Re: [PATCH 2/2] arm64: dts: mt7622: update a clock property for UART0

[Ryder Lee]

Hi,

On Mon, 2018-07-16 at 15:55 +0200, Matthias Brugger wrote:
> Hi Ryder,
> 
> On 10/07/18 09:55, Ryder Lee wrote:
> > The input clock of UART0 should be CLK_PERI_UART0_PD.
> > 
> > Signed-off-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
> 
> Can you provide a "Fixes" tag with the commit id of the commit that broke this?
> 
> Thanks,
> Matthias

I've sent a new one with a "Fixes" tag.

Ryder
> 
> > ---
> >  arch/arm64/boot/dts/mediatek/mt7622.dtsi | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > index 8cdec52..4caa9b4 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > @@ -367,7 +367,7 @@
> >  		reg = <0 0x11002000 0 0x400>;
> >  		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
> >  		clocks = <&topckgen CLK_TOP_UART_SEL>,
> > -			 <&pericfg CLK_PERI_UART1_PD>;
> > +			 <&pericfg CLK_PERI_UART0_PD>;
> >  		clock-names = "baud", "bus";
> >  		status = "disabled";
> >  	};
> >