[PATCH RESEND 04/15] ASoC: meson: add axg toddr driver

[Jerome Brunet]

Add the capture memory interface of Amlogic's axg SoCs.
TDM, SPDIF or PDM input devices place audio samples inside this FIFO.
The FIFO content is then pushed to DDR

Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
 sound/soc/meson/Kconfig     |   7 ++
 sound/soc/meson/Makefile    |   2 +
 sound/soc/meson/axg-toddr.c | 199 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 208 insertions(+)
 create mode 100644 sound/soc/meson/axg-toddr.c

diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig
index cdd78f62e8d7..3916060edcae 100644
--- a/sound/soc/meson/Kconfig
+++ b/sound/soc/meson/Kconfig
@@ -12,4 +12,11 @@ config SND_MESON_AXG_FRDDR
 	  Select Y or M to add support for the frontend playback interfaces
 	  embedded in the Amlogic AXG SoC family
 
+config SND_MESON_AXG_TODDR
+	tristate "Amlogic AXG Capture FIFO support"
+	select SND_MESON_AXG_FIFO
+	help
+	  Select Y or M to add support for the frontend capture interfaces
+	  embedded in the Amlogic AXG SoC family
+
 endmenu
diff --git a/sound/soc/meson/Makefile b/sound/soc/meson/Makefile
index 9c5d7d4a8e33..12edf2db2a24 100644
--- a/sound/soc/meson/Makefile
+++ b/sound/soc/meson/Makefile
@@ -2,6 +2,8 @@
 
 snd-soc-meson-axg-fifo-objs := axg-fifo.o
 snd-soc-meson-axg-frddr-objs := axg-frddr.o
+snd-soc-meson-axg-toddr-objs := axg-toddr.o
 
 obj-$(CONFIG_SND_MESON_AXG_FIFO) += snd-soc-meson-axg-fifo.o
 obj-$(CONFIG_SND_MESON_AXG_FRDDR) += snd-soc-meson-axg-frddr.o
+obj-$(CONFIG_SND_MESON_AXG_TODDR) += snd-soc-meson-axg-toddr.o
diff --git a/sound/soc/meson/axg-toddr.c b/sound/soc/meson/axg-toddr.c
new file mode 100644
index 000000000000..c2c9bb312586
--- /dev/null
+++ b/sound/soc/meson/axg-toddr.c
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (c) 2018 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
+
+/* This driver implements the frontend capture DAI of AXG based SoCs */
+
+#include <linux/clk.h>
+#include <linux/regmap.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+#include "axg-fifo.h"
+
+#define CTRL0_TODDR_SEL_RESAMPLE	BIT(30)
+#define CTRL0_TODDR_EXT_SIGNED		BIT(29)
+#define CTRL0_TODDR_PP_MODE		BIT(28)
+#define CTRL0_TODDR_TYPE_MASK		GENMASK(15, 13)
+#define CTRL0_TODDR_TYPE(x)		((x) << 13)
+#define CTRL0_TODDR_MSB_POS_MASK	GENMASK(12, 8)
+#define CTRL0_TODDR_MSB_POS(x)		((x) << 8)
+#define CTRL0_TODDR_LSB_POS_MASK	GENMASK(7, 3)
+#define CTRL0_TODDR_LSB_POS(x)		((x) << 3)
+
+static int axg_toddr_pcm_new(struct snd_soc_pcm_runtime *rtd,
+			     struct snd_soc_dai *dai)
+{
+	return axg_fifo_pcm_new(rtd, SNDRV_PCM_STREAM_CAPTURE);
+}
+
+static int axg_toddr_dai_hw_params(struct snd_pcm_substream *substream,
+				   struct snd_pcm_hw_params *params,
+				   struct snd_soc_dai *dai)
+{
+	struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai);
+	unsigned int type, width, msb = 31;
+
+	/*
+	 * NOTE:
+	 * Almost all backend will place the MSB at bit 31, except SPDIF Input
+	 * which will put it at index 28. When adding support for the SPDIF
+	 * Input, we'll need to find which type of backend we are connected to.
+	 */
+
+	switch (params_physical_width(params)) {
+	case 8:
+		type = 0; /* 8 samples of 8 bits */
+		break;
+	case 16:
+		type = 2; /* 4 samples of 16 bits - right justified */
+		break;
+	case 32:
+		type = 4; /* 2 samples of 32 bits - right justified */
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	width = params_width(params);
+
+	regmap_update_bits(fifo->map, FIFO_CTRL0,
+			   CTRL0_TODDR_TYPE_MASK |
+			   CTRL0_TODDR_MSB_POS_MASK |
+			   CTRL0_TODDR_LSB_POS_MASK,
+			   CTRL0_TODDR_TYPE(type) |
+			   CTRL0_TODDR_MSB_POS(msb) |
+			   CTRL0_TODDR_LSB_POS(msb - (width - 1)));
+
+	return 0;
+}
+
+static int axg_toddr_dai_startup(struct snd_pcm_substream *substream,
+				 struct snd_soc_dai *dai)
+{
+	struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai);
+	unsigned int fifo_threshold;
+	int ret;
+
+	/* Enable pclk to access registers and clock the fifo ip */
+	ret = clk_prepare_enable(fifo->pclk);
+	if (ret)
+		return ret;
+
+	/* Select orginal data - resampling not supported ATM */
+	regmap_update_bits(fifo->map, FIFO_CTRL0, CTRL0_TODDR_SEL_RESAMPLE, 0);
+
+	/* Only signed format are supported ATM */
+	regmap_update_bits(fifo->map, FIFO_CTRL0, CTRL0_TODDR_EXT_SIGNED,
+			   CTRL0_TODDR_EXT_SIGNED);
+
+	/* Apply single buffer mode to the interface */
+	regmap_update_bits(fifo->map, FIFO_CTRL0, CTRL0_TODDR_PP_MODE, 0);
+
+	/* TODDR does not have a configurable fifo depth */
+	fifo_threshold = AXG_FIFO_MIN_CNT - 1;
+	regmap_update_bits(fifo->map, FIFO_CTRL1, CTRL1_THRESHOLD_MASK,
+			   CTRL1_THRESHOLD(fifo_threshold));
+
+	return 0;
+}
+
+static void axg_toddr_dai_shutdown(struct snd_pcm_substream *substream,
+				   struct snd_soc_dai *dai)
+{
+	struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai);
+
+	clk_disable_unprepare(fifo->pclk);
+}
+
+static const struct snd_soc_dai_ops axg_toddr_ops = {
+	.hw_params	= axg_toddr_dai_hw_params,
+	.startup	= axg_toddr_dai_startup,
+	.shutdown	= axg_toddr_dai_shutdown,
+};
+
+static struct snd_soc_dai_driver axg_toddr_dai_drv = {
+	.name = "TODDR",
+	.capture = {
+		.stream_name	= "Capture",
+		.channels_min	= 1,
+		.channels_max	= AXG_FIFO_CH_MAX,
+		.rates		= AXG_FIFO_RATES,
+		.formats	= AXG_FIFO_FORMATS,
+	},
+	.ops		= &axg_toddr_ops,
+	.pcm_new	= axg_toddr_pcm_new,
+};
+
+static const char * const axg_toddr_sel_texts[] = {
+	"IN 0", "IN 1", "IN 2", "IN 3", "IN 4", "IN 6"
+};
+
+static const unsigned int axg_toddr_sel_values[] = {
+	0, 1, 2, 3, 4, 6
+};
+
+static SOC_VALUE_ENUM_SINGLE_DECL(axg_toddr_sel_enum, FIFO_CTRL0,
+				  CTRL0_SEL_SHIFT, CTRL0_SEL_MASK,
+				  axg_toddr_sel_texts, axg_toddr_sel_values);
+
+static const struct snd_kcontrol_new axg_toddr_in_mux =
+	SOC_DAPM_ENUM("Input Source", axg_toddr_sel_enum);
+
+static const struct snd_soc_dapm_widget axg_toddr_dapm_widgets[] = {
+	SND_SOC_DAPM_MUX("SRC SEL", SND_SOC_NOPM, 0, 0, &axg_toddr_in_mux),
+	SND_SOC_DAPM_AIF_IN("IN 0", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_IN("IN 1", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_IN("IN 2", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_IN("IN 3", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_IN("IN 4", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_IN("IN 6", NULL, 0, SND_SOC_NOPM, 0, 0),
+};
+
+static const struct snd_soc_dapm_route axg_toddr_dapm_routes[] = {
+	{ "Capture", NULL, "SRC SEL" },
+	{ "SRC SEL", "IN 0", "IN 0" },
+	{ "SRC SEL", "IN 1", "IN 1" },
+	{ "SRC SEL", "IN 2", "IN 2" },
+	{ "SRC SEL", "IN 3", "IN 3" },
+	{ "SRC SEL", "IN 4", "IN 4" },
+	{ "SRC SEL", "IN 6", "IN 6" },
+};
+
+static const struct snd_soc_component_driver axg_toddr_component_drv = {
+	.dapm_widgets		= axg_toddr_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(axg_toddr_dapm_widgets),
+	.dapm_routes		= axg_toddr_dapm_routes,
+	.num_dapm_routes	= ARRAY_SIZE(axg_toddr_dapm_routes),
+	.ops			= &axg_fifo_pcm_ops
+};
+
+static const struct axg_fifo_match_data axg_toddr_match_data = {
+	.component_drv	= &axg_toddr_component_drv,
+	.dai_drv	= &axg_toddr_dai_drv
+};
+
+static const struct of_device_id axg_toddr_of_match[] = {
+	{
+		.compatible = "amlogic,axg-toddr",
+		.data = &axg_toddr_match_data,
+	}, {}
+};
+MODULE_DEVICE_TABLE(of, axg_toddr_of_match);
+
+static struct platform_driver axg_toddr_pdrv = {
+	.probe = axg_fifo_probe,
+	.driver = {
+		.name = "axg-toddr",
+		.of_match_table = axg_toddr_of_match,
+	},
+};
+module_platform_driver(axg_toddr_pdrv);
+
+MODULE_DESCRIPTION("Amlogic AXG capture fifo driver");
+MODULE_AUTHOR("Jerome Brunet <jbrunet@xxxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
-- 
2.14.4