KMS does not work on MSI B350M MORTAR with AMD Ryzen 3 2200g

From: Paul Menzel
Date: Mon Jul 16 2018 - 12:14:29 EST

Next message:
Previous message:
Next in thread:
Messages sorted

Dear Linux folks,

Trying to boot Debian Buster/testing with a Ryzen 3 2200g and a (KMS) is enabled the monitor see the login prompt and only The system seems to running though.

Debianâs package *firmware-amd-graphics* outdated. I manually installed repository [3].

Here is the log.

```
Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ Jul 16 17:54:39 tokeiihto kernel: [ ```

The messages `[drm] BIOS signature mainboard firmware version
Booting with `nomodeset` works.

Please find attached the full beginning, and the nomodeset
Do you have any hints how

Kind regards,

Paul

PS: Here is the output of `lspci`.

```
$ lspci -nn
00:00.0 Host bridge [0600]: 00:00.2 IOMMU [0806]: Advanced 00:01.0 Host bridge [0600]: 00:01.2 PCI bridge [0604]: 00:08.0 Host bridge [0600]: 00:08.1 PCI bridge [0604]: 00:08.2 PCI bridge [0604]: 00:14.0 SMBus [0c05]: Advanced 00:14.3 ISA bridge [0601]: 00:18.0 Host bridge [0600]: 00:18.1 Host bridge [0600]: 00:18.2 Host bridge [0600]: 00:18.3 Host bridge [0600]: 00:18.4 Host bridge [0600]: 00:18.5 Host bridge [0600]: 00:18.6 Host bridge [0600]: 00:18.7 Host bridge [0600]: 15:00.0 USB controller [0c03]: 15:00.1 SATA controller [0106]: 15:00.2 PCI bridge [0604]: 16:00.0 PCI bridge [0604]: 16:01.0 PCI bridge [0604]: 16:04.0 PCI bridge [0604]: 18:00.0 Ethernet controller 38:00.0 VGA compatible controller 38:00.1 Audio device [0403]: 38:00.2 Encryption controller 38:00.3 USB controller [0c03]: 38:00.4 USB controller [0c03]: 38:00.6 Audio device [0403]: 39:00.0 SATA controller [0106]: ```

[1]: Description: S/MIME Rich Felker: "cpu_no_speculation omissions?" Frederic Weisbecker: "Re: [tip:sched/core] sched/cputime: Ensure accurate utime and stime ratio in cputime_adjust()" Alex Deucher: "Re: KMS does not work on MSI B350M MORTAR with AMD Ryzen 3 2200g" by: [ date ] [ thread ] [ subject ] [ author ] with Linux 4.16.16 on a MSI B350M MORTAR [1]
monitor connected over HDMI, when kernel mode setting
does not receive any updates, that means I do not
the Linux and systemd service messages from before.
[2] is from August 2017 and therefore
the firmware files from the Linux firmware
25.652026] [drm] BIOS signature incorrect 0 0
25.652058] ATOM BIOS: 113-RAVEN-106
25.652096] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
25.652107] amdgpu 0000:38:00.0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used)
25.652109] amdgpu 0000:38:00.0: GTT: 1024M 0x000000F500000000 - 0x000000F53FFFFFFF
25.652113] [drm] Detected VRAM RAM=1024M, BAR=256M
25.652114] [drm] RAM width 128bits UNKNOWN
25.652170] [TTM] Zone kernel: Available graphics memory: 7703370 kiB
25.652171] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
25.652171] [TTM] Initializing pool allocator
25.652174] [TTM] Initializing DMA pool allocator
25.652202] [drm] amdgpu: 1024M of VRAM memory ready
25.652203] [drm] amdgpu: 3072M of GTT memory ready.
25.652220] [drm] GART: num cpu pages 262144, num gpu pages 262144
25.652433] [drm] PCIE GART of 1024M enabled (table at 0x000000F400800000).
25.652541] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
25.652541] [drm] Driver supports precise vblank timestamp query.
25.652983] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_asd.bin
25.653276] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_pfp.bin
25.653498] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_me.bin
25.653668] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_ce.bin
25.653960] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_rlc.bin
25.654817] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_mec.bin
25.656137] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_mec2.bin
25.658217] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_sdma.bin
25.658220] [drm] use_doorbell being set to: [true]
25.659663] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_vcn.bin
25.659667] [drm] Found VCN firmware Version: 1.73 Family ID: 18
25.847424] [drm] VCN decode and encode initialized successfully.
25.852189] amdgpu 0000:38:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0
25.852191] amdgpu 0000:38:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0
25.852193] amdgpu 0000:38:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0
25.852194] amdgpu 0000:38:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0
25.852195] amdgpu 0000:38:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0
25.852197] amdgpu 0000:38:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0
25.852198] amdgpu 0000:38:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0
25.852200] amdgpu 0000:38:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0
25.852201] amdgpu 0000:38:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0
25.852202] amdgpu 0000:38:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0
25.852204] amdgpu 0000:38:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1
25.852205] amdgpu 0000:38:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1
25.852207] amdgpu 0000:38:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1
25.852208] amdgpu 0000:38:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1
25.856580] [drm] Initialized amdgpu 3.23.0 20150101 for 0000:38:00.0 on minor 0
incorrect 0 0` stands out. The latest
7A37v1F from May 2018 is installed [4].
log with the KMS boot messages in the
messages in the second part.
to get modesetting to work?
Advanced Micro Devices, Inc. [AMD] Device [1022:15d0]
Micro Devices, Inc. [AMD] Device [1022:15d1]
Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge [1022:1452]
Advanced Micro Devices, Inc. [AMD] Device [1022:15d3]
Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge [1022:1452]
Advanced Micro Devices, Inc. [AMD] Device [1022:15db]
Advanced Micro Devices, Inc. [AMD] Device [1022:15dc]
Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 61)
Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e] (rev 51)
Advanced Micro Devices, Inc. [AMD] Device [1022:15e8]
Advanced Micro Devices, Inc. [AMD] Device [1022:15e9]
Advanced Micro Devices, Inc. [AMD] Device [1022:15ea]
Advanced Micro Devices, Inc. [AMD] Device [1022:15eb]
Advanced Micro Devices, Inc. [AMD] Device [1022:15ec]
Advanced Micro Devices, Inc. [AMD] Device [1022:15ed]
Advanced Micro Devices, Inc. [AMD] Device [1022:15ee]
Advanced Micro Devices, Inc. [AMD] Device [1022:15ef]
Advanced Micro Devices, Inc. [AMD] 300 Series Chipset USB 3.1 xHCI Controller [1022:43bb] (rev 02)
Advanced Micro Devices, Inc. [AMD] 300 Series Chipset SATA Controller [1022:43b7] (rev 02)
Advanced Micro Devices, Inc. [AMD] Device [1022:43b2] (rev 02)
Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02)
Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02)
Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02)
[0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
[0300]: Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] [1002:15dd] (rev c8)
Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:15de]
[1080]: Advanced Micro Devices, Inc. [AMD] Device [1022:15df]
Advanced Micro Devices, Inc. [AMD] Device [1022:15e0]
Advanced Micro Devices, Inc. [AMD] Device [1022:15e1]
Advanced Micro Devices, Inc. [AMD] Device [1022:15e3]
Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901] (rev 61)
://www.msi.com/Motherboard/B350M-MORTAR/">https://www.msi.com/Motherboard/B350M-MORTAR/
://packages.debian.org/buster/firmware-amd-graphics">https://packages.debian.org/buster/firmware-amd-graphics
://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/">https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/
://www.msi.com/Motherboard/support/B350M-MORTAR">https://www.msi.com/Motherboard/support/B350M-MORTAR
0.000000] Linux version 4.16.0-2-amd64 (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 7.3.0 (Debian 7.3.0-23)) #1 SMP Debian 4.16.16-2 (2018-06-22)
0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.16.0-2-amd64 root=UUID=313f78e2-468f-4660-b236-d1de214bf6b4 ro quiet
0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
0.000000] e820: BIOS-provided physical RAM map:
0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
0.000000] BIOS-e820: [mem 0x000000000400a000-0x0000000009d7ffff] usable
0.000000] BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
0.000000] BIOS-e820: [mem 0x000000000b020000-0x000000009d1e4fff] usable
0.000000] BIOS-e820: [mem 0x000000009d1e5000-0x000000009d2d4fff] reserved
0.000000] BIOS-e820: [mem 0x000000009d2d5000-0x000000009d3c6fff] usable
0.000000] BIOS-e820: [mem 0x000000009d3c7000-0x000000009d78ffff] ACPI NVS
0.000000] BIOS-e820: [mem 0x000000009d790000-0x000000009e5bffff] reserved
0.000000] BIOS-e820: [mem 0x000000009e5c0000-0x000000009e664fff] type 20
0.000000] BIOS-e820: [mem 0x000000009e665000-0x000000009effffff] usable
0.000000] BIOS-e820: [mem 0x000000009f000000-0x00000000dfffffff] reserved
0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
0.000000] BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved
0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f33ffff] usable
0.000000] NX (Execute Disable) protection: active
0.000000] efi: EFI v2.60 by American Megatrends
0.000000] efi: ACPI 2.0=0x9d3c7000 ACPI=0x9d3c7000 SMBIOS=0x9e48d000 ESRT=0x98880f98 MEMATTR=0x97a58018
0.000000] secureboot: Secure boot could not be determined (mode 0)
0.000000] SMBIOS 2.8 present.
0.000000] DMI: MSI MS-7A37/B350M MORTAR (MS-7A37), BIOS 1.F0 04/27/2018
0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
0.000000] e820: last_pfn = 0x41f340 max_arch_pfn = 0x400000000
0.000000] MTRR default type: uncachable
0.000000] MTRR fixed ranges enabled:
0.000000] 00000-9FFFF write-back
0.000000] A0000-BFFFF write-through
0.000000] C0000-FFFFF write-protect
0.000000] MTRR variable ranges enabled:
0.000000] 0 base 000000000000 mask FFFF80000000 write-back
0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
0.000000] 3 disabled
0.000000] 4 disabled
0.000000] 5 disabled
0.000000] 6 disabled
0.000000] 7 disabled
0.000000] TOM2: 0000000420000000 aka 16896M
0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
0.000000] e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
0.000000] esrt: Reserving ESRT space from 0x0000000098880f98 to 0x0000000098880fd0.
0.000000] Base memory trampoline at [ (ptrval)] 96000 size 24576
0.000000] Using GB pages for direct mapping
0.000000] BRK [0x28f82c000, 0x28f82cfff] PGTABLE
0.000000] BRK [0x28f82d000, 0x28f82dfff] PGTABLE
0.000000] BRK [0x28f82e000, 0x28f82efff] PGTABLE
0.000000] BRK [0x28f82f000, 0x28f82ffff] PGTABLE
0.000000] BRK [0x28f830000, 0x28f830fff] PGTABLE
0.000000] BRK [0x28f831000, 0x28f831fff] PGTABLE
0.000000] BRK [0x28f832000, 0x28f832fff] PGTABLE
0.000000] BRK [0x28f833000, 0x28f833fff] PGTABLE
0.000000] BRK [0x28f834000, 0x28f834fff] PGTABLE
0.000000] BRK [0x28f835000, 0x28f835fff] PGTABLE
0.000000] BRK [0x28f836000, 0x28f836fff] PGTABLE
0.000000] BRK [0x28f837000, 0x28f837fff] PGTABLE
0.000000] RAMDISK: [mem 0x34e69000-0x3672bfff]
0.000000] ACPI: Early table checksum verification disabled
0.000000] ACPI: RSDP 0x000000009D3C7000 000024 (v02 ALASKA)
0.000000] ACPI: XSDT 0x000000009D3C70A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
0.000000] ACPI: FACP 0x000000009D3CE8B8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180105/tbfadt-658)
0.000000] ACPI: DSDT 0x000000009D3C71F0 0076C7 (v02 ALASKA A M I 01072009 INTL 20120913)
0.000000] ACPI: FACS 0x000000009D779E00 000040
0.000000] ACPI: APIC 0x000000009D3CE9D0 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
0.000000] ACPI: FPDT 0x000000009D3CEAB0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
0.000000] ACPI: FIDT 0x000000009D3CEAF8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
0.000000] ACPI: SSDT 0x000000009D3CEB98 005367 (v02 AMD AmdTable 00000002 MSFT 02000002)
0.000000] ACPI: SSDT 0x000000009D3D3F00 0007DC (v01 AMD AMD CPU 00000001 AMD 00000001)
0.000000] ACPI: CRAT 0x000000009D3D46E0 000810 (v01 AMD AMD CRAT 00000001 AMD 00000001)
0.000000] ACPI: CDIT 0x000000009D3D4EF0 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
0.000000] ACPI: SSDT 0x000000009D3D4F20 002D89 (v01 AMD AMD AOD 00000001 INTL 20120913)
0.000000] ACPI: MCFG 0x000000009D3D7CB0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
0.000000] ACPI: HPET 0x000000009D3D7CF0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
0.000000] ACPI: UEFI 0x000000009D3D7D28 000042 (v01 00000000 00000000)
0.000000] ACPI: IVRS 0x000000009D3D7D70 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
0.000000] ACPI: BGRT 0x000000009D3D7E40 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
0.000000] ACPI: SSDT 0x000000009D3D7E78 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
0.000000] ACPI: SSDT 0x000000009D3D7F70 000E96 (v01 AMD AmdTable 00000001 INTL 20120913)
0.000000] ACPI: SSDT 0x000000009D3D8E08 000850 (v01 AMD AmdTable 00000001 INTL 20120913)
0.000000] ACPI: SSDT 0x000000009D3D9658 001A41 (v01 AMD AmdTable 00000001 INTL 20120913)
0.000000] ACPI: WSMT 0x000000009D3DB0A0 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] No NUMA configuration found
0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f33ffff]
0.000000] NODE_DATA(0) allocated [mem 0x41f33b000-0x41f33ffff]
0.000000] tsc: Fast TSC calibration failed
0.000000] tsc: Using PIT calibration value
0.000000] Zone ranges:
0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
0.000000] Normal [mem 0x0000000100000000-0x000000041f33ffff]
0.000000] Device empty
0.000000] Movable zone start for each node
0.000000] Early memory node ranges
0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
0.000000] node 0: [mem 0x0000000000100000-0x0000000003ffffff]
0.000000] node 0: [mem 0x000000000400a000-0x0000000009d7ffff]
0.000000] node 0: [mem 0x000000000a000000-0x000000000affffff]
0.000000] node 0: [mem 0x000000000b020000-0x000000009d1e4fff]
0.000000] node 0: [mem 0x000000009d2d5000-0x000000009d3c6fff]
0.000000] node 0: [mem 0x000000009e665000-0x000000009effffff]
0.000000] node 0: [mem 0x0000000100000000-0x000000041f33ffff]
0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f33ffff]
0.000000] On node 0 totalpages: 3919015
0.000000] DMA zone: 64 pages used for memmap
0.000000] DMA zone: 28 pages reserved
0.000000] DMA zone: 3999 pages, LIFO batch:0
0.000000] DMA32 zone: 10024 pages used for memmap
0.000000] DMA32 zone: 641480 pages, LIFO batch:31
0.000000] Normal zone: 51149 pages used for memmap
0.000000] Normal zone: 3273536 pages, LIFO batch:31
0.000000] Reserved but unavailable: 97 pages
0.000000] ACPI: PM-Timer IO Port: 0x808
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
0.000000] ACPI: IRQ0 used by override.
0.000000] ACPI: IRQ9 used by override.
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
0.000000] PM: Registered nosave memory: [mem 0x04000000-0x04009fff]
0.000000] PM: Registered nosave memory: [mem 0x09d80000-0x09ffffff]
0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
0.000000] PM: Registered nosave memory: [mem 0x9d1e5000-0x9d2d4fff]
0.000000] PM: Registered nosave memory: [mem 0x9d3c7000-0x9d78ffff]
0.000000] PM: Registered nosave memory: [mem 0x9d790000-0x9e5bffff]
0.000000] PM: Registered nosave memory: [mem 0x9e5c0000-0x9e664fff]
0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xdfffffff]
0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfd7fffff]
0.000000] PM: Registered nosave memory: [mem 0xfd800000-0xfdffffff]
0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
0.000000] Booting paravirtualized kernel on bare hardware
0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
0.000000] random: get_random_bytes called from start_kernel+0x94/0x4d3 with crng_init=0
0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
0.000000] percpu: Embedded 44 pages/cpu @ (ptrval) s142296 r8192 d29736 u262144
0.000000] pcpu-alloc: s142296 r8192 d29736 u262144 alloc=1*2097152
0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3857750
0.000000] Policy zone: Normal
0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.16.0-2-amd64 root=UUID=313f78e2-468f-4660-b236-d1de214bf6b4 ro quiet
0.000000] Calgary: detecting Calgary via BIOS EBDA area
0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
0.000000] Memory: 15228176K/15676060K available (10252K kernel code, 1182K rwdata, 3136K rodata, 1524K init, 688K bss, 447884K reserved, 0K cma-reserved)
0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
0.000000] ftrace: allocating 29954 entries in 118 pages
0.000000] Hierarchical RCU implementation.
0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
0.000000] NR_IRQS: 33024, nr_irqs: 1096, preallocated irqs: 16
0.000000] Console: colour dummy device 80x25
0.000000] console [tty0] enabled
0.000000] ACPI: Core revision 20180105
0.000000] ACPI BIOS Error (bug): Failure creating [\_SB.SMIC], AE_ALREADY_EXISTS (20180105/dswload-380)
0.000000] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180105/psobject-252)
0.000000] ACPI Error: AE_ALREADY_EXISTS, (SSDT: AMD PT) while loading table (20180105/tbxfload-228)
0.000000] ACPI Error: 1 table load failures, 7 successful (20180105/tbxfload-246)
0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
0.000000] hpet clockevent registered
0.000000] APIC: Switch to symmetric I/O mode setup
0.004000] Switched APIC routing to physical flat.
0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
0.024000] tsc: Fast TSC calibration failed
0.032000] tsc: PIT calibration matches HPET. 1 loops
0.032000] tsc: Detected 3499.923 MHz processor
0.032000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x32730827544, max_idle_ns: 440795306377 ns
0.032000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6999.84 BogoMIPS (lpj=13999692)
0.032000] pid_max: default: 32768 minimum: 301
0.032000] Security Framework initialized
0.032000] Yama: disabled by default; enable with sysctl kernel.yama.*
0.032000] AppArmor: AppArmor initialized
0.038025] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
0.039249] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
0.039355] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
0.039392] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
0.039768] CPU: Physical Processor ID: 0
0.039769] CPU: Processor Core ID: 0
0.039875] mce: CPU supports 23 MCE banks
0.039891] LVT offset 1 assigned for vector 0xf9
0.039938] LVT offset 2 assigned for vector 0xf4
0.039948] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
0.039948] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
0.039949] Spectre V2 : Mitigation: Full AMD retpoline
0.039950] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
0.039951] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
0.044727] Freeing SMP alternatives memory: 24K
0.056000] smpboot: CPU0: AMD Ryzen 3 2200G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0)
0.056000] Performance Events: Fam17h core perfctr, AMD PMU driver.
0.056000] ... version: 0
0.056000] ... bit width: 48
0.056000] ... generic registers: 6
0.056000] ... value mask: 0000ffffffffffff
0.056000] ... max period: 00007fffffffffff
0.056000] ... fixed-purpose events: 0
0.056000] ... event mask: 000000000000003f
0.056000] Hierarchical SRCU implementation.
0.056000] smp: Bringing up secondary CPUs ...
0.056000] x86: Booting SMP configuration:
0.056000] .... node #0, CPUs: #1
0.056018] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
0.056147] #2 #3
0.062403] smp: Brought up 1 node, 4 CPUs
0.062403] smpboot: Max logical packages: 4
0.062403] smpboot: Total of 4 processors activated (27999.38 BogoMIPS)
0.062403] devtmpfs: initialized
0.062403] x86/mm: Memory block size: 128MB
0.065190] PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes)
0.065190] PM: Registering ACPI NVS region [mem 0x9d3c7000-0x9d78ffff] (3969024 bytes)
0.065190] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
0.065190] futex hash table entries: 4096 (order: 6, 262144 bytes)
0.065190] pinctrl core: initialized pinctrl subsystem
0.065656] NET: Registered protocol family 16
0.065729] audit: initializing netlink subsys (disabled)
0.065732] audit: type=2000 audit(1531756452.064:1): state=initialized audit_enabled=0 res=1
0.065732] cpuidle: using governor ladder
0.065732] cpuidle: using governor menu
0.065732] ACPI: bus type PCI registered
0.065732] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
0.065732] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
0.065732] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
0.065732] PCI: Using configuration type 1 for base access
0.068417] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
0.068417] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
0.068417] ACPI: Added _OSI(Module Device)
0.068417] ACPI: Added _OSI(Processor Device)
0.068417] ACPI: Added _OSI(3.0 _SCP Extensions)
0.068417] ACPI: Added _OSI(Processor Aggregator Device)
0.068498] ACPI BIOS Error (bug): Failure looking up [\PTOS], AE_NOT_FOUND (20180105/psargs-364)
0.068507] ACPI Error: Method parse/execution failed \, AE_NOT_FOUND (20180105/psparse-550)
0.068513] ACPI: Executed 2 blocks of module-level executable AML code
0.071940] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
0.073341] ACPI: Interpreter enabled
0.073351] ACPI: (supports S0 S3 S4 S5)
0.073352] ACPI: Using IOAPIC for interrupt routing
0.073573] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
0.073802] ACPI: Enabled 2 GPEs in block 00 to 1F
0.075599] ACPI: Power Resource [P0ST] (on)
0.075617] ACPI: Power Resource [P3ST] (on)
0.079836] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
0.079839] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
0.079979] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
0.079986] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
0.080223] PCI host bridge to bus 0000:00
0.080224] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
0.080225] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
0.080226] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
0.080227] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
0.080228] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
0.080229] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
0.080230] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
0.080231] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
0.080232] pci_bus 0000:00: root bus resource [bus 00-ff]
0.080241] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
0.080359] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
0.080500] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
0.080601] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
0.080705] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
0.080812] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
0.080913] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
0.080965] pci 0000:00:08.1: enabling Extended Tags
0.081021] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
0.081100] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
0.081151] pci 0000:00:08.2: enabling Extended Tags
0.081201] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
0.081310] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
0.081523] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
0.081699] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
0.081741] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
0.081789] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
0.081831] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
0.081872] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
0.081913] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
0.081962] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
0.082010] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
0.082128] pci 0000:15:00.0: [1022:43bb] type 00 class 0x0c0330
0.082158] pci 0000:15:00.0: reg 0x10: [mem 0xfe8a0000-0xfe8a7fff 64bit]
0.082261] pci 0000:15:00.0: PME# supported from D3hot D3cold
0.082355] pci 0000:15:00.1: [1022:43b7] type 00 class 0x010601
0.082418] pci 0000:15:00.1: reg 0x24: [mem 0xfe880000-0xfe89ffff]
0.082427] pci 0000:15:00.1: reg 0x30: [mem 0xfe800000-0xfe87ffff pref]
0.082479] pci 0000:15:00.1: PME# supported from D3hot D3cold
0.082544] pci 0000:15:00.2: [1022:43b2] type 01 class 0x060400
0.082643] pci 0000:15:00.2: PME# supported from D3hot D3cold
0.096028] pci 0000:00:01.2: PCI bridge to [bus 15-1b]
0.096033] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
0.096037] pci 0000:00:01.2: bridge window [mem 0xfe700000-0xfe8fffff]
0.096135] pci 0000:16:00.0: [1022:43b4] type 01 class 0x060400
0.096254] pci 0000:16:00.0: PME# supported from D3hot D3cold
0.096343] pci 0000:16:01.0: [1022:43b4] type 01 class 0x060400
0.096462] pci 0000:16:01.0: PME# supported from D3hot D3cold
0.096560] pci 0000:16:04.0: [1022:43b4] type 01 class 0x060400
0.096678] pci 0000:16:04.0: PME# supported from D3hot D3cold
0.096787] pci 0000:15:00.2: PCI bridge to [bus 16-1b]
0.096793] pci 0000:15:00.2: bridge window [io 0xf000-0xffff]
0.096797] pci 0000:15:00.2: bridge window [mem 0xfe700000-0xfe7fffff]
0.096850] pci 0000:16:00.0: PCI bridge to [bus 17]
0.096934] pci 0000:18:00.0: [10ec:8168] type 00 class 0x020000
0.096983] pci 0000:18:00.0: reg 0x10: [io 0xf000-0xf0ff]
0.097025] pci 0000:18:00.0: reg 0x18: [mem 0xfe704000-0xfe704fff 64bit]
0.097052] pci 0000:18:00.0: reg 0x20: [mem 0xfe700000-0xfe703fff 64bit]
0.097202] pci 0000:18:00.0: supports D1 D2
0.097203] pci 0000:18:00.0: PME# supported from D0 D1 D2 D3hot D3cold
0.108046] pci 0000:16:01.0: PCI bridge to [bus 18]
0.108054] pci 0000:16:01.0: bridge window [io 0xf000-0xffff]
0.108058] pci 0000:16:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
0.108126] pci 0000:16:04.0: PCI bridge to [bus 1b]
0.108288] pci 0000:38:00.0: [1002:15dd] type 00 class 0x030000
0.108340] pci 0000:38:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
0.108361] pci 0000:38:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
0.108375] pci 0000:38:00.0: reg 0x20: [io 0xe000-0xe0ff]
0.108389] pci 0000:38:00.0: reg 0x24: [mem 0xfe600000-0xfe67ffff]
0.108412] pci 0000:38:00.0: enabling Extended Tags
0.108429] pci 0000:38:00.0: BAR 0: assigned to efifb
0.108536] pci 0000:38:00.0: PME# supported from D1 D2 D3hot D3cold
0.108668] pci 0000:38:00.1: [1002:15de] type 00 class 0x040300
0.108702] pci 0000:38:00.1: reg 0x10: [mem 0xfe688000-0xfe68bfff]
0.108785] pci 0000:38:00.1: enabling Extended Tags
0.108865] pci 0000:38:00.1: PME# supported from D1 D2 D3hot D3cold
0.108952] pci 0000:38:00.2: [1022:15df] type 00 class 0x108000
0.109009] pci 0000:38:00.2: reg 0x18: [mem 0xfe500000-0xfe5fffff]
0.109047] pci 0000:38:00.2: reg 0x24: [mem 0xfe68c000-0xfe68dfff]
0.109070] pci 0000:38:00.2: enabling Extended Tags
0.109232] pci 0000:38:00.3: [1022:15e0] type 00 class 0x0c0330
0.109272] pci 0000:38:00.3: reg 0x10: [mem 0xfe400000-0xfe4fffff 64bit]
0.109343] pci 0000:38:00.3: enabling Extended Tags
0.109431] pci 0000:38:00.3: PME# supported from D0 D3hot D3cold
0.109521] pci 0000:38:00.4: [1022:15e1] type 00 class 0x0c0330
0.109561] pci 0000:38:00.4: reg 0x10: [mem 0xfe300000-0xfe3fffff 64bit]
0.109632] pci 0000:38:00.4: enabling Extended Tags
0.109720] pci 0000:38:00.4: PME# supported from D0 D3hot D3cold
0.109811] pci 0000:38:00.6: [1022:15e3] type 00 class 0x040300
0.109844] pci 0000:38:00.6: reg 0x10: [mem 0xfe680000-0xfe687fff]
0.109927] pci 0000:38:00.6: enabling Extended Tags
0.110007] pci 0000:38:00.6: PME# supported from D0 D3hot D3cold
0.110182] pci 0000:00:08.1: PCI bridge to [bus 38]
0.110188] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
0.110192] pci 0000:00:08.1: bridge window [mem 0xfe300000-0xfe6fffff]
0.110198] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
0.110295] pci 0000:39:00.0: [1022:7901] type 00 class 0x010601
0.110391] pci 0000:39:00.0: reg 0x24: [mem 0xfe900000-0xfe9007ff]
0.110414] pci 0000:39:00.0: enabling Extended Tags
0.110499] pci 0000:39:00.0: PME# supported from D3hot D3cold
0.110625] pci 0000:00:08.2: PCI bridge to [bus 39]
0.110634] pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff]
0.111129] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
0.111178] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
0.111218] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
0.111272] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
0.111319] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
0.111357] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
0.111395] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
0.111433] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
0.112019] pci 0000:38:00.0: vgaarb: setting as boot VGA device
0.112021] pci 0000:38:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
0.112023] pci 0000:38:00.0: vgaarb: bridge control possible
0.112023] vgaarb: loaded
0.112023] pps_core: LinuxPPS API ver. 1 registered
0.112023] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
0.112023] PTP clock support registered
0.112023] EDAC MC: Ver: 3.0.0
0.112127] Registered efivars operations
0.134841] PCI: Using ACPI for IRQ routing
0.136518] PCI: pci_cache_line_size set to 64 bytes
0.136596] e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
0.136597] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
0.136597] e820: reserve RAM buffer [mem 0x9d1e5000-0x9fffffff]
0.136598] e820: reserve RAM buffer [mem 0x9d3c7000-0x9fffffff]
0.136598] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
0.136599] e820: reserve RAM buffer [mem 0x41f340000-0x41fffffff]
0.136711] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
0.136711] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
0.140018] clocksource: Switched to clocksource tsc-early
0.149534] VFS: Disk quotas dquot_6.6.0
0.149574] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
0.149722] AppArmor: AppArmor Filesystem Enabled
0.149734] pnp: PnP ACPI init
0.149876] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
0.149880] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
0.149937] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
0.149940] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
0.150021] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
0.150150] system 00:03: [io 0x0a00-0x0a0f] has been reserved
0.150151] system 00:03: [io 0x0a10-0x0a1f] has been reserved
0.150152] system 00:03: [io 0x0a20-0x0a2f] has been reserved
0.150153] system 00:03: [io 0x0a40-0x0a4f] has been reserved
0.150155] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
0.150392] pnp 00:04: [dma 0 disabled]
0.150466] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
0.150660] pnp 00:05: [dma 0 disabled]
0.150694] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
0.150843] system 00:06: [io 0x04d0-0x04d1] has been reserved
0.150844] system 00:06: [io 0x040b] has been reserved
0.150845] system 00:06: [io 0x04d6] has been reserved
0.150846] system 00:06: [io 0x0c00-0x0c01] has been reserved
0.150847] system 00:06: [io 0x0c14] has been reserved
0.150848] system 00:06: [io 0x0c50-0x0c51] has been reserved
0.150849] system 00:06: [io 0x0c52] has been reserved
0.150850] system 00:06: [io 0x0c6c] has been reserved
0.150850] system 00:06: [io 0x0c6f] has been reserved
0.150851] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
0.150852] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
0.150853] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
0.150854] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
0.150855] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
0.150856] system 00:06: [io 0x0800-0x089f] has been reserved
0.150857] system 00:06: [io 0x0b00-0x0b0f] has been reserved
0.150858] system 00:06: [io 0x0b20-0x0b3f] has been reserved
0.150859] system 00:06: [io 0x0900-0x090f] has been reserved
0.150859] system 00:06: [io 0x0910-0x091f] has been reserved
0.150861] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
0.150862] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
0.150863] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
0.150864] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
0.150865] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
0.150866] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
0.150867] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
0.150870] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
0.151154] pnp: PnP ACPI: found 7 devices
0.157004] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
0.157069] pci 0000:16:00.0: PCI bridge to [bus 17]
0.157083] pci 0000:16:01.0: PCI bridge to [bus 18]
0.157086] pci 0000:16:01.0: bridge window [io 0xf000-0xffff]
0.157090] pci 0000:16:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
0.157099] pci 0000:16:04.0: PCI bridge to [bus 1b]
0.157111] pci 0000:15:00.2: PCI bridge to [bus 16-1b]
0.157113] pci 0000:15:00.2: bridge window [io 0xf000-0xffff]
0.157118] pci 0000:15:00.2: bridge window [mem 0xfe700000-0xfe7fffff]
0.157126] pci 0000:00:01.2: PCI bridge to [bus 15-1b]
0.157127] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
0.157132] pci 0000:00:01.2: bridge window [mem 0xfe700000-0xfe8fffff]
0.157141] pci 0000:00:08.1: PCI bridge to [bus 38]
0.157143] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
0.157147] pci 0000:00:08.1: bridge window [mem 0xfe300000-0xfe6fffff]
0.157150] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
0.157156] pci 0000:00:08.2: PCI bridge to [bus 39]
0.157161] pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff]
0.157170] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
0.157171] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
0.157172] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
0.157173] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
0.157173] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
0.157174] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
0.157175] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
0.157176] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
0.157177] pci_bus 0000:15: resource 0 [io 0xf000-0xffff]
0.157178] pci_bus 0000:15: resource 1 [mem 0xfe700000-0xfe8fffff]
0.157179] pci_bus 0000:16: resource 0 [io 0xf000-0xffff]
0.157180] pci_bus 0000:16: resource 1 [mem 0xfe700000-0xfe7fffff]
0.157181] pci_bus 0000:18: resource 0 [io 0xf000-0xffff]
0.157182] pci_bus 0000:18: resource 1 [mem 0xfe700000-0xfe7fffff]
0.157183] pci_bus 0000:38: resource 0 [io 0xe000-0xefff]
0.157184] pci_bus 0000:38: resource 1 [mem 0xfe300000-0xfe6fffff]
0.157184] pci_bus 0000:38: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
0.157185] pci_bus 0000:39: resource 1 [mem 0xfe900000-0xfe9fffff]
0.157367] NET: Registered protocol family 2
0.157600] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
0.157641] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
0.157812] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
0.157938] TCP: Hash tables configured (established 131072 bind 65536)
0.157979] UDP hash table entries: 8192 (order: 6, 262144 bytes)
0.158015] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
0.158115] NET: Registered protocol family 1
0.158279] pci 0000:38:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
0.158481] PCI: CLS 64 bytes, default 64
0.158508] Unpacking initramfs...
0.464750] Freeing initrd memory: 25356K
0.464857] AMD-Vi: Unable to write to IOMMU perf counter.
0.464953] pci 0000:00:00.2: can't derive routing for PCI INT A
0.464954] pci 0000:00:00.2: PCI INT A: not connected
0.465381] iommu: Adding device 0000:00:01.0 to group 0
0.465582] iommu: Adding device 0000:00:01.2 to group 1
0.465780] iommu: Adding device 0000:00:08.0 to group 2
0.465992] iommu: Adding device 0000:00:08.1 to group 3
0.466011] iommu: Adding device 0000:00:08.2 to group 2
0.466197] iommu: Adding device 0000:00:14.0 to group 4
0.466211] iommu: Adding device 0000:00:14.3 to group 4
0.466415] iommu: Adding device 0000:00:18.0 to group 5
0.466430] iommu: Adding device 0000:00:18.1 to group 5
0.466451] iommu: Adding device 0000:00:18.2 to group 5
0.466465] iommu: Adding device 0000:00:18.3 to group 5
0.466479] iommu: Adding device 0000:00:18.4 to group 5
0.466494] iommu: Adding device 0000:00:18.5 to group 5
0.466506] iommu: Adding device 0000:00:18.6 to group 5
0.466519] iommu: Adding device 0000:00:18.7 to group 5
0.466719] iommu: Adding device 0000:15:00.0 to group 6
0.466756] iommu: Adding device 0000:15:00.1 to group 6
0.466795] iommu: Adding device 0000:15:00.2 to group 6
0.466811] iommu: Adding device 0000:16:00.0 to group 6
0.466826] iommu: Adding device 0000:16:01.0 to group 6
0.466842] iommu: Adding device 0000:16:04.0 to group 6
0.466867] iommu: Adding device 0000:18:00.0 to group 6
0.467141] iommu: Adding device 0000:38:00.0 to group 7
0.467219] iommu: Using direct mapping for device 0000:38:00.0
0.467310] iommu: Adding device 0000:38:00.1 to group 8
0.467344] iommu: Adding device 0000:38:00.2 to group 8
0.467377] iommu: Adding device 0000:38:00.3 to group 8
0.467410] iommu: Adding device 0000:38:00.4 to group 8
0.467443] iommu: Adding device 0000:38:00.6 to group 8
0.467459] iommu: Adding device 0000:39:00.0 to group 2
0.467713] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
0.467713] AMD-Vi: Extended features (0x4f77ef22294ada):
0.467714] PPR NX GT IA GA PC GA_vAPIC
0.467716] AMD-Vi: Interrupt remapping enabled
0.467716] AMD-Vi: virtual APIC enabled
0.513300] AMD-Vi: Lazy IO/TLB flushing enabled
0.514126] amd_uncore: AMD NB counters detected
0.514130] amd_uncore: AMD LLC counters detected
0.515039] Initialise system trusted keyrings
0.515354] workingset: timestamp_bits=40 max_order=22 bucket_order=0
0.517070] zbud: loaded
0.698421] Key type asymmetric registered
0.698422] Asymmetric key parser 'x509' registered
0.698483] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
0.698550] io scheduler noop registered
0.698551] io scheduler deadline registered
0.698652] io scheduler cfq registered (default)
0.698653] io scheduler mq-deadline registered
0.699951] pcieport 0000:00:01.2: AER enabled with IRQ 26
0.699965] pcieport 0000:00:01.2: Signaling PME with IRQ 26
0.699989] pcieport 0000:00:08.1: Signaling PME with IRQ 27
0.700012] pcieport 0000:00:08.2: Signaling PME with IRQ 28
0.700042] efifb: probing for efifb
0.700052] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
0.700053] efifb: mode is 1024x768x32, linelength=4096, pages=1
0.700053] efifb: scrolling: redraw
0.700055] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
0.701670] Console: switching to colour frame buffer device 128x48
0.703195] fb0: EFI VGA frame buffer device
0.703459] Monitor-Mwait will be used to enter C-1 state
0.703986] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
0.724894] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
0.725213] Linux agpgart interface v0.103
0.725466] AMD IOMMUv2 driver by Joerg Roedel <jroedel@xxxxxxx>
0.725950] i8042: PNP: No PS/2 controller found.
0.726002] mousedev: PS/2 mouse device common for all mice
0.726056] rtc_cmos 00:02: RTC can wake from S4
0.726249] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
0.726309] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
0.726727] ledtrig-cpu: registered to indicate activity on CPUs
0.727312] NET: Registered protocol family 10
0.730569] Segment Routing with IPv6
0.730594] mip6: Mobile IPv6
0.730596] NET: Registered protocol family 17
0.730599] mpls_gso: MPLS GSO support
0.730993] microcode: CPU0: patch_level=0x0810100b
0.730997] microcode: CPU1: patch_level=0x0810100b
0.731001] microcode: CPU2: patch_level=0x0810100b
0.731005] microcode: CPU3: patch_level=0x0810100b
0.731036] microcode: Microcode Update Driver: v2.2.
0.731056] sched_clock: Marking stable (731032254, 0)->(817038994, -86006740)
0.731210] registered taskstats version 1
0.731210] Loading compiled-in X.509 certificates
0.754307] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
0.754540] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
0.754558] zswap: loaded using pool lzo/zbud
0.754754] AppArmor: AppArmor sha1 policy hashing enabled
0.755490] rtc_cmos 00:02: setting system clock to 2018-07-16 15:54:14 UTC (1531756454)
1.029792] Freeing unused kernel memory: 1524K
1.029794] Write protecting the kernel read-only data: 16384k
1.031977] Freeing unused kernel memory: 2024K
1.033917] Freeing unused kernel memory: 960K
1.038356] x86/mm: Checked W+X mappings: passed, no W+X pages found.
1.090067] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
1.091632] ACPI: bus type USB registered
1.091646] usbcore: registered new interface driver usbfs
1.091650] usbcore: registered new interface driver hub
1.091963] usbcore: registered new device driver usb
1.092632] SCSI subsystem initialized
1.095060] cryptd: max_cpu_qlen set to 1000
1.095150] xhci_hcd 0000:15:00.0: xHCI Host Controller
1.095155] xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 1
1.095574] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
1.095575] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
1.096200] libata version 3.00 loaded.
1.098274] AVX2 version of gcm_enc/dec engaged.
1.098274] AES CTR mode by8 optimization enabled
1.101119] r8169 0000:18:00.0 eth0: RTL8168h/8111h at 0x (ptrval), 30:9c:23:04:d6:98, XID 14100800 IRQ 36
1.101121] r8169 0000:18:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
1.105770] r8169 0000:18:00.0 enp24s0: renamed from eth0
1.142265] alg: No test for pcbc(aes) (pcbc-aes-aesni)
1.150549] xhci_hcd 0000:15:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x48000410
1.150731] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
1.150732] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.150733] usb usb1: Product: xHCI Host Controller
1.150734] usb usb1: Manufacturer: Linux 4.16.0-2-amd64 xhci-hcd
1.150734] usb usb1: SerialNumber: 0000:15:00.0
1.150825] hub 1-0:1.0: USB hub found
1.150841] hub 1-0:1.0: 10 ports detected
1.151222] xhci_hcd 0000:15:00.0: xHCI Host Controller
1.151224] xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 2
1.151226] xhci_hcd 0000:15:00.0: Host supports USB 3.10 Enhanced SuperSpeed
1.151250] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
1.151261] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
1.151262] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.151263] usb usb2: Product: xHCI Host Controller
1.151264] usb usb2: Manufacturer: Linux 4.16.0-2-amd64 xhci-hcd
1.151264] usb usb2: SerialNumber: 0000:15:00.0
1.151332] hub 2-0:1.0: USB hub found
1.151340] hub 2-0:1.0: 4 ports detected
1.151479] ahci 0000:15:00.1: version 3.0
1.151574] xhci_hcd 0000:38:00.3: xHCI Host Controller
1.151576] xhci_hcd 0000:38:00.3: new USB bus registered, assigned bus number 3
1.151681] ahci 0000:15:00.1: SSS flag set, parallel bus scan disabled
1.151732] ahci 0000:15:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
1.151735] ahci 0000:15:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
1.151763] xhci_hcd 0000:38:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x40000410
1.152186] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
1.152187] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.152188] usb usb3: Product: xHCI Host Controller
1.152189] usb usb3: Manufacturer: Linux 4.16.0-2-amd64 xhci-hcd
1.152189] usb usb3: SerialNumber: 0000:38:00.3
1.152278] hub 3-0:1.0: USB hub found
1.152291] hub 3-0:1.0: 4 ports detected
1.152601] scsi host0: ahci
1.152609] xhci_hcd 0000:38:00.3: xHCI Host Controller
1.152611] xhci_hcd 0000:38:00.3: new USB bus registered, assigned bus number 4
1.152613] xhci_hcd 0000:38:00.3: Host supports USB 3.10 Enhanced SuperSpeed
1.152643] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
1.152654] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
1.152655] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.152655] usb usb4: Product: xHCI Host Controller
1.152656] usb usb4: Manufacturer: Linux 4.16.0-2-amd64 xhci-hcd
1.152657] usb usb4: SerialNumber: 0000:38:00.3
1.152741] hub 4-0:1.0: USB hub found
1.152754] hub 4-0:1.0: 4 ports detected
1.152808] scsi host1: ahci
1.152953] scsi host2: ahci
1.152971] xhci_hcd 0000:38:00.4: xHCI Host Controller
1.152974] xhci_hcd 0000:38:00.4: new USB bus registered, assigned bus number 5
1.153104] scsi host3: ahci
1.153152] xhci_hcd 0000:38:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x40000410
1.153215] scsi host4: ahci
1.153311] scsi host5: ahci
1.153414] scsi host6: ahci
1.153527] scsi host7: ahci
1.153558] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
1.153559] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.153559] usb usb5: Product: xHCI Host Controller
1.153560] usb usb5: Manufacturer: Linux 4.16.0-2-amd64 xhci-hcd
1.153561] usb usb5: SerialNumber: 0000:38:00.4
1.153575] ata1: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880100 irq 39
1.153578] ata2: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880180 irq 39
1.153578] ata3: DUMMY
1.153579] ata4: DUMMY
1.153581] ata5: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880300 irq 39
1.153583] ata6: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880380 irq 39
1.153584] ata7: DUMMY
1.153584] ata8: DUMMY
1.153644] hub 5-0:1.0: USB hub found
1.153655] hub 5-0:1.0: 1 port detected
1.153728] xhci_hcd 0000:38:00.4: xHCI Host Controller
1.153740] xhci_hcd 0000:38:00.4: new USB bus registered, assigned bus number 6
1.153742] xhci_hcd 0000:38:00.4: Host supports USB 3.10 Enhanced SuperSpeed
1.153766] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
1.153776] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
1.153777] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.153777] usb usb6: Product: xHCI Host Controller
1.153778] usb usb6: Manufacturer: Linux 4.16.0-2-amd64 xhci-hcd
1.153779] usb usb6: SerialNumber: 0000:38:00.4
1.153808] ahci 0000:39:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
1.153810] ahci 0000:39:00.0: flags: 64bit ncq sntf ilck led clo only pmp fbs pio
1.153862] hub 6-0:1.0: USB hub found
1.153866] hub 6-0:1.0: 1 port detected
1.154817] scsi host8: ahci
1.154887] ata9: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900100 irq 52
1.466406] ata1: SATA link down (SStatus 0 SControl 300)
1.484356] usb 1-10: new low-speed USB device number 2 using xhci_hcd
1.488444] usb 5-1: new low-speed USB device number 2 using xhci_hcd
1.512198] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
1.532353] tsc: Refined TSC clocksource calibration: 3503.043 MHz
1.532366] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x327e8c14376, max_idle_ns: 440795362368 ns
1.532408] clocksource: Switched to clocksource tsc
1.533114] usb 4-2: New USB device found, idVendor=0781, idProduct=558b
1.533116] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1.533117] usb 4-2: Product: Extreme
1.533118] usb 4-2: Manufacturer: SanDisk
1.533119] usb 4-2: SerialNumber: 4C530001051117121354
1.535046] usb-storage 4-2:1.0: USB Mass Storage device detected
1.535157] scsi host9: usb-storage 4-2:1.0
1.535228] usbcore: registered new interface driver usb-storage
1.535651] usbcore: registered new interface driver uas
1.632037] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
1.632892] ata9.00: supports DRM functions and may not be fully accessible
1.632924] ata9.00: ATA-10: CT1000MX500SSD4, M3CR020, max UDMA/133
1.632925] ata9.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
1.633097] ata9.00: READ LOG DMA EXT failed, trying PIO
1.633098] ata9.00: failed to get Identify Device Data, Emask 0x40
1.633099] ata9.00: ATA Identify Device Log not supported
1.633099] ata9.00: Security Log not supported
1.633102] ata9.00: failed to set xfermode (err_mask=0x40)
1.652760] usb 5-1: New USB device found, idVendor=413c, idProduct=3012
1.652763] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
1.652765] usb 5-1: Product: Dell USB Optical Mouse
1.652767] usb 5-1: Manufacturer: Dell
1.661166] hidraw: raw HID events driver (C) Jiri Kosina
1.665783] usbcore: registered new interface driver usbhid
1.665784] usbhid: USB HID core driver
1.666409] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:08.1/0000:38:00.4/usb5/5-1/5-1:1.0/0003:413C:3012.0001/input/input0
1.666466] hid-generic 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:38:00.4-1/input0
1.776415] usb 1-10: New USB device found, idVendor=413c, idProduct=2105
1.776418] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
1.776421] usb 1-10: Product: Dell USB Keyboard
1.776423] usb 1-10: Manufacturer: Dell
1.778239] ata2: SATA link down (SStatus 0 SControl 300)
1.838433] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-10/1-10:1.0/0003:413C:2105.0002/input/input1
1.896375] hid-generic 0003:413C:2105.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:15:00.0-10/input0
2.090204] ata5: SATA link down (SStatus 0 SControl 300)
2.403934] ata6: SATA link down (SStatus 0 SControl 300)
2.556742] scsi 9:0:0:0: Direct-Access SanDisk Extreme 1.00 PQ: 0 ANSI: 6
2.558766] sd 9:0:0:0: [sda] 122552320 512-byte logical blocks: (62.7 GB/58.4 GiB)
2.558977] sd 9:0:0:0: [sda] Write Protect is off
2.558978] sd 9:0:0:0: [sda] Mode Sense: 43 00 00 00
2.559188] sd 9:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
2.560794] sda: sda1 sda2 sda3
2.561677] sd 9:0:0:0: [sda] Attached SCSI removable disk
7.352246] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
7.353434] ata9.00: supports DRM functions and may not be fully accessible
7.354196] ata9.00: supports DRM functions and may not be fully accessible
7.354772] ata9.00: configured for UDMA/133
7.354975] scsi 8:0:0:0: Direct-Access ATA CT1000MX500SSD4 020 PQ: 0 ANSI: 5
7.355681] sd 8:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
7.355684] sd 8:0:0:0: [sdb] 4096-byte physical blocks
7.355701] sd 8:0:0:0: [sdb] Write Protect is off
7.355702] sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
7.355724] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
7.356418] sdb: sdb1 sdb2 sdb3
7.356898] sd 8:0:0:0: [sdb] supports TCG Opal
7.356899] sd 8:0:0:0: [sdb] Attached SCSI disk
7.366336] random: fast init done
7.532012] raid6: sse2x1 gen() 8266 MB/s
7.600241] raid6: sse2x1 xor() 7837 MB/s
7.668236] raid6: sse2x2 gen() 16930 MB/s
7.736273] raid6: sse2x2 xor() 10622 MB/s
7.804250] raid6: sse2x4 gen() 17195 MB/s
7.872247] raid6: sse2x4 xor() 9737 MB/s
7.940243] raid6: avx2x1 gen() 18789 MB/s
8.008250] raid6: avx2x1 xor() 14060 MB/s
8.076385] raid6: avx2x2 gen() 23689 MB/s
8.144022] raid6: avx2x2 xor() 14973 MB/s
8.212020] raid6: avx2x4 gen() 24521 MB/s
8.280244] raid6: avx2x4 xor() 13535 MB/s
8.280244] raid6: using algorithm avx2x4 gen() 24521 MB/s
8.280244] raid6: .... xor() 13535 MB/s, rmw enabled
8.280245] raid6: using avx2x2 recovery algorithm
8.280690] xor: automatically using best checksumming function avx
8.280981] async_tx: api initialized (async)
8.294920] device-mapper: uevent: version 1.0.3
8.295021] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@xxxxxxxxxx
16.231577] NET: Registered protocol family 38
18.161440] random: crng init done
25.066611] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
25.362715] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
25.435572] acpi_cpufreq: overriding BIOS provided _PSD data
25.438414] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
25.438422] ACPI: Power Button [PWRB]
25.438471] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
25.438530] ACPI: Power Button [PWRF]
25.468856] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
25.469261] parport_pc 00:04: reported by Plug and Play ACPI
25.469403] parport0: PC-style at 0x378, irq 5 [PCSPP]
25.489094] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
25.489157] sp5100-tco sp5100-tco: I/O address 0x0cd6 already in use
25.489180] sp5100-tco: probe of sp5100-tco failed with error -16
25.492241] sd 9:0:0:0: Attached scsi generic sg0 type 0
25.492275] sd 8:0:0:0: Attached scsi generic sg1 type 0
25.520187] input: PC Speaker as /devices/platform/pcspkr/input/input4
25.521959] EFI Variables Facility v0.08 2004-May-17
25.526279] snd_hda_intel 0000:38:00.1: Handle vga_switcheroo audio client
25.551075] kvm: disabled by bios
25.557356] MCE: In-kernel MCE decoding enabled.
25.563048] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input5
25.563148] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input6
25.563186] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input7
25.563222] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input8
25.563250] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input9
25.563288] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input10
25.592485] EDAC amd64: Node 0: DRAM ECC disabled.
25.592487] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
25.592487] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
25.592487] (Note that use of the override may cause unknown side effects.)
25.592927] pstore: using zlib compression
25.592944] pstore: Registered efi as persistent store backend
25.594395] [drm] amdgpu kernel modesetting enabled.
25.601273] ppdev: user-space parallel port driver
25.605730] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
25.605732] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
25.605733] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
25.605734] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
25.605734] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
25.605735] snd_hda_codec_realtek hdaudioC1D0: inputs:
25.605736] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
25.605737] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
25.605738] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
25.622849] Parsing CRAT table with 1 nodes
25.622852] Creating topology SYSFS entries
25.622876] Topology: Add APU node [0x0:0x0]
25.622877] Finished initializing topology
25.622895] kfd kfd: Initialized module
25.627825] checking generic (e0000000 300000) vs hw (e0000000 10000000)
25.627826] fb: switching to amdgpudrmfb from EFI VGA
25.627843] Console: switching to colour dummy device 80x25
25.628920] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1002:0x15DD 0xC8).
25.628931] [drm] register mmio base: 0xFE600000
25.628931] [drm] register mmio size: 524288
25.629928] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_gpu_info.bin
25.629934] [drm] probing gen 2 caps for device 1022:15db = 700d03/e
25.629936] [drm] probing mlw for device 1022:15db = 700d03
25.630042] [drm] VCN decode is enabled in VM mode
25.630043] [drm] VCN encode is enabled in VM mode
25.638966] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input11
25.639011] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input12
25.639043] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input13
25.639086] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input14
25.639124] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input15
25.639161] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input16
25.639192] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input17
25.652026] [drm] BIOS signature incorrect 0 0
25.652058] ATOM BIOS: 113-RAVEN-106
25.652096] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
25.652107] amdgpu 0000:38:00.0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used)
25.652109] amdgpu 0000:38:00.0: GTT: 1024M 0x000000F500000000 - 0x000000F53FFFFFFF
25.652113] [drm] Detected VRAM RAM=1024M, BAR=256M
25.652114] [drm] RAM width 128bits UNKNOWN
25.652170] [TTM] Zone kernel: Available graphics memory: 7703370 kiB
25.652171] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
25.652171] [TTM] Initializing pool allocator
25.652174] [TTM] Initializing DMA pool allocator
25.652202] [drm] amdgpu: 1024M of VRAM memory ready
25.652203] [drm] amdgpu: 3072M of GTT memory ready.
25.652220] [drm] GART: num cpu pages 262144, num gpu pages 262144
25.652433] [drm] PCIE GART of 1024M enabled (table at 0x000000F400800000).
25.652541] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
25.652541] [drm] Driver supports precise vblank timestamp query.
25.652983] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_asd.bin
25.653276] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_pfp.bin
25.653498] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_me.bin
25.653668] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_ce.bin
25.653960] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_rlc.bin
25.654817] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_mec.bin
25.656137] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_mec2.bin
25.658217] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_sdma.bin
25.658220] [drm] use_doorbell being set to: [true]
25.659663] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_vcn.bin
25.659667] [drm] Found VCN firmware Version: 1.73 Family ID: 18
25.847424] [drm] VCN decode and encode initialized successfully.
25.852189] amdgpu 0000:38:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0
25.852191] amdgpu 0000:38:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0
25.852193] amdgpu 0000:38:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0
25.852194] amdgpu 0000:38:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0
25.852195] amdgpu 0000:38:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0
25.852197] amdgpu 0000:38:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0
25.852198] amdgpu 0000:38:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0
25.852200] amdgpu 0000:38:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0
25.852201] amdgpu 0000:38:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0
25.852202] amdgpu 0000:38:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0
25.852204] amdgpu 0000:38:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1
25.852205] amdgpu 0000:38:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1
25.852207] amdgpu 0000:38:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1
25.852208] amdgpu 0000:38:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1
25.856580] [drm] Initialized amdgpu 3.23.0 20150101 for 0000:38:00.0 on minor 0
0.000000] Linux version 4.16.0-2-amd64 (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 7.3.0 (Debian 7.3.0-23)) #1 SMP Debian 4.16.16-2 (2018-06-22)
0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.16.0-2-amd64 root=UUID=313f78e2-468f-4660-b236-d1de214bf6b4 ro nomodeset
0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
0.000000] e820: BIOS-provided physical RAM map:
0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
0.000000] BIOS-e820: [mem 0x000000000400a000-0x0000000009d7ffff] usable
0.000000] BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
0.000000] BIOS-e820: [mem 0x000000000b020000-0x000000009d1e4fff] usable
0.000000] BIOS-e820: [mem 0x000000009d1e5000-0x000000009d2d4fff] reserved
0.000000] BIOS-e820: [mem 0x000000009d2d5000-0x000000009d3c6fff] usable
0.000000] BIOS-e820: [mem 0x000000009d3c7000-0x000000009d78ffff] ACPI NVS
0.000000] BIOS-e820: [mem 0x000000009d790000-0x000000009e5bffff] reserved
0.000000] BIOS-e820: [mem 0x000000009e5c0000-0x000000009e664fff] type 20
0.000000] BIOS-e820: [mem 0x000000009e665000-0x000000009effffff] usable
0.000000] BIOS-e820: [mem 0x000000009f000000-0x00000000dfffffff] reserved
0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
0.000000] BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved
0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f33ffff] usable
0.000000] NX (Execute Disable) protection: active
0.000000] efi: EFI v2.60 by American Megatrends
0.000000] efi: ACPI 2.0=0x9d3c7000 ACPI=0x9d3c7000 SMBIOS=0x9e48d000 ESRT=0x98880f98 MEMATTR=0x97a58018
0.000000] secureboot: Secure boot could not be determined (mode 0)
0.000000] SMBIOS 2.8 present.
0.000000] DMI: MSI MS-7A37/B350M MORTAR (MS-7A37), BIOS 1.F0 04/27/2018
0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
0.000000] e820: last_pfn = 0x41f340 max_arch_pfn = 0x400000000
0.000000] MTRR default type: uncachable
0.000000] MTRR fixed ranges enabled:
0.000000] 00000-9FFFF write-back
0.000000] A0000-BFFFF write-through
0.000000] C0000-FFFFF write-protect
0.000000] MTRR variable ranges enabled:
0.000000] 0 base 000000000000 mask FFFF80000000 write-back
0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
0.000000] 3 disabled
0.000000] 4 disabled
0.000000] 5 disabled
0.000000] 6 disabled
0.000000] 7 disabled
0.000000] TOM2: 0000000420000000 aka 16896M
0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
0.000000] e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
0.000000] esrt: Reserving ESRT space from 0x0000000098880f98 to 0x0000000098880fd0.
0.000000] Base memory trampoline at [ (ptrval)] 96000 size 24576
0.000000] Using GB pages for direct mapping
0.000000] BRK [0x6222c000, 0x6222cfff] PGTABLE
0.000000] BRK [0x6222d000, 0x6222dfff] PGTABLE
0.000000] BRK [0x6222e000, 0x6222efff] PGTABLE
0.000000] BRK [0x6222f000, 0x6222ffff] PGTABLE
0.000000] BRK [0x62230000, 0x62230fff] PGTABLE
0.000000] BRK [0x62231000, 0x62231fff] PGTABLE
0.000000] BRK [0x62232000, 0x62232fff] PGTABLE
0.000000] BRK [0x62233000, 0x62233fff] PGTABLE
0.000000] BRK [0x62234000, 0x62234fff] PGTABLE
0.000000] BRK [0x62235000, 0x62235fff] PGTABLE
0.000000] RAMDISK: [mem 0x34e69000-0x3672bfff]
0.000000] ACPI: Early table checksum verification disabled
0.000000] ACPI: RSDP 0x000000009D3C7000 000024 (v02 ALASKA)
0.000000] ACPI: XSDT 0x000000009D3C70A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
0.000000] ACPI: FACP 0x000000009D3CE8B8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180105/tbfadt-658)
0.000000] ACPI: DSDT 0x000000009D3C71F0 0076C7 (v02 ALASKA A M I 01072009 INTL 20120913)
0.000000] ACPI: FACS 0x000000009D779E00 000040
0.000000] ACPI: APIC 0x000000009D3CE9D0 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
0.000000] ACPI: FPDT 0x000000009D3CEAB0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
0.000000] ACPI: FIDT 0x000000009D3CEAF8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
0.000000] ACPI: SSDT 0x000000009D3CEB98 005367 (v02 AMD AmdTable 00000002 MSFT 02000002)
0.000000] ACPI: SSDT 0x000000009D3D3F00 0007DC (v01 AMD AMD CPU 00000001 AMD 00000001)
0.000000] ACPI: CRAT 0x000000009D3D46E0 000810 (v01 AMD AMD CRAT 00000001 AMD 00000001)
0.000000] ACPI: CDIT 0x000000009D3D4EF0 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
0.000000] ACPI: SSDT 0x000000009D3D4F20 002D89 (v01 AMD AMD AOD 00000001 INTL 20120913)
0.000000] ACPI: MCFG 0x000000009D3D7CB0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
0.000000] ACPI: HPET 0x000000009D3D7CF0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
0.000000] ACPI: UEFI 0x000000009D3D7D28 000042 (v01 00000000 00000000)
0.000000] ACPI: IVRS 0x000000009D3D7D70 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
0.000000] ACPI: BGRT 0x000000009D3D7E40 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
0.000000] ACPI: SSDT 0x000000009D3D7E78 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
0.000000] ACPI: SSDT 0x000000009D3D7F70 000E96 (v01 AMD AmdTable 00000001 INTL 20120913)
0.000000] ACPI: SSDT 0x000000009D3D8E08 000850 (v01 AMD AmdTable 00000001 INTL 20120913)
0.000000] ACPI: SSDT 0x000000009D3D9658 001A41 (v01 AMD AmdTable 00000001 INTL 20120913)
0.000000] ACPI: WSMT 0x000000009D3DB0A0 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] No NUMA configuration found
0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f33ffff]
0.000000] NODE_DATA(0) allocated [mem 0x41f33b000-0x41f33ffff]
0.000000] tsc: Fast TSC calibration failed
0.000000] tsc: Using PIT calibration value
0.000000] Zone ranges:
0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
0.000000] Normal [mem 0x0000000100000000-0x000000041f33ffff]
0.000000] Device empty
0.000000] Movable zone start for each node
0.000000] Early memory node ranges
0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
0.000000] node 0: [mem 0x0000000000100000-0x0000000003ffffff]
0.000000] node 0: [mem 0x000000000400a000-0x0000000009d7ffff]
0.000000] node 0: [mem 0x000000000a000000-0x000000000affffff]
0.000000] node 0: [mem 0x000000000b020000-0x000000009d1e4fff]
0.000000] node 0: [mem 0x000000009d2d5000-0x000000009d3c6fff]
0.000000] node 0: [mem 0x000000009e665000-0x000000009effffff]
0.000000] node 0: [mem 0x0000000100000000-0x000000041f33ffff]
0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f33ffff]
0.000000] On node 0 totalpages: 3919015
0.000000] DMA zone: 64 pages used for memmap
0.000000] DMA zone: 28 pages reserved
0.000000] DMA zone: 3999 pages, LIFO batch:0
0.000000] DMA32 zone: 10024 pages used for memmap
0.000000] DMA32 zone: 641480 pages, LIFO batch:31
0.000000] Normal zone: 51149 pages used for memmap
0.000000] Normal zone: 3273536 pages, LIFO batch:31
0.000000] Reserved but unavailable: 97 pages
0.000000] ACPI: PM-Timer IO Port: 0x808
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
0.000000] ACPI: IRQ0 used by override.
0.000000] ACPI: IRQ9 used by override.
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
0.000000] PM: Registered nosave memory: [mem 0x04000000-0x04009fff]
0.000000] PM: Registered nosave memory: [mem 0x09d80000-0x09ffffff]
0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
0.000000] PM: Registered nosave memory: [mem 0x9d1e5000-0x9d2d4fff]
0.000000] PM: Registered nosave memory: [mem 0x9d3c7000-0x9d78ffff]
0.000000] PM: Registered nosave memory: [mem 0x9d790000-0x9e5bffff]
0.000000] PM: Registered nosave memory: [mem 0x9e5c0000-0x9e664fff]
0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xdfffffff]
0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfd7fffff]
0.000000] PM: Registered nosave memory: [mem 0xfd800000-0xfdffffff]
0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
0.000000] Booting paravirtualized kernel on bare hardware
0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
0.000000] random: get_random_bytes called from start_kernel+0x94/0x4d3 with crng_init=0
0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
0.000000] percpu: Embedded 44 pages/cpu @ (ptrval) s142296 r8192 d29736 u262144
0.000000] pcpu-alloc: s142296 r8192 d29736 u262144 alloc=1*2097152
0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3857750
0.000000] Policy zone: Normal
0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.16.0-2-amd64 root=UUID=313f78e2-468f-4660-b236-d1de214bf6b4 ro nomodeset
0.000000] Calgary: detecting Calgary via BIOS EBDA area
0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
0.000000] Memory: 15228168K/15676060K available (10252K kernel code, 1182K rwdata, 3136K rodata, 1524K init, 688K bss, 447892K reserved, 0K cma-reserved)
0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
0.000000] ftrace: allocating 29954 entries in 118 pages
0.000000] Hierarchical RCU implementation.
0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
0.000000] NR_IRQS: 33024, nr_irqs: 1096, preallocated irqs: 16
0.000000] Console: colour dummy device 80x25
0.000000] console [tty0] enabled
0.000000] ACPI: Core revision 20180105
0.000000] ACPI BIOS Error (bug): Failure creating [\_SB.SMIC], AE_ALREADY_EXISTS (20180105/dswload-380)
0.000000] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180105/psobject-252)
0.000000] ACPI Error: AE_ALREADY_EXISTS, (SSDT: AMD PT) while loading table (20180105/tbxfload-228)
0.000000] ACPI Error: 1 table load failures, 7 successful (20180105/tbxfload-246)
0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
0.000000] hpet clockevent registered
0.000000] APIC: Switch to symmetric I/O mode setup
0.004000] Switched APIC routing to physical flat.
0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
0.024000] tsc: Fast TSC calibration failed
0.032000] tsc: PIT calibration matches HPET. 1 loops
0.032000] tsc: Detected 3499.996 MHz processor
0.032000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x32734d20948, max_idle_ns: 440795306379 ns
0.032000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6999.99 BogoMIPS (lpj=13999984)
0.032000] pid_max: default: 32768 minimum: 301
0.036046] Security Framework initialized
0.036049] Yama: disabled by default; enable with sysctl kernel.yama.*
0.036119] AppArmor: AppArmor initialized
0.038556] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
0.039783] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
0.039891] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
0.039930] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
0.040320] CPU: Physical Processor ID: 0
0.040322] CPU: Processor Core ID: 0
0.040430] mce: CPU supports 23 MCE banks
0.040447] LVT offset 1 assigned for vector 0xf9
0.040495] LVT offset 2 assigned for vector 0xf4
0.040506] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
0.040507] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
0.040509] Spectre V2 : Mitigation: Full AMD retpoline
0.040511] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
0.040513] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
0.045215] Freeing SMP alternatives memory: 24K
0.052000] smpboot: CPU0: AMD Ryzen 3 2200G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0)
0.052000] Performance Events: Fam17h core perfctr, AMD PMU driver.
0.052000] ... version: 0
0.052000] ... bit width: 48
0.052000] ... generic registers: 6
0.052000] ... value mask: 0000ffffffffffff
0.052000] ... max period: 00007fffffffffff
0.052000] ... fixed-purpose events: 0
0.052000] ... event mask: 000000000000003f
0.052000] Hierarchical SRCU implementation.
0.052000] smp: Bringing up secondary CPUs ...
0.052000] x86: Booting SMP configuration:
0.052000] .... node #0, CPUs: #1
0.052013] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
0.052150] #2 #3
0.058326] smp: Brought up 1 node, 4 CPUs
0.058326] smpboot: Max logical packages: 4
0.058326] smpboot: Total of 4 processors activated (27999.96 BogoMIPS)
0.058326] devtmpfs: initialized
0.058326] x86/mm: Memory block size: 128MB
0.060962] PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes)
0.060962] PM: Registering ACPI NVS region [mem 0x9d3c7000-0x9d78ffff] (3969024 bytes)
0.060962] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
0.060962] futex hash table entries: 4096 (order: 6, 262144 bytes)
0.060962] pinctrl core: initialized pinctrl subsystem
0.061551] NET: Registered protocol family 16
0.061623] audit: initializing netlink subsys (disabled)
0.061628] audit: type=2000 audit(1531756550.060:1): state=initialized audit_enabled=0 res=1
0.061628] cpuidle: using governor ladder
0.061628] cpuidle: using governor menu
0.061628] ACPI: bus type PCI registered
0.061628] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
0.061628] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
0.061628] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
0.061628] PCI: Using configuration type 1 for base access
0.064552] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
0.064552] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
0.064552] ACPI: Added _OSI(Module Device)
0.064552] ACPI: Added _OSI(Processor Device)
0.064552] ACPI: Added _OSI(3.0 _SCP Extensions)
0.064552] ACPI: Added _OSI(Processor Aggregator Device)
0.064552] ACPI BIOS Error (bug): Failure looking up [\PTOS], AE_NOT_FOUND (20180105/psargs-364)
0.064552] ACPI Error: Method parse/execution failed \, AE_NOT_FOUND (20180105/psparse-550)
0.064552] ACPI: Executed 2 blocks of module-level executable AML code
0.068261] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
0.070048] ACPI: Interpreter enabled
0.070063] ACPI: (supports S0 S3 S4 S5)
0.070065] ACPI: Using IOAPIC for interrupt routing
0.070315] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
0.070558] ACPI: Enabled 2 GPEs in block 00 to 1F
0.072341] ACPI: Power Resource [P0ST] (on)
0.072360] ACPI: Power Resource [P3ST] (on)
0.076535] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
0.076540] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
0.076679] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
0.076688] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
0.076921] PCI host bridge to bus 0000:00
0.076924] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
0.076926] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
0.076928] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
0.076930] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
0.076932] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
0.076934] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
0.076937] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
0.076939] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
0.076941] pci_bus 0000:00: root bus resource [bus 00-ff]
0.076951] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
0.077068] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
0.077208] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
0.077312] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
0.077415] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
0.077523] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
0.077624] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
0.077676] pci 0000:00:08.1: enabling Extended Tags
0.077734] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
0.077813] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
0.077863] pci 0000:00:08.2: enabling Extended Tags
0.077915] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
0.078023] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
0.078190] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
0.078369] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
0.078411] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
0.078459] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
0.078501] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
0.078542] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
0.078583] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
0.078631] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
0.078679] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
0.078797] pci 0000:15:00.0: [1022:43bb] type 00 class 0x0c0330
0.078826] pci 0000:15:00.0: reg 0x10: [mem 0xfe8a0000-0xfe8a7fff 64bit]
0.078929] pci 0000:15:00.0: PME# supported from D3hot D3cold
0.079021] pci 0000:15:00.1: [1022:43b7] type 00 class 0x010601
0.079084] pci 0000:15:00.1: reg 0x24: [mem 0xfe880000-0xfe89ffff]
0.079093] pci 0000:15:00.1: reg 0x30: [mem 0xfe800000-0xfe87ffff pref]
0.079145] pci 0000:15:00.1: PME# supported from D3hot D3cold
0.079208] pci 0000:15:00.2: [1022:43b2] type 01 class 0x060400
0.079307] pci 0000:15:00.2: PME# supported from D3hot D3cold
0.092028] pci 0000:00:01.2: PCI bridge to [bus 15-1b]
0.092036] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
0.092039] pci 0000:00:01.2: bridge window [mem 0xfe700000-0xfe8fffff]
0.092136] pci 0000:16:00.0: [1022:43b4] type 01 class 0x060400
0.092255] pci 0000:16:00.0: PME# supported from D3hot D3cold
0.092344] pci 0000:16:01.0: [1022:43b4] type 01 class 0x060400
0.092461] pci 0000:16:01.0: PME# supported from D3hot D3cold
0.092559] pci 0000:16:04.0: [1022:43b4] type 01 class 0x060400
0.092677] pci 0000:16:04.0: PME# supported from D3hot D3cold
0.092802] pci 0000:15:00.2: PCI bridge to [bus 16-1b]
0.092811] pci 0000:15:00.2: bridge window [io 0xf000-0xffff]
0.092815] pci 0000:15:00.2: bridge window [mem 0xfe700000-0xfe7fffff]
0.092876] pci 0000:16:00.0: PCI bridge to [bus 17]
0.092971] pci 0000:18:00.0: [10ec:8168] type 00 class 0x020000
0.093024] pci 0000:18:00.0: reg 0x10: [io 0xf000-0xf0ff]
0.093071] pci 0000:18:00.0: reg 0x18: [mem 0xfe704000-0xfe704fff 64bit]
0.093099] pci 0000:18:00.0: reg 0x20: [mem 0xfe700000-0xfe703fff 64bit]
0.093262] pci 0000:18:00.0: supports D1 D2
0.093263] pci 0000:18:00.0: PME# supported from D0 D1 D2 D3hot D3cold
0.104047] pci 0000:16:01.0: PCI bridge to [bus 18]
0.104056] pci 0000:16:01.0: bridge window [io 0xf000-0xffff]
0.104060] pci 0000:16:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
0.104129] pci 0000:16:04.0: PCI bridge to [bus 1b]
0.104294] pci 0000:38:00.0: [1002:15dd] type 00 class 0x030000
0.104346] pci 0000:38:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
0.104367] pci 0000:38:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
0.104380] pci 0000:38:00.0: reg 0x20: [io 0xe000-0xe0ff]
0.104394] pci 0000:38:00.0: reg 0x24: [mem 0xfe600000-0xfe67ffff]
0.104417] pci 0000:38:00.0: enabling Extended Tags
0.104435] pci 0000:38:00.0: BAR 0: assigned to efifb
0.104544] pci 0000:38:00.0: PME# supported from D1 D2 D3hot D3cold
0.104675] pci 0000:38:00.1: [1002:15de] type 00 class 0x040300
0.104708] pci 0000:38:00.1: reg 0x10: [mem 0xfe688000-0xfe68bfff]
0.104791] pci 0000:38:00.1: enabling Extended Tags
0.104872] pci 0000:38:00.1: PME# supported from D1 D2 D3hot D3cold
0.104960] pci 0000:38:00.2: [1022:15df] type 00 class 0x108000
0.105017] pci 0000:38:00.2: reg 0x18: [mem 0xfe500000-0xfe5fffff]
0.105054] pci 0000:38:00.2: reg 0x24: [mem 0xfe68c000-0xfe68dfff]
0.105077] pci 0000:38:00.2: enabling Extended Tags
0.105241] pci 0000:38:00.3: [1022:15e0] type 00 class 0x0c0330
0.105281] pci 0000:38:00.3: reg 0x10: [mem 0xfe400000-0xfe4fffff 64bit]
0.105352] pci 0000:38:00.3: enabling Extended Tags
0.105441] pci 0000:38:00.3: PME# supported from D0 D3hot D3cold
0.105530] pci 0000:38:00.4: [1022:15e1] type 00 class 0x0c0330
0.105570] pci 0000:38:00.4: reg 0x10: [mem 0xfe300000-0xfe3fffff 64bit]
0.105641] pci 0000:38:00.4: enabling Extended Tags
0.105730] pci 0000:38:00.4: PME# supported from D0 D3hot D3cold
0.105821] pci 0000:38:00.6: [1022:15e3] type 00 class 0x040300
0.105854] pci 0000:38:00.6: reg 0x10: [mem 0xfe680000-0xfe687fff]
0.105937] pci 0000:38:00.6: enabling Extended Tags
0.106018] pci 0000:38:00.6: PME# supported from D0 D3hot D3cold
0.106192] pci 0000:00:08.1: PCI bridge to [bus 38]
0.106200] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
0.106204] pci 0000:00:08.1: bridge window [mem 0xfe300000-0xfe6fffff]
0.106211] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
0.106308] pci 0000:39:00.0: [1022:7901] type 00 class 0x010601
0.106403] pci 0000:39:00.0: reg 0x24: [mem 0xfe900000-0xfe9007ff]
0.106426] pci 0000:39:00.0: enabling Extended Tags
0.106513] pci 0000:39:00.0: PME# supported from D3hot D3cold
0.106634] pci 0000:00:08.2: PCI bridge to [bus 39]
0.106644] pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff]
0.107124] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
0.107175] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
0.107217] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
0.107273] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
0.107321] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
0.107361] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
0.107400] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
0.107439] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
0.108019] pci 0000:38:00.0: vgaarb: setting as boot VGA device
0.108023] pci 0000:38:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
0.108027] pci 0000:38:00.0: vgaarb: bridge control possible
0.108029] vgaarb: loaded
0.108029] pps_core: LinuxPPS API ver. 1 registered
0.108029] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
0.108029] PTP clock support registered
0.108029] EDAC MC: Ver: 3.0.0
0.108142] Registered efivars operations
0.128479] PCI: Using ACPI for IRQ routing
0.130501] PCI: pci_cache_line_size set to 64 bytes
0.130579] e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
0.130580] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
0.130580] e820: reserve RAM buffer [mem 0x9d1e5000-0x9fffffff]
0.130581] e820: reserve RAM buffer [mem 0x9d3c7000-0x9fffffff]
0.130581] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
0.130582] e820: reserve RAM buffer [mem 0x41f340000-0x41fffffff]
0.132072] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
0.132082] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
0.134117] clocksource: Switched to clocksource tsc-early
0.141481] VFS: Disk quotas dquot_6.6.0
0.141524] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
0.141679] AppArmor: AppArmor Filesystem Enabled
0.141693] pnp: PnP ACPI init
0.141839] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
0.141844] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
0.141902] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
0.141906] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
0.141989] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
0.142118] system 00:03: [io 0x0a00-0x0a0f] has been reserved
0.142121] system 00:03: [io 0x0a10-0x0a1f] has been reserved
0.142123] system 00:03: [io 0x0a20-0x0a2f] has been reserved
0.142125] system 00:03: [io 0x0a40-0x0a4f] has been reserved
0.142128] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
0.142366] pnp 00:04: [dma 0 disabled]
0.142440] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
0.142625] pnp 00:05: [dma 0 disabled]
0.142667] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
0.142814] system 00:06: [io 0x04d0-0x04d1] has been reserved
0.142817] system 00:06: [io 0x040b] has been reserved
0.142819] system 00:06: [io 0x04d6] has been reserved
0.142821] system 00:06: [io 0x0c00-0x0c01] has been reserved
0.142823] system 00:06: [io 0x0c14] has been reserved
0.142825] system 00:06: [io 0x0c50-0x0c51] has been reserved
0.142827] system 00:06: [io 0x0c52] has been reserved
0.142829] system 00:06: [io 0x0c6c] has been reserved
0.142831] system 00:06: [io 0x0c6f] has been reserved
0.142832] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
0.142834] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
0.142836] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
0.142838] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
0.142840] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
0.142842] system 00:06: [io 0x0800-0x089f] has been reserved
0.142844] system 00:06: [io 0x0b00-0x0b0f] has been reserved
0.142846] system 00:06: [io 0x0b20-0x0b3f] has been reserved
0.142848] system 00:06: [io 0x0900-0x090f] has been reserved
0.142849] system 00:06: [io 0x0910-0x091f] has been reserved
0.142852] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
0.142854] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
0.142856] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
0.142858] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
0.142860] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
0.142862] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
0.142864] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
0.142868] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
0.143152] pnp: PnP ACPI: found 7 devices
0.148968] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
0.149036] pci 0000:16:00.0: PCI bridge to [bus 17]
0.149050] pci 0000:16:01.0: PCI bridge to [bus 18]
0.149053] pci 0000:16:01.0: bridge window [io 0xf000-0xffff]
0.149059] pci 0000:16:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
0.149069] pci 0000:16:04.0: PCI bridge to [bus 1b]
0.149082] pci 0000:15:00.2: PCI bridge to [bus 16-1b]
0.149085] pci 0000:15:00.2: bridge window [io 0xf000-0xffff]
0.149090] pci 0000:15:00.2: bridge window [mem 0xfe700000-0xfe7fffff]
0.149099] pci 0000:00:01.2: PCI bridge to [bus 15-1b]
0.149102] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
0.149107] pci 0000:00:01.2: bridge window [mem 0xfe700000-0xfe8fffff]
0.149117] pci 0000:00:08.1: PCI bridge to [bus 38]
0.149120] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
0.149125] pci 0000:00:08.1: bridge window [mem 0xfe300000-0xfe6fffff]
0.149130] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
0.149137] pci 0000:00:08.2: PCI bridge to [bus 39]
0.149142] pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff]
0.149152] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
0.149153] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
0.149154] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
0.149155] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
0.149156] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
0.149157] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
0.149158] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
0.149159] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
0.149160] pci_bus 0000:15: resource 0 [io 0xf000-0xffff]
0.149161] pci_bus 0000:15: resource 1 [mem 0xfe700000-0xfe8fffff]
0.149162] pci_bus 0000:16: resource 0 [io 0xf000-0xffff]
0.149162] pci_bus 0000:16: resource 1 [mem 0xfe700000-0xfe7fffff]
0.149163] pci_bus 0000:18: resource 0 [io 0xf000-0xffff]
0.149164] pci_bus 0000:18: resource 1 [mem 0xfe700000-0xfe7fffff]
0.149165] pci_bus 0000:38: resource 0 [io 0xe000-0xefff]
0.149166] pci_bus 0000:38: resource 1 [mem 0xfe300000-0xfe6fffff]
0.149167] pci_bus 0000:38: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
0.149168] pci_bus 0000:39: resource 1 [mem 0xfe900000-0xfe9fffff]
0.149349] NET: Registered protocol family 2
0.149584] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
0.149633] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
0.149798] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
0.149928] TCP: Hash tables configured (established 131072 bind 65536)
0.149971] UDP hash table entries: 8192 (order: 6, 262144 bytes)
0.150008] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
0.150111] NET: Registered protocol family 1
0.150275] pci 0000:38:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
0.150477] PCI: CLS 64 bytes, default 64
0.150504] Unpacking initramfs...
0.454352] Freeing initrd memory: 25356K
0.454397] AMD-Vi: Unable to write to IOMMU perf counter.
0.454516] pci 0000:00:00.2: can't derive routing for PCI INT A
0.454518] pci 0000:00:00.2: PCI INT A: not connected
0.454957] iommu: Adding device 0000:00:01.0 to group 0
0.455162] iommu: Adding device 0000:00:01.2 to group 1
0.455383] iommu: Adding device 0000:00:08.0 to group 2
0.455585] iommu: Adding device 0000:00:08.1 to group 3
0.455605] iommu: Adding device 0000:00:08.2 to group 2
0.455792] iommu: Adding device 0000:00:14.0 to group 4
0.455808] iommu: Adding device 0000:00:14.3 to group 4
0.456023] iommu: Adding device 0000:00:18.0 to group 5
0.456039] iommu: Adding device 0000:00:18.1 to group 5
0.456054] iommu: Adding device 0000:00:18.2 to group 5
0.456069] iommu: Adding device 0000:00:18.3 to group 5
0.456084] iommu: Adding device 0000:00:18.4 to group 5
0.456098] iommu: Adding device 0000:00:18.5 to group 5
0.456113] iommu: Adding device 0000:00:18.6 to group 5
0.456137] iommu: Adding device 0000:00:18.7 to group 5
0.456347] iommu: Adding device 0000:15:00.0 to group 6
0.456377] iommu: Adding device 0000:15:00.1 to group 6
0.456406] iommu: Adding device 0000:15:00.2 to group 6
0.456423] iommu: Adding device 0000:16:00.0 to group 6
0.456440] iommu: Adding device 0000:16:01.0 to group 6
0.456464] iommu: Adding device 0000:16:04.0 to group 6
0.456492] iommu: Adding device 0000:18:00.0 to group 6
0.456764] iommu: Adding device 0000:38:00.0 to group 7
0.456844] iommu: Using direct mapping for device 0000:38:00.0
0.456939] iommu: Adding device 0000:38:00.1 to group 8
0.456974] iommu: Adding device 0000:38:00.2 to group 8
0.457010] iommu: Adding device 0000:38:00.3 to group 8
0.457051] iommu: Adding device 0000:38:00.4 to group 8
0.457086] iommu: Adding device 0000:38:00.6 to group 8
0.457102] iommu: Adding device 0000:39:00.0 to group 2
0.457356] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
0.457358] AMD-Vi: Extended features (0x4f77ef22294ada):
0.457359] PPR NX GT IA GA PC GA_vAPIC
0.457362] AMD-Vi: Interrupt remapping enabled
0.457363] AMD-Vi: virtual APIC enabled
0.551588] AMD-Vi: Lazy IO/TLB flushing enabled
0.552445] amd_uncore: AMD NB counters detected
0.552456] amd_uncore: AMD LLC counters detected
0.553648] Initialise system trusted keyrings
0.553804] workingset: timestamp_bits=40 max_order=22 bucket_order=0
0.555511] zbud: loaded
0.737855] Key type asymmetric registered
0.737861] Asymmetric key parser 'x509' registered
0.737939] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
0.738017] io scheduler noop registered
0.738022] io scheduler deadline registered
0.738138] io scheduler cfq registered (default)
0.738140] io scheduler mq-deadline registered
0.739464] pcieport 0000:00:01.2: AER enabled with IRQ 26
0.739481] pcieport 0000:00:01.2: Signaling PME with IRQ 26
0.739515] pcieport 0000:00:08.1: Signaling PME with IRQ 27
0.739549] pcieport 0000:00:08.2: Signaling PME with IRQ 28
0.739572] efifb: probing for efifb
0.739584] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
0.739586] efifb: mode is 1024x768x32, linelength=4096, pages=1
0.739588] efifb: scrolling: redraw
0.739591] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
0.741195] Console: switching to colour frame buffer device 128x48
0.742760] fb0: EFI VGA frame buffer device
0.742809] Monitor-Mwait will be used to enter C-1 state
0.743402] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
0.764327] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
0.764641] Linux agpgart interface v0.103
0.764894] AMD IOMMUv2 driver by Joerg Roedel <jroedel@xxxxxxx>
0.765391] i8042: PNP: No PS/2 controller found.
0.765460] mousedev: PS/2 mouse device common for all mice
0.765532] rtc_cmos 00:02: RTC can wake from S4
0.765728] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
0.765805] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
0.765886] ledtrig-cpu: registered to indicate activity on CPUs
0.766541] NET: Registered protocol family 10
0.769771] Segment Routing with IPv6
0.769809] mip6: Mobile IPv6
0.769822] NET: Registered protocol family 17
0.769841] mpls_gso: MPLS GSO support
0.770290] microcode: CPU0: patch_level=0x0810100b
0.770314] microcode: CPU1: patch_level=0x0810100b
0.770336] microcode: CPU2: patch_level=0x0810100b
0.770356] microcode: CPU3: patch_level=0x0810100b
0.770427] microcode: Microcode Update Driver: v2.2.
0.770448] sched_clock: Marking stable (770423101, 0)->(857857771, -87434670)
0.770631] registered taskstats version 1
0.771211] Loading compiled-in X.509 certificates
0.794925] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
0.795770] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
0.796393] zswap: loaded using pool lzo/zbud
0.797180] AppArmor: AppArmor sha1 policy hashing enabled
0.798412] rtc_cmos 00:02: setting system clock to 2018-07-16 15:55:51 UTC (1531756551)
1.072227] Freeing unused kernel memory: 1524K
1.072730] Write protecting the kernel read-only data: 16384k
1.074580] Freeing unused kernel memory: 2024K
1.076388] Freeing unused kernel memory: 960K
1.080506] x86/mm: Checked W+X mappings: passed, no W+X pages found.
1.136229] SCSI subsystem initialized
1.137219] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
1.137711] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
1.138344] ACPI: bus type USB registered
1.138861] usbcore: registered new interface driver usbfs
1.139368] usbcore: registered new interface driver hub
1.140090] libata version 3.00 loaded.
1.140376] usbcore: registered new device driver usb
1.141459] ahci 0000:15:00.1: version 3.0
1.141664] ahci 0000:15:00.1: SSS flag set, parallel bus scan disabled
1.142214] ahci 0000:15:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
1.142720] ahci 0000:15:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
1.143362] cryptd: max_cpu_qlen set to 1000
1.146214] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
1.147186] scsi host0: ahci
1.147909] scsi host1: ahci
1.148825] scsi host2: ahci
1.149351] scsi host3: ahci
1.149850] scsi host4: ahci
1.150914] scsi host5: ahci
1.151415] scsi host6: ahci
1.151902] scsi host7: ahci
1.152349] ata1: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880100 irq 36
1.152750] ata2: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880180 irq 36
1.153137] ata3: DUMMY
1.153516] ata4: DUMMY
1.153891] ata5: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880300 irq 36
1.154283] ata6: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880380 irq 36
1.154668] ata7: DUMMY
1.155053] ata8: DUMMY
1.155504] AVX2 version of gcm_enc/dec engaged.
1.155817] xhci_hcd 0000:15:00.0: xHCI Host Controller
1.155880] ahci 0000:39:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
1.155885] ahci 0000:39:00.0: flags: 64bit ncq sntf ilck led clo only pmp fbs pio
1.155895] AES CTR mode by8 optimization enabled
1.156140] scsi host8: ahci
1.156315] xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 1
1.156735] ata9: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900100 irq 38
1.161099] r8169 0000:18:00.0 eth0: RTL8168h/8111h at 0x (ptrval), 30:9c:23:04:d6:98, XID 14100800 IRQ 39
1.161626] r8169 0000:18:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
1.163585] r8169 0000:18:00.0 enp24s0: renamed from eth0
1.169756] alg: No test for pcbc(aes) (pcbc-aes-aesni)
1.212478] xhci_hcd 0000:15:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x48000410
1.213285] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
1.213902] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.214516] usb usb1: Product: xHCI Host Controller
1.215139] usb usb1: Manufacturer: Linux 4.16.0-2-amd64 xhci-hcd
1.215758] usb usb1: SerialNumber: 0000:15:00.0
1.216516] hub 1-0:1.0: USB hub found
1.217153] hub 1-0:1.0: 10 ports detected
1.218236] xhci_hcd 0000:15:00.0: xHCI Host Controller
1.218781] xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 2
1.219322] xhci_hcd 0000:15:00.0: Host supports USB 3.10 Enhanced SuperSpeed
1.219771] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
1.220205] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
1.220633] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.221065] usb usb2: Product: xHCI Host Controller
1.221487] usb usb2: Manufacturer: Linux 4.16.0-2-amd64 xhci-hcd
1.221912] usb usb2: SerialNumber: 0000:15:00.0
1.222409] hub 2-0:1.0: USB hub found
1.222819] hub 2-0:1.0: 4 ports detected
1.223426] xhci_hcd 0000:38:00.3: xHCI Host Controller
1.223827] xhci_hcd 0000:38:00.3: new USB bus registered, assigned bus number 3
1.224382] xhci_hcd 0000:38:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x40000410
1.225056] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
1.225486] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.225922] usb usb3: Product: xHCI Host Controller
1.226362] usb usb3: Manufacturer: Linux 4.16.0-2-amd64 xhci-hcd
1.226815] usb usb3: SerialNumber: 0000:38:00.3
1.227345] hub 3-0:1.0: USB hub found
1.227796] hub 3-0:1.0: 4 ports detected
1.228546] xhci_hcd 0000:38:00.3: xHCI Host Controller
1.228999] xhci_hcd 0000:38:00.3: new USB bus registered, assigned bus number 4
1.229456] xhci_hcd 0000:38:00.3: Host supports USB 3.10 Enhanced SuperSpeed
1.229932] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
1.230408] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
1.230874] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.231346] usb usb4: Product: xHCI Host Controller
1.231816] usb usb4: Manufacturer: Linux 4.16.0-2-amd64 xhci-hcd
1.232319] usb usb4: SerialNumber: 0000:38:00.3
1.232878] hub 4-0:1.0: USB hub found
1.233344] hub 4-0:1.0: 4 ports detected
1.233993] xhci_hcd 0000:38:00.4: xHCI Host Controller
1.234458] xhci_hcd 0000:38:00.4: new USB bus registered, assigned bus number 5
1.235034] xhci_hcd 0000:38:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x40000410
1.235741] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
1.236201] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.236648] usb usb5: Product: xHCI Host Controller
1.237092] usb usb5: Manufacturer: Linux 4.16.0-2-amd64 xhci-hcd
1.237534] usb usb5: SerialNumber: 0000:38:00.4
1.238047] hub 5-0:1.0: USB hub found
1.238475] hub 5-0:1.0: 1 port detected
1.238961] xhci_hcd 0000:38:00.4: xHCI Host Controller
1.239391] xhci_hcd 0000:38:00.4: new USB bus registered, assigned bus number 6
1.239816] xhci_hcd 0000:38:00.4: Host supports USB 3.10 Enhanced SuperSpeed
1.240262] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
1.240706] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
1.241145] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.241590] usb usb6: Product: xHCI Host Controller
1.242028] usb usb6: Manufacturer: Linux 4.16.0-2-amd64 xhci-hcd
1.242467] usb usb6: SerialNumber: 0000:38:00.4
1.242972] hub 6-0:1.0: USB hub found
1.243398] hub 6-0:1.0: 1 port detected
1.472900] ata1: SATA link down (SStatus 0 SControl 300)
1.552351] usb 1-10: new low-speed USB device number 2 using xhci_hcd
1.565353] tsc: Refined TSC clocksource calibration: 3503.061 MHz
1.566380] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x327e9c43762, max_idle_ns: 440795243118 ns
1.567161] clocksource: Switched to clocksource tsc
1.572354] usb 5-1: new low-speed USB device number 2 using xhci_hcd
1.588228] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
1.609051] usb 4-2: New USB device found, idVendor=0781, idProduct=558b
1.610103] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1.610746] usb 4-2: Product: Extreme
1.611332] usb 4-2: Manufacturer: SanDisk
1.611905] usb 4-2: SerialNumber: 4C530001051117121354
1.615396] usb-storage 4-2:1.0: USB Mass Storage device detected
1.616199] scsi host9: usb-storage 4-2:1.0
1.616901] usbcore: registered new interface driver usb-storage
1.618014] usbcore: registered new interface driver uas
1.636036] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
1.637484] ata9.00: supports DRM functions and may not be fully accessible
1.638131] ata9.00: ATA-10: CT1000MX500SSD4, M3CR020, max UDMA/133
1.638691] ata9.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
1.639851] ata9.00: supports DRM functions and may not be fully accessible
1.641007] ata9.00: configured for UDMA/133
1.737154] usb 5-1: New USB device found, idVendor=413c, idProduct=3012
1.738142] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
1.739149] usb 5-1: Product: Dell USB Optical Mouse
1.739835] usb 5-1: Manufacturer: Dell
1.748313] hidraw: raw HID events driver (C) Jiri Kosina
1.753205] usbcore: registered new interface driver usbhid
1.753803] usbhid: USB HID core driver
1.755189] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:08.1/0000:38:00.4/usb5/5-1/5-1:1.0/0003:413C:3012.0001/input/input0
1.756613] hid-generic 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:38:00.4-1/input0
1.788318] ata2: SATA link down (SStatus 0 SControl 300)
1.844683] usb 1-10: New USB device found, idVendor=413c, idProduct=2105
1.845784] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
1.846458] usb 1-10: Product: Dell USB Keyboard
1.847128] usb 1-10: Manufacturer: Dell
1.909933] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-10/1-10:1.0/0003:413C:2105.0002/input/input1
1.968728] hid-generic 0003:413C:2105.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:15:00.0-10/input0
2.103937] ata5: SATA link down (SStatus 0 SControl 300)
2.420183] ata6: SATA link down (SStatus 0 SControl 300)
2.421908] scsi 8:0:0:0: Direct-Access ATA CT1000MX500SSD4 020 PQ: 0 ANSI: 5
2.424478] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
2.425224] sd 8:0:0:0: [sda] 4096-byte physical blocks
2.425968] sd 8:0:0:0: [sda] Write Protect is off
2.426705] sd 8:0:0:0: [sda] Mode Sense: 00 3a 00 00
2.426718] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
2.428491] sda: sda1 sda2 sda3
2.429596] sd 8:0:0:0: [sda] supports TCG Opal
2.430313] sd 8:0:0:0: [sda] Attached SCSI disk
2.520010] raid6: sse2x1 gen() 8258 MB/s
2.588007] raid6: sse2x1 xor() 7848 MB/s
2.620886] scsi 9:0:0:0: Direct-Access SanDisk Extreme 1.00 PQ: 0 ANSI: 6
2.622427] sd 9:0:0:0: [sdb] 122552320 512-byte logical blocks: (62.7 GB/58.4 GiB)
2.623305] sd 9:0:0:0: [sdb] Write Protect is off
2.624148] sd 9:0:0:0: [sdb] Mode Sense: 43 00 00 00
2.624439] sd 9:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
2.626950] sdb: sdb1 sdb2 sdb3
2.628508] sd 9:0:0:0: [sdb] Attached SCSI removable disk
2.636728] random: fast init done
2.656008] raid6: sse2x2 gen() 17171 MB/s
2.724008] raid6: sse2x2 xor() 10692 MB/s
2.792009] raid6: sse2x4 gen() 17195 MB/s
2.860008] raid6: sse2x4 xor() 9537 MB/s
2.928008] raid6: avx2x1 gen() 18794 MB/s
2.996008] raid6: avx2x1 xor() 14057 MB/s
3.064006] raid6: avx2x2 gen() 23524 MB/s
3.132006] raid6: avx2x2 xor() 15075 MB/s
3.200007] raid6: avx2x4 gen() 24420 MB/s
3.268008] raid6: avx2x4 xor() 13511 MB/s
3.268590] raid6: using algorithm avx2x4 gen() 24420 MB/s
3.269157] raid6: .... xor() 13511 MB/s, rmw enabled
3.269722] raid6: using avx2x2 recovery algorithm
3.271303] xor: automatically using best checksumming function avx
3.272655] async_tx: api initialized (async)
3.287638] device-mapper: uevent: version 1.0.3
3.288381] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@xxxxxxxxxx
10.891088] random: crng init done
13.279343] NET: Registered protocol family 38
13.532395] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
13.846358] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
13.929517] acpi_cpufreq: overriding BIOS provided _PSD data
13.933205] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
13.933648] ACPI: Power Button [PWRB]
13.934125] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
13.934654] ACPI: Power Button [PWRF]
13.944255] parport_pc 00:04: reported by Plug and Play ACPI
13.944830] parport0: PC-style at 0x378, irq 5 [PCSPP]
13.968760] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
13.973069] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
13.976099] sp5100-tco sp5100-tco: I/O address 0x0cd6 already in use
13.976888] sp5100-tco: probe of sp5100-tco failed with error -16
13.999111] sd 8:0:0:0: Attached scsi generic sg0 type 0
14.000275] input: PC Speaker as /devices/platform/pcspkr/input/input4
14.001357] EFI Variables Facility v0.08 2004-May-17
14.001482] snd_hda_intel 0000:38:00.1: Handle vga_switcheroo audio client
14.001522] sd 9:0:0:0: Attached scsi generic sg1 type 0
14.032460] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input5
14.032980] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input6
14.033508] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input7
14.034218] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input8
14.034780] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input9
14.035312] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input10
14.054041] pstore: using zlib compression
14.055301] pstore: Registered efi as persistent store backend
14.055437] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
14.056217] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
14.056677] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
14.057132] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
14.057580] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
14.058030] snd_hda_codec_realtek hdaudioC1D0: inputs:
14.061637] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
14.062091] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
14.062535] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
14.063308] kvm: disabled by bios
14.067203] MCE: In-kernel MCE decoding enabled.
14.069507] EDAC amd64: Node 0: DRAM ECC disabled.
14.069969] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
14.069969] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
14.069969] (Note that use of the override may cause unknown side effects.)
14.096973] ppdev: user-space parallel port driver
14.124563] EDAC amd64: Node 0: DRAM ECC disabled.
14.125144] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
14.125144] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
14.125144] (Note that use of the override may cause unknown side effects.)
14.145409] [drm:amdgpu_init [amdgpu]] *ERROR* VGACON disables amdgpu kernel modesetting.
14.146596] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input11
14.148523] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input12
14.149788] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input13
14.149873] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input14
14.149943] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input15
14.150009] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input16
14.150068] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input17
14.160828] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
31.653198] r8169 0000:18:00.0: firmware: failed to load rtl_nic/rtl8168h-2.fw (-2)
31.653245] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
31.653292] r8169 0000:18:00.0: Direct firmware load for rtl_nic/rtl8168h-2.fw failed with error -2
31.653339] r8169 0000:18:00.0 enp24s0: unable to load firmware patch rtl_nic/rtl8168h-2.fw (-2)
31.694665] r8169 0000:18:00.0 enp24s0: link down
31.694677] r8169 0000:18:00.0 enp24s0: link down
31.694796] IPv6: ADDRCONF(NETDEV_UP): enp24s0: link is not ready
34.876371] r8169 0000:18:00.0 enp24s0: link up
34.876425] IPv6: ADDRCONF(NETDEV_CHANGE): enp24s0: link becomes ready
>smime.p7s
Cryptographic Signature

Next message: Rich Felker: "cpu_no_speculation omissions?"
Previous message: Frederic Weisbecker: "Re: [tip:sched/core] sched/cputime: Ensure accurate utime and stime ratio in cputime_adjust()"
Next in thread: Alex Deucher: "Re: KMS does not work on MSI B350M MORTAR with AMD Ryzen 3 2200g"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]