[PATCH v3 4/9] ARM: dts: s5pv210: Add initial DTS for SGH-T959P phone
From: PaweÅ Chmiel
Date: Fri Jul 06 2018 - 14:33:39 EST
From: Jonathan Bakker <xc-racer2@xxxxxxx>
This DTS file have initial support Samsung SGH-T959P phone,
also known as Samsung Galaxy S 4G or fascinate4g.
It belongs to Samsung Aries devices family.
Initial version have support for:
- sdcard
- max8998 pmic and rtc
- max17040 fuel gauge
- gpio keys
- fimd (no panel driver yet)
- usb (peripherial mode)
- wifi
Signed-off-by: Jonathan Bakker <xc-racer2@xxxxxxx>
Signed-off-by: PaweÅ Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
---
Changes from v1:
- Added missing commit msg
- Removed duplicated and unneeded headers
- Added stdout-path
- Added information why we hardcode bootargs
---
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/s5pv210-fascinate4g.dts | 45 +++++++++++++++++++++++++++++++
2 files changed, 46 insertions(+)
create mode 100644 arch/arm/boot/dts/s5pv210-fascinate4g.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 522ebdca1d3d..d00e995875bb 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -846,6 +846,7 @@ dtb-$(CONFIG_ARCH_S3C64XX) += \
s3c6410-smdk6410.dtb
dtb-$(CONFIG_ARCH_S5PV210) += \
s5pv210-aquila.dtb \
+ s5pv210-fascinate4g.dtb \
s5pv210-galaxys.dtb \
s5pv210-goni.dtb \
s5pv210-smdkc110.dtb \
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
new file mode 100644
index 000000000000..ccf761b1babf
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "s5pv210-aries.dtsi"
+
+/ {
+ model = "Samsung Galaxy S Fascinate 4G (SGH-T959P) based on S5PV210";
+ compatible = "samsung,fascinate4g", "samsung,aries", "samsung,s5pv210";
+
+ chosen {
+ stdout-path = &uart2;
+ /*
+ * It's hard to change those parameters in stock bootloader,
+ * since it requires special hardware/cable.
+ * Let's hardocde bootargs for now, till u-boot port is finished,
+ * with which it should be easier.
+ */
+ bootargs = "root=/dev/mmcblk1p1 rw rootwait ignore_loglevel earlyprintk";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "power";
+ gpios = <&gph2 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ vol-down {
+ label = "volume_down";
+ gpios = <&gph3 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ vol-up {
+ label = "volume_up";
+ gpios = <&gph3 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+};
--
2.7.4