +895,10 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
>> SDHCI_ADMA_ADDRESS_HI);
>> } else {
>> WARN_ON(sg_cnt != 1);
>> + reg = host->v4_mode ? SDHCI_ADMA_ADDRESS :
>> + SDHCI_DMA_ADDRESS;
>> sdhci_writel(host, sdhci_sdma_address(host),
>> - SDHCI_DMA_ADDRESS);
>> + reg);
>
> Shouldn't we support 64-bit SDMA in version 4 mode?
I will address.
>
>
>> }
>> }
>>
>> @@ -2721,6 +2724,7 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
>> */
>> if (intmask & SDHCI_INT_DMA_END) {
>> u32 dmastart, dmanow;
>> + u32 reg;
>>
>> dmastart = sdhci_sdma_address(host);
>> dmanow = dmastart + host->data->bytes_xfered;
>> @@ -2733,7 +2737,9 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
>> host->data->bytes_xfered = dmanow - dmastart;
>> DBG("DMA base 0x%08x, transferred 0x%06x bytes, next 0x%08x\n",
>> dmastart, host->data->bytes_xfered, dmanow);
>> - sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
>> + reg = host->v4_mode ? SDHCI_ADMA_ADDRESS :
>> + SDHCI_DMA_ADDRESS;
>> + sdhci_writel(host, dmanow, reg);
>
> Shouldn't we support 64-bit SDMA in version 4 mode?
>
>> }
>>
>> if (intmask & SDHCI_INT_DATA_END) {
>>
>