Re: [PATCH v3] PCI: Check for PCIe downtraining conditions

[Bjorn Helgaas]

[+cc maintainers of drivers that already use pcie_print_link_status()
and GPU folks]

On Mon, Jun 04, 2018 at 10:55:21AM -0500, Alexandru Gagniuc wrote:
> PCIe downtraining happens when both the device and PCIe port are
> capable of a larger bus width or higher speed than negotiated.
> Downtraining might be indicative of other problems in the system, and
> identifying this from userspace is neither intuitive, nor straigh
> forward.

s/straigh/straight/
In this context, I think "straightforward" should be closed up
(without the space).

> The easiest way to detect this is with pcie_print_link_status(),
> since the bottleneck is usually the link that is downtrained. It's not
> a perfect solution, but it works extremely well in most cases.

This is an interesting idea.  I have two concerns:

Some drivers already do this on their own, and we probably don't want
duplicate output for those devices.  In most cases (ixgbe and mlx* are
exceptions), the drivers do this unconditionally so we *could* remove
it from the driver if we add it to the core.  The dmesg order would
change, and the message wouldn't be associated with the driver as it
now is.

Also, I think some of the GPU devices might come up at a lower speed,
then download firmware, then reset the device so it comes up at a
higher speed.  I think this patch will make us complain about about
the low initial speed, which might confuse users.

So I'm not sure whether it's better to do this in the core for all
devices, or if we should just add it to the high-performance drivers
that really care.

> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
> ---
> 
> Changes since v2:
>  - Check dev->is_virtfn flag
> 
> Changes since v1:
>  - Use pcie_print_link_status() instead of reimplementing logic
>  
>  drivers/pci/probe.c | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index ac91b6fd0bcd..a88ec8c25dd5 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -2146,6 +2146,25 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
>  	return dev;
>  }
>  
> +static void pcie_check_upstream_link(struct pci_dev *dev)
> +{
> +
> +	if (!pci_is_pcie(dev))
> +		return;
> +
> +	/* Look from the device up to avoid downstream ports with no devices. */
> +	if ((pci_pcie_type(dev) != PCI_EXP_TYPE_ENDPOINT) &&
> +	    (pci_pcie_type(dev) != PCI_EXP_TYPE_LEG_END) &&
> +	    (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM))
> +		return;

Do we care about Upstream Ports here?  I suspect that ultimately we
only care about the bandwidth to Endpoints, and if an Endpoint is
constrained by a slow link farther up the tree,
pcie_print_link_status() is supposed to identify that slow link.

I would find this test easier to read as

  if (!(type == PCI_EXP_TYPE_ENDPOINT || type == PCI_EXP_TYPE_LEG_END))
    return;

But maybe I'm the only one that finds the conjunction of inequalities
hard to read.  No big deal either way.

> +	/* Multi-function PCIe share the same link/status. */
> +	if ((PCI_FUNC(dev->devfn) != 0) || dev->is_virtfn)
> +		return;
> +
> +	pcie_print_link_status(dev);
> +}
> +
>  static void pci_init_capabilities(struct pci_dev *dev)
>  {
>  	/* Enhanced Allocation */
> @@ -2181,6 +2200,9 @@ static void pci_init_capabilities(struct pci_dev *dev)
>  	/* Advanced Error Reporting */
>  	pci_aer_init(dev);
>  
> +	/* Check link and detect downtrain errors */
> +	pcie_check_upstream_link(dev);
> +
>  	if (pci_probe_reset_function(dev) == 0)
>  		dev->reset_fn = 1;
>  }
> -- 
> 2.14.4
>