RE: [PATCH V2] mmc: core: improve reasonableness of bus width setting for HS400es
From: Fang Hongjie(æææ)
Date: Mon Jul 16 2018 - 07:02:17 EST
> On 11 July 2018 at 05:00, Hongjie Fang <hongjiefang@xxxxxxxxxxxx> wrote:
> > mmc_select_hs400es() calls mmc_select_bus_width() which will continue
> > to set 4bit transfer mode if fail to set 8bit mode. The bus width
> > should not be set to 4bit in HS400es.
> >
> > When fail to set 8bit mode, need return error directly for HS400es.
> >
> > Signed-off-by: Hongjie Fang <hongjiefang@xxxxxxxxxxxx>
> > ---
> > drivers/mmc/core/mmc.c | 5 ++++-
> > 1 file changed, 4 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> > index 4466f5d..4bd6c09 100644
> > --- a/drivers/mmc/core/mmc.c
> > +++ b/drivers/mmc/core/mmc.c
> > @@ -1021,8 +1021,11 @@ static int mmc_select_bus_width(struct mmc_card *card)
> > EXT_CSD_BUS_WIDTH,
> > ext_csd_bits[idx],
> > card->ext_csd.generic_cmd6_time);
> > - if (err)
> > + if (err) {
> > + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400ES)
> > + return err;
> > continue;
> > + }
>
> I would rather let mmc_select_hs400es() check the return code from
> mmc_select_bus_width().
>
> So, if the return code isn't MMC_BUS_WIDTH_8, mmc_select_hs400es()
> should bail out.
Yeah, it is better that let mmc_select_hs400es() check the return value.
I will update the patch.
>
> [...]
>
> Kind regards
> Uffe
B&R
Hongjie