Re: [PATCH v6 6/7] dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP

[Bjorn Andersson]

On Mon 09 Jul 04:43 PDT 2018, Amit Kucheria wrote:

> We want to create common code for v2 of the TSENS IP block that is used in
> a large number of Qualcomm SoCs. "qcom,tsens-v2" should be able to handle
> most of the common functionality start with a common get_temp() function.
> 
> It is also necessary to split out the memory regions for the TM and SROT
> register banks because their offsets are not constant across SoC families.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> ---
>  .../devicetree/bindings/thermal/qcom-tsens.txt     | 25 +++++++++++++++++-----
>  1 file changed, 20 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> index 06195e8..8f963b1 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> @@ -1,10 +1,16 @@
>  * QCOM SoC Temperature Sensor (TSENS)
>  
>  Required properties:
> -- compatible :
> - - "qcom,msm8916-tsens" : For 8916 Family of SoCs
> - - "qcom,msm8974-tsens" : For 8974 Family of SoCs
> - - "qcom,msm8996-tsens" : For 8996 Family of SoCs
> +- compatible:
> +  Must be one of the following:
> +    - "qcom,msm8916-tsens" (MSM8916)
> +    - "qcom,msm8974-tsens" (MSM8974)
> +    - "qcom,msm8996-tsens" (MSM8996)
> +    - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
> +    - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
> +  The generic "qcom,tsens-v2" property must be used as a fallback for any SoC with
> +  version 2 of the TSENS IP. MSM8996 is the only exception beacause the generic
> +  property did not exist when support was added.
>  
>  - reg: Address range of the thermal registers
>  - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
> @@ -12,7 +18,7 @@ Required properties:
>  - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
>  nvmem cells
>  
> -Example:
> +Example 1 (legacy support before a fallback tsens-v2 propoerty was introduced):
>  tsens: thermal-sensor@900000 {
>  		compatible = "qcom,msm8916-tsens";
>  		reg = <0x4a8000 0x2000>;
> @@ -20,3 +26,12 @@ tsens: thermal-sensor@900000 {
>  		nvmem-cell-names = "caldata", "calsel";
>  		#thermal-sensor-cells = <1>;
>  	};
> +
> +Example 2 (for any platform containing v2 of the TSENS IP):
> +tsens0: tsens@c222000 {
> +		compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> +		reg = <0xc263000 0x1ff>, /* TM */
> +			<0xc222000 0x1ff>; /* SROT */
> +		#qcom,sensors = <13>;
> +		#thermal-sensor-cells = <1>;
> +	};
> -- 
> 2.7.4
>