[PATCH v6 0/2] cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver

[Taniya Das]

[v6]
 * Renamed match table 'qcom_cpufreq_hw_match'.
 * Renamed 'qcom_read_lut' to 'qcom_cpufreq_hw_read_lut'.
 * Updated the logic to check for related CPUs at the beginning of the
   'qcom_cpu_resources_init'.
 * Use devm_ioremap_resource instead of devm_ioremap.
 * Update the use of of_node_put to handle error conditions.
 * Use policy->cached_resolved_idx in fast switch callback.
 * Keep precalculated offsets 'reg_bases'.
 * XO clock is taken from Device tree.
 * Update documentation binding for clocks/clock-names.
 * Minor comments in Kconfig.arm.
 * Comments to move dev_info to dev_dbg.

[v5]
  * Remove mapping different register regions of perf/lut/enable,
    instead map the entire HW region.
  * Add reg_offset/cpufreq_qcom_std_offsets to be supplied as device data.
  * Check of src == 0 during lut read.
  * Add of_node_put(cpu_np) in qcom_get_related_cpus
  * Update the qcom_cpu_resources_init for register offset data,
    and cleanup the related cpus to keep a single copy of CPUfreq.
  * Replace FW with HW, update Kconfig, rename filename qcom-cpufreq-hw.c
  * Update the documentation binding to reflect the changes of mapping the
  * entire HW region.

[v4]
  * Fixed console messages as per comments.
  * Return error from qcom_resources_init()
    in the cases where failed to get frequency domain.
  * Rename cpu_dev to cpu_np in qcom_resources_init,
    qcom_get_related_cpus(). Also use temp variable freq_np in
    qcom_get_related_cpus().
  * Update qcom_cpufreq_fw_get() to use the policy data to incoporate
    the hotplug use case.
  * Update code to use of fast_switching.
  * Check for !c->max_cores instead of cpumask_empty in
    qcom_get_related_cpus().
  * Update the logic of assigning 'c' to qcom_freq_domain_map[cpu].

 [v3]
  * Remove index check from 'qcom_cpufreq_fw_target_index'.
  * Update the Documentation binding to add the platform specific properties in
    the CPU nodes, node name "qcom,freq-domain".
  * Update return value to '0' from -ENODEV from 'qcom_cpufreq_fw_get'.
  * Update the logic for boost frequency to use local variables instead of
    cpufreq driver data in 'qcom_read_lut'.
  * Update the logic in 'qcom_get_related_cpus' to find the related cpus.
  * Update the reg-names to remove "_base" and also update the binding with the
    description of these registers.
  * Update the logic in 'qcom_resources_init' to address the new device tree
    notation of handling the frequency domain phandles.

 [v2]
 * Fixed the alignment issues in "qcom_cpufreq_fw_target_index" for dev_err and
   also for "qcom_cpu_resources_init".
 * Removed ret = 0 from qcom_get_related_cpus and added to check for
   cpu_mask_empty to return -ENOENT.
 * Fixes qcom_cpu_resources_init function
   * Remove initialization of 'index'
   * Check for valid 'c'
 * Removed initialization of 'prev_cc' from 'qcom_read_lut'.

Taniya Das (2):
  dt-bindings: cpufreq: Introduce QCOM CPUFREQ Firmware bindings
  cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver

 .../bindings/cpufreq/cpufreq-qcom-hw.txt           | 172 ++++++++++
 drivers/cpufreq/Kconfig.arm                        |  11 +
 drivers/cpufreq/Makefile                           |   1 +
 drivers/cpufreq/qcom-cpufreq-hw.c                  | 348 +++++++++++++++++++++
 4 files changed, 532 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
 create mode 100644 drivers/cpufreq/qcom-cpufreq-hw.c

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.