[PATCH 5/9] scsi: hisi_sas: relocate some common code for v3 hw
From: John Garry
Date: Wed Jul 18 2018 - 10:17:06 EST
From: Xiaofei Tan <tanxiaofei@xxxxxxxxxx>
Much code of PM suspend function also exists in soft reset function. This
is not concise. So, this patch relocates the common code of these two
functions to a separate function.
Signed-off-by: Xiaofei Tan <tanxiaofei@xxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 50 ++++++++++++++++++----------------
1 file changed, 27 insertions(+), 23 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 70a6aa2..3577843 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -210,6 +210,8 @@
#define AXI_MASTER_CFG_BASE (0x5000)
#define AM_CTRL_GLOBAL (0x0)
+#define AM_CTRL_SHUTDOWN_REQ_OFF 0
+#define AM_CTRL_SHUTDOWN_REQ_MSK (0x1 << AM_CTRL_SHUTDOWN_REQ_OFF)
#define AM_CURR_TRANS_RETURN (0x150)
#define AM_CFG_MAX_TRANS (0x5010)
@@ -1976,11 +1978,11 @@ static void phy_get_events_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
}
-static int soft_reset_v3_hw(struct hisi_hba *hisi_hba)
+static int disable_host_v3_hw(struct hisi_hba *hisi_hba)
{
struct device *dev = hisi_hba->dev;
+ u32 status, reg_val;
int rc;
- u32 status;
interrupt_disable_v3_hw(hisi_hba);
hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0x0);
@@ -1990,14 +1992,32 @@ static int soft_reset_v3_hw(struct hisi_hba *hisi_hba)
mdelay(10);
- hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE + AM_CTRL_GLOBAL, 0x1);
+ reg_val = hisi_sas_read32(hisi_hba, AXI_MASTER_CFG_BASE +
+ AM_CTRL_GLOBAL);
+ reg_val |= AM_CTRL_SHUTDOWN_REQ_MSK;
+ hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE +
+ AM_CTRL_GLOBAL, reg_val);
/* wait until bus idle */
rc = hisi_sas_read32_poll_timeout(AXI_MASTER_CFG_BASE +
AM_CURR_TRANS_RETURN, status,
status == 0x3, 10, 100);
if (rc) {
- dev_err(dev, "axi bus is not idle, rc = %d\n", rc);
+ dev_err(dev, "axi bus is not idle, rc=%d\n", rc);
+ return rc;
+ }
+
+ return 0;
+}
+
+static int soft_reset_v3_hw(struct hisi_hba *hisi_hba)
+{
+ struct device *dev = hisi_hba->dev;
+ int rc;
+
+ rc = disable_host_v3_hw(hisi_hba);
+ if (rc) {
+ dev_err(dev, "soft reset: disable host failed rc=%d\n", rc);
return rc;
}
@@ -2456,9 +2476,8 @@ static int hisi_sas_v3_suspend(struct pci_dev *pdev, pm_message_t state)
struct hisi_hba *hisi_hba = sha->lldd_ha;
struct device *dev = hisi_hba->dev;
struct Scsi_Host *shost = hisi_hba->shost;
- u32 device_state, status;
+ u32 device_state;
int rc;
- u32 reg_val;
if (!pdev->pm_cap) {
dev_err(dev, "PCI PM not supported\n");
@@ -2471,25 +2490,10 @@ static int hisi_sas_v3_suspend(struct pci_dev *pdev, pm_message_t state)
scsi_block_requests(shost);
set_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
flush_workqueue(hisi_hba->wq);
- /* disable DQ/PHY/bus */
- interrupt_disable_v3_hw(hisi_hba);
- hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0x0);
- hisi_sas_kill_tasklets(hisi_hba);
- hisi_sas_stop_phys(hisi_hba);
-
- reg_val = hisi_sas_read32(hisi_hba, AXI_MASTER_CFG_BASE +
- AM_CTRL_GLOBAL);
- reg_val |= 0x1;
- hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE +
- AM_CTRL_GLOBAL, reg_val);
-
- /* wait until bus idle */
- rc = hisi_sas_read32_poll_timeout(AXI_MASTER_CFG_BASE +
- AM_CURR_TRANS_RETURN, status,
- status == 0x3, 10, 100);
+ rc = disable_host_v3_hw(hisi_hba);
if (rc) {
- dev_err(dev, "axi bus is not idle, rc = %d\n", rc);
+ dev_err(dev, "PM suspend: disable host failed rc=%d\n", rc);
clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
clear_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags);
scsi_unblock_requests(shost);
--
1.9.1