[PATCHv7 0/9] Add Intel Stratix10 FPGA manager and service layer

[richard . gong]

From: Richard Gong <richard.gong@xxxxxxxxx>

This is the 7th submission of Intel stratix10 service layer patches. This
submission includes one additional patch for supporting remote status update,
the second Stratix10 service layer client. Intel Stratix10 FPGA manager,
which is 1st Stratix10 service layer client, is included in this submission. 

Stratix10 service layer patches have been reviewed internally by Alan Tull
and other colleagues at Intel.

Some features of the Intel Stratix10 SoC require a level of privilege
higher than the kernel is granted. Such secure features include
FPGA programming. In terms of the ARMv8 architecture, the kernel runs
at Exception Level 1 (EL1), access to the features requires
Exception Level 3 (EL3).

The Intel Stratix10 service layer provides an in kernel API for drivers to
request access to the secure features. The requests are queued and
processed one by one. ARMâs SMCCC is used to pass the execution of the
requests on to a secure monitor (EL3).

Later the Intel Stratix10 service layer driver will be extended to provide
services for QSPI, Crypto and warm reset.

v2: add patches for FPGA manager, FPGA manager binding, dts and defconfig
    remove intel-service subdirectory and intel-service.h, move intel-smc.h
    and intel-service.c to driver/misc subdirectory
    remove global variables
    change service layer driver be 'default n'
    correct SPDX markers
    add timeout for do..while() loop
    add kernel-doc for the functions and structs, correct multiline comments
    replace kfifo_in/kfifo_out with kfifo_in_spinlocked/kfifo_out_spinlocked
    rename struct intel_svc_data (at client header) to intel_svc_client_msg
    rename struct intel_svc_private_mem to intel_svc_data
    other corrections/changes from Intel internal code reviews
v3: change all exported functions with "intel_svc_" as the prefix
    increase timeout values for claiming back submitted buffer(s)
    rename struct intel_command_reconfig_payload to
    struct intel_svc_command_reconfig_payload
    add pr_err() to provide the error return value
    change to put fpga_mgr node under firmware/svc node
    change to FPGA manager to align the update of service client APIs, and the
    update of fpga_mgr device node
    Other corrections/changes
v4: s/intel/stratix10/ on some variables, structs, functions, and file names
    intel-service.c -> stratix10-svc.c
    intel-smc.h -> stratix10-smc.h
    intel-service-client.h -> stratix10-svc-client.h
    remove non-kernel-doc formatting
    s/fpga-mgr@0/fpga-mgr/ to remove unit_address at fpga_mgr node
    add Rob's Reviewed-by
    add Richard's signed-off-by
v5: add a new API statix10_svc_done() which is called by service client
    when client request is completed or error occurs during request
    process. Which allows service layer to free its resources.
    remove dummy client from service layer client header and service layer
    source file.
    add Rob's Reviewed-by
    add a new file stratix10-svc.rst and add that to driver-api/index.rst
    kernel-doc fixes
v6: replace kthread_create_on_cpu() with kthread_create_on_node()
    extend stratix_svc_send() to support service client which doesn't use
    memory allocated by service layer
    add S10_RECONFIG_TIMEOUT
    rename s/S10_BUF_TIMEOUT/S10_BUFFER_TIMEOUT/
    fix service layer and FPGA manager Klocwork errors
v7: add remote status update client support
    s/pr_debug/dev_dbg, s/dev_info/dev_dbg
    add unlock buffer if s10_svc_send_msg() fails
    add release channel if fpga_mgr_create() fails
    handle invalid pointer at svc if the client passed an invalid name

Alan Tull (3):
  dt-bindings: fpga: add Stratix10 SoC FPGA manager binding
  arm64: dts: stratix10: add fpga manager and region
  fpga: add intel stratix10 soc fpga manager driver

Richard Gong (6):
  dt-bindings, firmware: add Intel Stratix10 service layer binding
  arm64: dts: stratix10: add stratix10 service driver binding to base
    dtsi
  misc: add Intel Stratix10 service layer driver
  defconfig: enable fpga and service layer
  Documentation: driver-api: add stratix10 service layer
  misc: add remote status update client support

 .../bindings/firmware/intel,stratix10-svc.txt      |   57 ++
 .../bindings/fpga/intel-stratix10-soc-fpga-mgr.txt |   17 +
 Documentation/driver-api/index.rst                 |    1 +
 Documentation/driver-api/stratix10-svc.rst         |   32 +
 arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi  |   33 +
 arch/arm64/configs/defconfig                       |    7 +
 drivers/fpga/Kconfig                               |    6 +
 drivers/fpga/Makefile                              |    1 +
 drivers/fpga/stratix10-soc.c                       |  558 ++++++++++
 drivers/misc/Kconfig                               |   12 +
 drivers/misc/Makefile                              |    1 +
 drivers/misc/stratix10-smc.h                       |  313 ++++++
 drivers/misc/stratix10-svc.c                       | 1067 ++++++++++++++++++++
 include/linux/stratix10-svc-client.h               |  217 ++++
 14 files changed, 2322 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
 create mode 100644 Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
 create mode 100644 Documentation/driver-api/stratix10-svc.rst
 create mode 100644 drivers/fpga/stratix10-soc.c
 create mode 100644 drivers/misc/stratix10-smc.h
 create mode 100644 drivers/misc/stratix10-svc.c
 create mode 100644 include/linux/stratix10-svc-client.h

-- 
2.7.4