Re: [PATCH v2 1/2] dt-bindings: ufs: Add UFS platform driver for Cadence UFS
From: Rob Herring
Date: Mon Jul 16 2018 - 12:11:18 EST
On Thu, Jul 12, 2018 at 11:58:04AM +0000, Janek Kotas wrote:
> This patch adds a device tree platform
> driver description for Cadence UFS Controller.
Bindings are not platform drivers...
>
> Signed-off-by: Jan Kotas <jank@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/ufs/cdns,ufshc.txt | 31 ++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
>
> diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
> new file mode 100644
> index 0000000..cb6d62a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
> @@ -0,0 +1,31 @@
> +* Cadence Universal Flash Storage (UFS) Controller
> +
> +UFS nodes are defined to describe on-chip UFS host controllers.
> +Each UFS controller instance should have its own node.
> +
> +Required properties:
> +- compatible : compatible list, contains the following controller:
> + "cdns,ufshc"
> + complemented with the JEDEC version:
> + "jedec,ufs-2.0"
> +
> +- reg : address and length of the UFS register set
> +- interrupts : one interrupt mapping
> +- clocks : List of phandle and clock specifier pairs.
> +- clock-names : List of clock input name strings sorted in the same
> + order as the clocks property. "core" is mandatory.
And phy?
> +- freq-table-hz : Array of <min max> operating frequencies stored in the same
> + order as the clocks property. If this property is not
> + defined or a value in the array is "0" then it is assumed
> + that the frequency is set by the parent clock or a
> + fixed rate clock source.
Don't define again here. Just refer to the common definition.
> +
> +Example:
> + ufs@fd030000 {
> + compatible = "cdns,ufshc", "jedec,ufs-2.0";
> + reg = <0xfd030000 0x10000>;
> + interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
> + freq-table-hz = <0 0>, <0 0>;
> + clocks = <&ufs_core_clk>, <&ufs_phy_clk>;
> + clock-names = "core_clk", "phy_clk";
Doesn't match the doc.
> + };
> --
> 1.9.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html