Re: [PATCH V4 2/2] mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux â

From: Peter Rosin
Date: Fri Jul 20 2018 - 10:29:59 EST


On 2018-07-20 10:11, Mircea Caprioru wrote:
> This patch adds basic support for Analog Device ADGS1408/09 SPI mux
> controller.
>
> The device is probed and set to a disabled state. It uses the new mux
> controller framework.
>
> Signed-off-by: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
> ---
> Changelog V3 -> V4
> - named enum to adgs1408_chip_id
> - added .data with id enum values
> - added chip id verification for of_device_get_match_data
>
> drivers/mux/Kconfig | 10 ++++
> drivers/mux/Makefile | 2 +
> drivers/mux/adgs1408.c | 132 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 144 insertions(+)
> create mode 100644 drivers/mux/adgs1408.c
>
> diff --git a/drivers/mux/Kconfig b/drivers/mux/Kconfig
> index 6241678e99af..7659d6c5f718 100644
> --- a/drivers/mux/Kconfig
> +++ b/drivers/mux/Kconfig
> @@ -21,6 +21,16 @@ config MUX_ADG792A
> To compile the driver as a module, choose M here: the module will
> be called mux-adg792a.
>
> +config MUX_ADGS1408
> + tristate "Analog Devices ADGS1408/ADGS1409 Multiplexers"
> + depends on SPI
> + help
> + ADGS1408 8:1 multiplexer and ADGS1409 double 4:1 multiplexer
> + switches.
> +
> + To compile the driver as a module, choose M here: the module will
> + be called mux-adgs1408.
> +
> config MUX_GPIO
> tristate "GPIO-controlled Multiplexer"
> depends on GPIOLIB || COMPILE_TEST
> diff --git a/drivers/mux/Makefile b/drivers/mux/Makefile
> index c3d883955fd5..6e9fa47daf56 100644
> --- a/drivers/mux/Makefile
> +++ b/drivers/mux/Makefile
> @@ -5,10 +5,12 @@
>
> mux-core-objs := core.o
> mux-adg792a-objs := adg792a.o
> +mux-adgs1408-objs := adgs1408.o
> mux-gpio-objs := gpio.o
> mux-mmio-objs := mmio.o
>
> obj-$(CONFIG_MULTIPLEXER) += mux-core.o
> obj-$(CONFIG_MUX_ADG792A) += mux-adg792a.o
> +obj-$(CONFIG_MUX_ADGS1408) += mux-adgs1408.o
> obj-$(CONFIG_MUX_GPIO) += mux-gpio.o
> obj-$(CONFIG_MUX_MMIO) += mux-mmio.o
> diff --git a/drivers/mux/adgs1408.c b/drivers/mux/adgs1408.c
> new file mode 100644
> index 000000000000..9cc749e10383
> --- /dev/null
> +++ b/drivers/mux/adgs1408.c
> @@ -0,0 +1,132 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * ADGS1408/ADGS1409 SPI MUX driver
> + *
> + * Copyright 2018 Analog Devices Inc.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/mux/driver.h>
> +#include <linux/of_platform.h>
> +#include <linux/property.h>
> +#include <linux/spi/spi.h>
> +
> +#define ADGS1408_SW_DATA (0x01)
> +#define ADGS1408_REG_READ(reg) ((reg) | 0x80)
> +#define ADGS1408_DISABLE (0x00)
> +#define ADGS1408_MUX(state) (((state) << 1) | 1)
> +
> +enum adgs1408_chip_id {
> + ADGS1408 = 1,
> + ADGS1409,
> +};
> +
> +static int adgs1408_spi_reg_write(struct spi_device *spi,
> + u8 reg_addr, u8 reg_data)
> +{
> + u8 tx_buf[2];
> +
> + tx_buf[0] = reg_addr;
> + tx_buf[1] = reg_data;
> +
> + return spi_write_then_read(spi, tx_buf, sizeof(tx_buf), NULL, 0);
> +}
> +
> +static int adgs1408_set(struct mux_control *mux, int state)
> +{
> + struct spi_device *spi = to_spi_device(mux->chip->dev.parent);
> + u8 reg;
> +
> + if (state == MUX_IDLE_DISCONNECT)
> + reg = ADGS1408_DISABLE;
> + else
> + reg = ADGS1408_MUX(state);
> +
> + return adgs1408_spi_reg_write(spi, ADGS1408_SW_DATA, reg);
> +}
> +
> +static const struct mux_control_ops adgs1408_ops = {
> + .set = adgs1408_set,
> +};
> +
> +static int adgs1408_probe(struct spi_device *spi)
> +{
> + struct device *dev = &spi->dev;
> + struct mux_chip *mux_chip;
> + struct mux_control *mux;
> + int ret, idle_state;
> + enum adgs1408_chip_id chip_id;

For bonus points, order this block from longer to shorter lines when you
switch idle_state to s32 (see below).

> +
> + chip_id = (enum adgs1408_chip_id)of_device_get_match_data(dev);
> + if (!chip_id)
> + chip_id = spi_get_device_id(spi)->driver_data;
> +
> + mux_chip = devm_mux_chip_alloc(dev, 1, 0);
> + if (IS_ERR(mux_chip))
> + return PTR_ERR(mux_chip);
> +
> + mux_chip->ops = &adgs1408_ops;
> +
> + ret = adgs1408_spi_reg_write(spi, ADGS1408_SW_DATA, ADGS1408_DISABLE);
> + if (ret < 0)
> + return ret;
> +
> + ret = device_property_read_u32_array(dev, "idle-state",
> + &idle_state,
> + mux_chip->controllers);

I just noticed this, which is a big no-no. 'int *' is not compatible with
'u32 *' since int and u32 are of different size on 64-bit arches. You need
idle_state to be 's32', and you need the cast to avoid warnings.

And, you don't need to read an array. So, please use:

ret = device_property_read_u32(dev, "idle-state", (u32 *)&idle_state);

Sorry for not noticing this earlier.

Cheers,
Peter

> + if (ret < 0)
> + idle_state = MUX_IDLE_AS_IS;
> +
> + mux = mux_chip->mux;
> +
> + if (chip_id == ADGS1408)
> + mux->states = 8;
> + else
> + mux->states = 4;
> +
> + switch (idle_state) {
> + case MUX_IDLE_DISCONNECT:
> + case MUX_IDLE_AS_IS:
> + case 0 ... 7:
> + /* adgs1409 supports only 4 states */
> + if (idle_state < mux->states) {
> + mux->idle_state = idle_state;
> + break;
> + }
> + /* fall through */
> + default:
> + dev_err(dev, "invalid idle-state %d\n", idle_state);
> + return -EINVAL;
> + }
> +
> + return devm_mux_chip_register(dev, mux_chip);
> +}
> +
> +static const struct spi_device_id adgs1408_spi_id[] = {
> + { "adgs1408", ADGS1408 },
> + { "adgs1409", ADGS1409 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(spi, adgs1408_spi_id);
> +
> +static const struct of_device_id adgs1408_of_match[] = {
> + { .compatible = "adi,adgs1408", .data = (void *)ADGS1408, },
> + { .compatible = "adi,adgs1409", .data = (void *)ADGS1409, },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, adgs1408_of_match);
> +
> +static struct spi_driver adgs1408_driver = {
> + .driver = {
> + .name = "adgs1408",
> + .of_match_table = of_match_ptr(adgs1408_of_match),
> + },
> + .probe = adgs1408_probe,
> + .id_table = adgs1408_spi_id,
> +};
> +module_spi_driver(adgs1408_driver);
> +
> +MODULE_AUTHOR("Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("Analog Devices ADGS1408 MUX driver");
> +MODULE_LICENSE("GPL v2");
>