Re: [PATCH v5 2/2] ARM: dts: am335x: add am335x-sancloud-bbe board support

[Koen Kooi]

> Op 17 jul. 2018, om 08:36 heeft Tony Lindgren <tony@xxxxxxxxxxx> het volgende geschreven:
> 
> * Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx> [180717 06:28]:
>> +&i2c0 {
>> +	lps331ap: barometer@5c {
>> +		compatible = "st,lps331ap-press";
>> +		st,drdy-int-pin = <1>;
>> +		reg = <0x5c>;
>> +		interrupt-parent = <&gpio1>;
>> +		interrupts = <26 IRQ_TYPE_EDGE_RISING>;
>> +	};
>> +
>> +	mpu6050: accelerometer@68 {
>> +		compatible = "invensense,mpu6050";
>> +		reg = <0x68>;
>> +		interrupt-parent = <&gpio0>;
>> +		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
>> +		orientation = <0xff 0 0 0 1 0 0 0 0xff>;
>> +	};
>> +
>> +	usb2512b@2c {
>> +		compatible = "microchip,usb2512b";
>> +		reg = <0x2c>;
>> +		reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
>> +		/* wifi on port 4 */
>> +	};
>> +};
> 
> Thanks for updating it, should the last one be usb-hub@2c?

Yes, it should be. Never update patches halfway through your first morning coffee :) V6 coming up!

regards,

Koen