[PATCH 1/5] spi: dw: fix possible race condition

[Alexandre Belloni]

It is possible to get an interrupt as soon as it is requested.  dw_spi_irq
does spi_controller_get_devdata(master) and expects it to be different than
NULL. However, spi_controller_set_devdata() is called after request_irq(),
resulting in the following crash:

CPU 0 Unable to handle kernel paging request at virtual address 00000030, epc == 8058e09c, ra == 8018ff90
[...]
Call Trace:
[<8058e09c>] dw_spi_irq+0x8/0x64
[<8018ff90>] __handle_irq_event_percpu+0x70/0x1d4
[<80190128>] handle_irq_event_percpu+0x34/0x8c
[<801901c4>] handle_irq_event+0x44/0x80
[<801951a8>] handle_level_irq+0xdc/0x194
[<8018f580>] generic_handle_irq+0x38/0x50
[<804c6924>] ocelot_irq_handler+0x104/0x1c0
[<8018f580>] generic_handle_irq+0x38/0x50
[<8075c1d8>] do_IRQ+0x18/0x24
[<804c4714>] plat_irq_dispatch+0xa4/0x150
[<80106ba8>] except_vec_vi_end+0xb8/0xc4
[<8075ba5c>] _raw_spin_unlock_irqrestore+0x14/0x20
[<801926c8>] __setup_irq+0x53c/0x8e0
[<80192e28>] request_threaded_irq+0xf4/0x1e8
[<8058ed18>] dw_spi_add_host+0x264/0x2c4
[<8058f2ec>] dw_spi_mmio_probe+0x258/0x27c
[<8051f4a4>] platform_drv_probe+0x58/0xbc
[<8051daa8>] driver_probe_device+0x308/0x40c
[<8051dc9c>] __driver_attach+0xf0/0xf8
[<8051b698>] bus_for_each_dev+0x78/0xcc
[<8051c2c0>] bus_add_driver+0x1b4/0x228
[<8051e840>] driver_register+0x84/0x154
[<801001d8>] do_one_initcall+0x54/0x1ac
[<80880e90>] kernel_init_freeable+0x1ec/0x2ac
[<80755310>] kernel_init+0x14/0x110
[<80106698>] ret_from_kernel_thread+0x14/0x1c
Code: 00000000  8ca40050  8c820008 <8c420030> 0000000f  3042003f  10400007  00000000  8ca20230

Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
---
 drivers/spi/spi-dw.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index f693bfe95ab9..a087464efdd7 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -485,6 +485,8 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
 	dws->dma_inited = 0;
 	dws->dma_addr = (dma_addr_t)(dws->paddr + DW_SPI_DR);
 
+	spi_controller_set_devdata(master, dws);
+
 	ret = request_irq(dws->irq, dw_spi_irq, IRQF_SHARED, dev_name(dev),
 			  master);
 	if (ret < 0) {
@@ -518,7 +520,6 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
 		}
 	}
 
-	spi_controller_set_devdata(master, dws);
 	ret = devm_spi_register_controller(dev, master);
 	if (ret) {
 		dev_err(&master->dev, "problem registering spi master\n");
-- 
2.18.0