Re: [PATCH V3 11/16] cpufreq: dt: Pass regulator name to the OPP core
From: Geert Uytterhoeven
Date: Wed Jul 18 2018 - 03:10:08 EST
Hi Viresh,
On Wed, Jul 18, 2018 at 7:50 AM Viresh Kumar <viresh.kumar@xxxxxxxxxx> wrote:
> On 17-07-18, 09:46, Geert Uytterhoeven wrote:
> > CC device-tree folks
> >
> > Replying to an old email, because that's the most accurate reference I
> > could find.
> >
> > On Tue, Feb 9, 2016 at 6:06 AM Viresh Kumar <viresh.kumar@xxxxxxxxxx> wrote:
> > > OPP core can handle the regulators by itself, and but it needs to know
> > > the name of the regulator to fetch. Add support for that.
> > >
> > > Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
> > > ---
> > > drivers/cpufreq/cpufreq-dt.c | 46 ++++++++++++++++++++++++++++++++++++++++++++
> > > 1 file changed, 46 insertions(+)
> > >
> > > diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
> > > index 4c9f8a828f6f..2af75f8088bb 100644
> > > --- a/drivers/cpufreq/cpufreq-dt.c
> > > +++ b/drivers/cpufreq/cpufreq-dt.c
> >
> > > @@ -119,6 +120,30 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
> > > return ret;
> > > }
> > >
> > > +/*
> > > + * An earlier version of opp-v1 bindings used to name the regulator
> > > + * "cpu0-supply", we still need to handle that for backwards compatibility.
> > > + */
> > > +static const char *find_supply_name(struct device *dev, struct device_node *np)
> > > +{
> > > + struct property *pp;
> > > + int cpu = dev->id;
> > > +
> > > + /* Try "cpu0" for older DTs */
> > > + if (!cpu) {
> > > + pp = of_find_property(np, "cpu0-supply", NULL);
> > > + if (pp)
> > > + return "cpu0";
> > > + }
> > > +
> > > + pp = of_find_property(np, "cpu-supply", NULL);
> > > + if (pp)
> > > + return "cpu";
> >
> > Despite the existence of lots of users of these properties, I couldn't find
> > both the "earlier version" and the "current version" of the opp-v1 bindings
> > documenting the "cpu0-supply" and "cpu-supply" properties?
>
> They are part of the device nodes and don't fall under the
> jurisdiction of OPP tables and so aren't defined there. We rely on the
> "<name>-supply" property from the regulator bindings for the devices.
>
> > Even for opp-v2, they are not documented in
> > Documentation/devicetree/bindings/opp/opp.txt, but cpu-supply is used in
> > the examples?
>
> Same reasoning here as well.
Right, they are part of the cpu nodes, not of the operating-points properties
(which are part of the cpu nodes) or the opp_table nodes (for v2).
> > Can you please document these properties?
>
> I don't think we need to, do we ?
IMHO they should be documented somewhere, with a link to
Documentation/devicetree/bindings/regulator/regulator.txt.
How else can a DTS writer know he/she needs them?
Without cpu-supply (and clock!) properties, cpufreq can't work.
Candidates:
- Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt
This has operating points without clocks nor cpu-supply, but with
clock-latency (for which clock? ;-)
- Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt
Again, operating points without clocks nor cpu-supply, but with
clock-latency.
Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds