Re: [PATCH v3] media: dvb-frontends: add Socionext SC1501A ISDB-S/T demodulator driver

From: Katsuhiro Suzuki
Date: Tue Jul 17 2018 - 20:41:26 EST

Next message: Saeed Mahameed: "Re: [PATCH net-next] net/mlx5: fix an unused-function warning"
Previous message: danieladrian832: "Letter From General Lori Robinson"
In reply to: Mauro Carvalho Chehab: "Re: [PATCH v3] media: dvb-frontends: add Socionext SC1501A ISDB-S/T demodulator driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hello Mauro,

> -----Original Message-----
> From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
> Sent: Tuesday, July 17, 2018 7:59 PM
> To: Suzuki, Katsuhiro/éæ åå <suzuki.katsuhiro@xxxxxxxxxxxxx>
> Cc: linux-media@xxxxxxxxxxxxxxx; Masami Hiramatsu <masami.hiramatsu@xxxxxxxxxx>;
> Jassi Brar <jaswinder.singh@xxxxxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; Abylay Ospan <aospan@xxxxxxxx>
> Subject: Re: [PATCH v3] media: dvb-frontends: add Socionext SC1501A ISDB-S/T
> demodulator driver
>
> Em Tue, 17 Jul 2018 15:07:32 +0900
> "Katsuhiro Suzuki" <suzuki.katsuhiro@xxxxxxxxxxxxx> escreveu:
>
> > Hello Mauro,
> >
> > I want to send next version (v4) of this patch (just fix wrong max/min range of
> > frequency, fix symbol rate). But it depends your patches for DVB cores.
> >
> > Which way is better?
> >
> > - Send next version now
> > - Send next version after your DVB cores patches applied
> >
> > I want to try to solve LNB problem after current codes applied. I think LNB IC
> > will be defined as regulator device. Please tell me if you have comments about
> > it.
>
> I'm out of the town this week, but you can send it. No need to wait for
> my patches. Just add a notice that the patch depends on them. I'll
> handle after returning back from my trip.
>

Thank you, I see. Have a nice trip!

Regards,
--
Katsuhiro Suzuki

> >
> >
> > Regards,
> > --
> > Katsuhiro Suzuki
> >
> >
> > > -----Original Message-----
> > > From: Katsuhiro Suzuki <suzuki.katsuhiro@xxxxxxxxxxxxx>
> > > Sent: Tuesday, July 10, 2018 11:51 AM
> > > To: 'Mauro Carvalho Chehab' <mchehab+samsung@xxxxxxxxxx>; Suzuki, Katsuhiro/
> éæ
> > > åå <suzuki.katsuhiro@xxxxxxxxxxxxx>
> > > Cc: linux-media@xxxxxxxxxxxxxxx; Masami Hiramatsu
> <masami.hiramatsu@xxxxxxxxxx>;
> > > Jassi Brar <jaswinder.singh@xxxxxxxxxx>;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> > > linux-kernel@xxxxxxxxxxxxxxx; Abylay Ospan <aospan@xxxxxxxx>
> > > Subject: Re: [PATCH v3] media: dvb-frontends: add Socionext SC1501A ISDB-S/T
> > > demodulator driver
> > >
> > > Hello Mauro,
> > >
> > > > -----Original Message-----
> > > > From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
> > > > Sent: Monday, July 9, 2018 11:00 PM
> > > > To: Suzuki, Katsuhiro/éæ åå <suzuki.katsuhiro@xxxxxxxxxxxxx>
> > > > Cc: linux-media@xxxxxxxxxxxxxxx; Masami Hiramatsu
> > > <masami.hiramatsu@xxxxxxxxxx>;
> > > > Jassi Brar <jaswinder.singh@xxxxxxxxxx>;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> > > > linux-kernel@xxxxxxxxxxxxxxx; Abylay Ospan <aospan@xxxxxxxx>
> > > > Subject: Re: [PATCH v3] media: dvb-frontends: add Socionext SC1501A ISDB-S/T
> > > > demodulator driver
> > > >
> > > > Em Mon, 9 Jul 2018 11:04:36 +0900
> > > > "Katsuhiro Suzuki" <suzuki.katsuhiro@xxxxxxxxxxxxx> escreveu:
> > > >
> > > > > Hello Mauro,
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: linux-media-owner@xxxxxxxxxxxxxxx
> <linux-media-owner@xxxxxxxxxxxxxxx>
> > > > On
> > > > > > Behalf Of Mauro Carvalho Chehab
> > > > > > Sent: Friday, July 6, 2018 8:16 PM
> > > > > > To: Suzuki, Katsuhiro/éæ åå <suzuki.katsuhiro@xxxxxxxxxxxxx>
> > > > > > Cc: linux-media@xxxxxxxxxxxxxxx; Masami Hiramatsu
> > > > > <masami.hiramatsu@xxxxxxxxxx>;
> > > > > > Jassi Brar <jaswinder.singh@xxxxxxxxxx>;
> > > > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> > > > > > linux-kernel@xxxxxxxxxxxxxxx; Abylay Ospan <aospan@xxxxxxxx>
> > > > > > Subject: Re: [PATCH v3] media: dvb-frontends: add Socionext SC1501A ISDB-S/T
> > > > > > demodulator driver
> > > > > >
> > > > > > Em Fri, 6 Jul 2018 15:04:08 +0900
> > > > > > "Katsuhiro Suzuki" <suzuki.katsuhiro@xxxxxxxxxxxxx> escreveu:
> > > > > >
> > > > > > > Here is the log of dvb-fe-tool on my environment.
> > > > > > >
> > > > > > > --------------------
> > > > > > > # ./utils/dvb/.libs/dvb-fe-tool -d isdbs
> > > > > > > Changing delivery system to: ISDBS
> > > > > > > ERROR FE_SET_VOLTAGE: Unknown error 524
> > > > > >
> > > > > > Hmm... ENOTSUPP. Doesn't the device supposed to be able to power on the
> > > > > > LNBf?
> > > > >
> > > > > Ah, maybe it's not implemented yet in Helene driver.
> > > >
> > > > That depends on how the hardware works. On some hardware, the
> > > > LNBf power supply and control is at the demod; on others, it is
> > > > supported by a separate chipset. See, for example, isl642.c for
> > > > an example of such external hardware.
> > > >
> > > > I don't know much about ISDB-S, but, as far as what was
> > > > implemented on v4l-utils dvb-sat.c for Japan 110BS/CS LNBf,
> > > > the LNBf voltage is not used to switch the polarity.
> > > >
> > > > So, the control here is simpler than on DVB-S/S2, as the only
> > > > control is either to send 18V to power on the LNBf/Dish, or
> > > > zero in order to save power.
> > > >
> > >
> > > Thank you, I misunderstood about LNB. I checked circuit of evaluation
> > > board, the board has discrete LNB IC (ST micro LNBH29) for supplying
> > > voltage to Helene. This IC is controlled by I2C.
> > >
> > > The standard (ARIB STD-B21) says DC 15V power is needed to drive the
> > > converter (BS freq -> BS-IF freq) of BS dish antenna. This power
> > > can be supplied via antenna line.
> > >
> > > It seems,
> > > LNBH29 --(LNB_PWR)--> Helene --> BS antenna
> > >
> > > I don't know enough about Helene, but it maybe supply 15V power to
> > > converter of BS dish via antenna line if it receive 15V LNB_PWR...
> > >
> > >
> > > I don't have idea about controlling this IC. Should I write some
> > > driver for LNBH29, and pass the phandle to demodulator via device
> > > tree??
> > >
> > >
> > > > >
> > > > >
> > > > > >
> > > > > > Anyway, I changed the error print message to be clearer, displaying
> > > > > > instead:
> > > > > >
> > > > > > ERROR FE_SET_VOLTAGE: driver doesn't support it!
> > > > > >
> > > > >
> > > > > It's nice for users. Thanks!
> > > > >
> > > > >
> > > > > > >
> > > > > > > # ./utils/dvb/.libs/dvb-fe-tool
> > > > > > > Device Socionext SC1501A (/dev/dvb/adapter0/frontend0) capabilities:
> > > > > > > CAN_FEC_AUTO
> > > > > > > CAN_GUARD_INTERVAL_AUTO
> > > > > > > CAN_HIERARCHY_AUTO
> > > > > > > CAN_INVERSION_AUTO
> > > > > > > CAN_QAM_AUTO
> > > > > > > CAN_TRANSMISSION_MODE_AUTO
> > > > > > > DVB API Version 5.11, Current v5 delivery system: ISDBS
> > > > > > > Supported delivery systems:
> > > > > > > [ISDBS]
> > > > > > > ISDBT
> > > > > > > Frequency range for the current standard:
> > > > > > > From: 470 MHz
> > > > > > > To: 2.07 GHz
> > > > > > > Step: 25.0 kHz
> > > > > > > Symbol rate ranges for the current standard:
> > > > > > > From: 0Bauds
> > > > > > > To: 0Bauds
> > > > > >
> > > > > > That seems a driver issue. The ISDB-S ops.info should be
> > > > > > filling both symbol_rate_min and symbol_rate_max.
> > > > > >
> > > > > > I suspect that both should be filled with 28860000.
> > > > > >
> > > > > > The dvb_frontend.c core might hardcode it, but, IMHO,
> > > > > > it is better to keep those information inside the
> > > > > > tuner/frontend ops.info.
> > > > > >
> > > > >
> > > > > Indeed, thank you for reviewing. I fixed my driver. It seems works fine.
> > > > >
> > > > > ----
> > > > > # utils/dvb/.libs/dvb-fe-tool -a 0
> > > > > Device Socionext SC1501A (/dev/dvb/adapter0/frontend0) capabilities:
> > > > > CAN_FEC_AUTO
> > > > > CAN_GUARD_INTERVAL_AUTO
> > > > > CAN_HIERARCHY_AUTO
> > > > > CAN_INVERSION_AUTO
> > > > > CAN_QAM_AUTO
> > > > > CAN_TRANSMISSION_MODE_AUTO
> > > > > DVB API Version 5.11, Current v5 delivery system: ISDBS
> > > > > Supported delivery systems:
> > > > > [ISDBS]
> > > > > ISDBT
> > > > > Frequency range for the current standard:
> > > > > From: 470 MHz
> > > > > To: 2.07 GHz
> > > > > Step: 25.0 kHz
> > > > > Symbol rate ranges for the current standard:
> > > > > From: 28.9 MBauds
> > > > > To: 28.9 MBauds
> > > > > SEC: set voltage to OFF
> > > > > ERROR FE_SET_VOLTAGE: Operation not permitted
> > > > > ----
> > > >
> > > > That sounds ok.
> > > >
> > > > >
> > > > >
> > > > > > > SEC: set voltage to OFF
> > > > > > > ERROR FE_SET_VOLTAGE: Operation not permitted
> > > > > > >
> > > > > > >
> > > > > > > # ./utils/dvb/.libs/dvb-fe-tool -d isdbt
> > > > > > > Changing delivery system to: ISDBT
> > > > > > > ERROR FE_SET_VOLTAGE: Unknown error 524
> > > > > > >
> > > > > > > # ./utils/dvb/.libs/dvb-fe-tool
> > > > > > > Device Socionext SC1501A (/dev/dvb/adapter0/frontend0) capabilities:
> > > > > > > CAN_FEC_AUTO
> > > > > > > CAN_GUARD_INTERVAL_AUTO
> > > > > > > CAN_HIERARCHY_AUTO
> > > > > > > CAN_INVERSION_AUTO
> > > > > > > CAN_QAM_AUTO
> > > > > > > CAN_TRANSMISSION_MODE_AUTO
> > > > > > > DVB API Version 5.11, Current v5 delivery system: ISDBT
> > > > > > > Supported delivery systems:
> > > > > > > ISDBS
> > > > > > > [ISDBT]
> > > > > > > Frequency range for the current standard:
> > > > > > > From: 470 MHz
> > > > > > > To: 2.07 GHz
> > > > > > > Step: 25.0 kHz
> > > > > >
> > > > > > The rest looks OK for me.
> > > > > >
> > > > > > > > > For example, Helene uses these info for only Ter or Sat freq ranges:
> > > > > > > > >
> > > > > > > > > .name = "Sony HELENE Ter tuner",
> > > > > > > > > .frequency_min_hz = 1 * MHz,
> > > > > > > > > .frequency_max_hz = 1200 * MHz,
> > > > > > > > > .frequency_step_hz = 25 * kHz,
> > > > > > > > >
> > > > > > > > > .name = "Sony HELENE Sat tuner",
> > > > > > > > > .frequency_min_hz = 500 * MHz,
> > > > > > > > > .frequency_max_hz = 2500 * MHz,
> > > > > > > > > .frequency_step_hz = 1 * MHz,
> > > > > > > > >
> > > > > > > > > Is this better to add new info for both system?
> > > > > > > > >
> > > > > > > > > .name = "Sony HELENE Sat/Ter tuner",
> > > > > > > > > .frequency_min_hz = 1 * MHz,
> > > > > > > > > .frequency_max_hz = 2500 * MHz,
> > > > > > > > > .frequency_step_hz = 25 * kHz, // Is this
> correct...?
> > > > > > > >
> > > > > > > > That is indeed a very good question, and maybe a reason why we
> > > > > > > > may need other approaches.
> > > > > > > >
> > > > > > > > See, if the tuner is capable of tuning from 1 MHz to 2500 MHz,
> > > > > > > > the frequency range should be ok. It would aget_frontend_algoctually
> be
> > > > > pretty
> > > > > > cool
> > > > > > > > to use a tuner with such wide range for SDR, if the hardware supports
> > > > > > > > raw I/Q collect :-D
> > > > > > > >
> > > > > > > > The frequency step is a different issue. If the tuner driver uses
> > > > > > > > DVBFE_ALGO_SW (e. g. if ops.get_frontend_algo() returns it, or if
> > > > > > > > this function is not defined), then the step will be used to adjust
> > > > > > > > the zigzag interactions. If it is too small, the tuning will lose
> > > > > > > > channels if the signal is not strong.
> > > > > > > >
> > > > > > >
> > > > > > > Thank you for describing. It's difficult problem...
> > > > > >
> > > > > > I double-checked the implementation. We don't need to worry about
> > > > > > zigzag, provided that the ISDB-S implementation at the core is correct.
> > > > > >
> > > > > > For satellite/cable standards, the zigzag logic takes the symbol
> > > > > > rate into account, and not the stepsize:
> > > > > >
> > > > > > case SYS_DVBS:
> > > > > > case SYS_DVBS2:
> > > > > > case SYS_ISDBS:
> > > > > > case SYS_TURBO:
> > > > > > case SYS_DVBC_ANNEX_A:
> > > > > > case SYS_DVBC_ANNEX_C:
> > > > > > fepriv->min_delay = HZ / 20;
> > > > > > fepriv->step_size = c->symbol_rate / 16000;
> > > > > > fepriv->max_drift = c->symbol_rate / 2000;
> > > > > > break;
> > > > > >
> > > > > > For terrestrial standards, it uses the stepsize:
> > > > > >
> > > > > > case SYS_DVBT:
> > > > > > case SYS_DVBT2:
> > > > > > case SYS_ISDBT:
> > > > > > case SYS_DTMB:
> > > > > > fepriv->min_delay = HZ / 20;
> > > > > > fepriv->step_size =
> dvb_frontend_get_stepsize(fe) *
> > > > 2;
> > > > > > fepriv->max_drift =
> (dvb_frontend_get_stepsize(fe)
> > > *
> > > > 2)
> > > > > +
> > > > > > 1;
> > > > > > break;
> > > > > >
> > > > > > So, having a value of 25 kHz there won't affect the zigzag algorithm
> > > > > > for ISDB-S, as it will be used only for ISDB-T.
> > > > > >
> > > > >
> > > > > Thank you for checking and describing. I checked it too.
> > > > >
> > > > > Default value is fine as you said, and we can use get_tune_settings()
> > > > > callback if we face the problem or need different settings for each
> > > > > delivery systems in the future.
> > > > >
> > > > > /* get frontend-specific tuning settings */
> > > > > memset(&fetunesettings, 0, sizeof(struct
> > > dvb_frontend_tune_settings));
> > > > > if (fe->ops.get_tune_settings && (fe->ops.get_tune_settings(fe,
> > > > > &fetunesettings) == 0)) {
> > > > > fepriv->min_delay = (fetunesettings.min_delay_ms * HZ) /
> 1000;
> > > > > fepriv->max_drift = fetunesettings.max_drift;
> > > > > fepriv->step_size = fetunesettings.step_size;
> > > > > } else {
> > > > > /* default values */
> > > > > ...
> > > >
> > > > Sure.
> > > >
> > > > >
> > > > >
> > > > > > > > In the specific case of helene, it doesn't have a get_frontend_algo,
> > > > > > > > so it will use the step frequency.
> > > > > > > >
> > > > > > > > I'm not sure how to solve this issue. Maybe Abylay may shed a light
> > > > > > > > here, if helene does sigzag in hardware or not.
> > > > > > > >
> > > > > > >
> > > > > > > As far as I know, Helene does not have automatic scan mechanism in
> > > > > > > hardware.
> > > > > >
> > > > > > Ok, so the driver is doing the right thing here.
> > > > > >
> > > > > > > > If it does in hardware, you could add a get_frontend_algo() routine
> > > > > > > > at helene driver and return DVBFE_ALGO_HW. The tuning zigzag software
> > > > > > > > algorithm in the Kernel will stop, as it will rely at the hardware.
> > > > > > > >
> > > > > > > > Please notice that, if the hardware doesn't do zigzag itself, this
> > > > > > > > will make it lose channels. On the other hand, if the hardware does
> > > > > > > > have sigzag, changing to DVBFE_ALGO_HW will speedup tuning, as the
> > > > > > > > Kernel won't try to do sigzag itself.
> > > > > > > >
> > > > > > >
> > > > > > > ISDB-T uses 6MHz bandwidth per channel (in Japan), ISDB-S for
> > > > > > > BS/CS110 uses 38.36MHz bandwidth. Maybe 1MHz zigzag step is large for
> > > > > > > ISDB-T system and 25kHz is small for ISDB-S system.
> > > > > >
> > > > > > Yeah, but, after double-checking the logic, for ISDB-S, it will
> > > > > > use:
> > > > > >
> > > > > > c->symbol_rate = 28860000;
> > > > > > c->rolloff = ROLLOFF_35;
> > > > > > c->bandwidth_hz = c->symbol_rate / 100 * 135;
> > > > > >
> > > > > > That would actually set the ISDB-S channel separation to 38.961 MHz.
> > > > > >
> > > > > > By setting symbol_rate like that, the zigzag for ISDB-S will
> > > > > > be defined by:
> > > > > >
> > > > > > fepriv->step_size = c->symbol_rate / 16000; /* 38.961MHz / 16000
> =
> > > > > .002435
> > > > > > - e. g. steps of ~25 kHz */
> > > > > > fepriv->max_drift = c->symbol_rate / 2000; /* 38.961MHz / 2000
> =
> > > > > .0194805
> > > > > > - e. g. max drift of ~195 kHz */
> > > > > >
> > > > > > Funny enough, it will be using about 25 kHz as step size for ISDB-S.
> > > > > >
> > > > > > I have no idea if the ISDB-S standard defines the zigzag logic,
> > > > > > but I would be expecting a higher value for it. So, perhaps
> > > > > > the ISDB-S zigzag could be optimized.
> > > > > >
> > > > > > Thanks,
> > > > > > Mauro
> > > > >
> > > > > Hmm, interesting. I don't know zigzag for ISDB-S too, sorry...
> > > > >
> > > > > Anyway, I don't worry about that. I said in above, we can use
> > > > > get_tune_settings() for fine tuning.
> > > > >
> > > > >
> > > > > Regards,
> > > > > --
> > > > > Katsuhiro Suzuki
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > Thanks,
> > > > Mauro
> > >
> >
> >
> >
>
>
>
>
> Cheers,
> Mauro

Next message: Saeed Mahameed: "Re: [PATCH net-next] net/mlx5: fix an unused-function warning"
Previous message: danieladrian832: "Letter From General Lori Robinson"
In reply to: Mauro Carvalho Chehab: "Re: [PATCH v3] media: dvb-frontends: add Socionext SC1501A ISDB-S/T demodulator driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]