Re: [PATCH v6 6/8] interconnect: qcom: Add msm8916 interconnect provider driver
From: Georgi Djakov
Date: Fri Jul 20 2018 - 10:46:09 EST
Hi Matthias,
On 07/10/2018 02:56 AM, Matthias Kaehlcke wrote:
> Hi,
>
> On Mon, Jul 09, 2018 at 06:51:02PM +0300, Georgi Djakov wrote:
>> Add driver for the Qualcomm interconnect buses found in msm8916 based
>> platforms.
>>
>> Signed-off-by: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
>> ---
>> drivers/interconnect/Kconfig | 5 +
>> drivers/interconnect/Makefile | 1 +
>> drivers/interconnect/qcom/Kconfig | 10 +
>> drivers/interconnect/qcom/Makefile | 2 +
>> drivers/interconnect/qcom/msm8916.c | 499 ++++++++++++++++++++++++++++
>> 5 files changed, 517 insertions(+)
>> create mode 100644 drivers/interconnect/qcom/msm8916.c
>>
[..]
>> +/**
>> + * struct qcom_icc_node - Qualcomm specific interconnect nodes
>> + * @name: the node name used in debugfs
>> + * @links: an array of nodes where we can go next while traversing
>> + * @id: a unique node identifier
>
> nit: move up to keep 'links' and 'num_links' together? Also 'name' and
> 'id' are similar fields, so keeping them together makes sense.
Ok.
>> + * @num_links: the total number of @links
>> + * @port: the offset index into the masters QoS register space
>> + * @buswidth: width of the interconnect between a node and the bus (bytes)
>> + * @ap_owned: the AP CPU does the writing to QoS registers
>> + * @qos_mode: QoS mode for ap_owned resources
>> + * @mas_rpm_id: RPM id for devices that are bus masters
>> + * @slv_rpm_id: RPM id for devices that are bus slaves
>> + * @rate: current bus clock rate in Hz
>> + */
>> +struct qcom_icc_node {
>> + unsigned char *name;
>> + u16 links[MSM8916_MAX_LINKS];
>> + u16 id;
>> + u16 num_links;
>> + u16 port;
>> + u16 buswidth;
>> + bool ap_owned;
>> + enum qcom_qos_mode qos_mode;
>> + int mas_rpm_id;
>> + int slv_rpm_id;
>> + u64 rate;
>> +};
>> +
>> +struct qcom_icc_desc {
>> + struct qcom_icc_node **nodes;
>> + size_t num_nodes;
>> +};
>> +
>> +#define DEFINE_QNODE(_name, _id, _port, _buswidth, _ap_owned, \
>> + _mas_rpm_id, _slv_rpm_id, _qos_mode, \
>> + _numlinks, ...) \
>> + static struct qcom_icc_node _name = { \
>> + .id = _id, \
>> + .name = #_name, \
>
> nit: init fields in same order as parameters.
Ok.
>> + .port = _port, \
>> + .buswidth = _buswidth, \
>> + .qos_mode = _qos_mode, \
>> + .ap_owned = _ap_owned, \
>> + .mas_rpm_id = _mas_rpm_id, \
>> + .slv_rpm_id = _slv_rpm_id, \
>> + .num_links = _numlinks, \
>> + .links = { __VA_ARGS__ }, \
>> + }
>> +
>> +DEFINE_QNODE(mas_video, MASTER_VIDEO_P0, 8, 16, 1, -1, -1, QCOM_QOS_MODE_BYPASS, 2, SNOC_MM_INT_0, SNOC_MM_INT_2);
>> +DEFINE_QNODE(mas_jpeg, MASTER_JPEG, 6, 16, 1, -1, -1, QCOM_QOS_MODE_BYPASS, 2, SNOC_MM_INT_0, SNOC_MM_INT_2);
>> +DEFINE_QNODE(mas_vfe, MASTER_VFE, 9, 16, 1, -1, -1, QCOM_QOS_MODE_BYPASS, 2, SNOC_MM_INT_1, SNOC_MM_INT_2);
>> +DEFINE_QNODE(mas_mdp, MASTER_MDP_PORT0, 7, 16, 1, -1, -1, QCOM_QOS_MODE_BYPASS, 2, SNOC_MM_INT_0, SNOC_MM_INT_2);
>> +DEFINE_QNODE(mas_qdss_bam, MASTER_QDSS_BAM, 11, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, SNOC_QDSS_INT);
>> +DEFINE_QNODE(mas_snoc_cfg, MASTER_SNOC_CFG, 0, 16, 0, 20, -1, QCOM_QOS_MODE_BYPASS, 1, SNOC_QDSS_INT);
>> +DEFINE_QNODE(mas_qdss_etr, MASTER_QDSS_ETR, 10, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, SNOC_QDSS_INT);
>> +DEFINE_QNODE(mm_int_0, SNOC_MM_INT_0, 0, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, SNOC_MM_INT_BIMC);
>> +DEFINE_QNODE(mm_int_1, SNOC_MM_INT_1, 0, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, SNOC_MM_INT_BIMC);
>> +DEFINE_QNODE(mm_int_2, SNOC_MM_INT_2, 0, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, SNOC_INT_0);
>> +DEFINE_QNODE(mm_int_bimc, SNOC_MM_INT_BIMC, 0, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, SNOC_BIMC_1_MAS);
>> +DEFINE_QNODE(snoc_int_0, SNOC_INT_0, 0, 8, 0, 99, 130, QCOM_QOS_MODE_FIXED, 3, SLAVE_QDSS_STM, SLAVE_SYSTEM_IMEM, MNOC_BIMC_MAS);
>> +DEFINE_QNODE(snoc_int_1, SNOC_INT_1, 0, 8, 0, 100, 131, QCOM_QOS_MODE_FIXED, 3, SYSTEM_SLAVE_FAB_APPS, SLAVE_CATS_128, SLAVE_OCMEM_64);
>> +DEFINE_QNODE(snoc_int_bimc, SNOC_INT_BIMC, 0, 8, 0, 101, 132, QCOM_QOS_MODE_FIXED, 1, SNOC_BIMC_0_MAS);
>> +DEFINE_QNODE(snoc_bimc_0_mas, SNOC_BIMC_0_MAS, 0, 8, 0, 3, -1, QCOM_QOS_MODE_FIXED, 1, SNOC_BIMC_0_SLV);
>> +DEFINE_QNODE(snoc_bimc_1_mas, SNOC_BIMC_1_MAS, 0, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, SNOC_BIMC_1_SLV);
>> +DEFINE_QNODE(qdss_int, SNOC_QDSS_INT, 0, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 2, SNOC_INT_0, SNOC_INT_BIMC);
>> +DEFINE_QNODE(bimc_snoc_slv, BIMC_SNOC_SLV, 0, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 2, SNOC_INT_0, SNOC_INT_1);
>> +DEFINE_QNODE(snoc_pnoc_mas, MNOC_BIMC_MAS, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, MNOC_BIMC_SLV);
>
> Shouldn't this be SNOC_PNOC_MAS?
I am sharing these IDs between multiple SoC (with different interconnect
topology) for the case where the same consumer driver is used on
different SoCs. This is to allow a directly reference the ports by the
consumer driver in the case where we are using platform data only. Will
update it, as now we have a patch to allow translation via DT and this
is not a limitation anymore.
>> +DEFINE_QNODE(pnoc_snoc_slv, PNOC_SNOC_SLV, 0, 8, 0, -1, 45, QCOM_QOS_MODE_FIXED, 3, SNOC_INT_0, SNOC_INT_BIMC, SNOC_INT_1);
>> +DEFINE_QNODE(slv_srvc_snoc, SLAVE_SERVICE_SNOC, 0, 8, 0, -1, 29, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_qdss_stm, SLAVE_QDSS_STM, 0, 4, 0, -1, 30, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_imem, SLAVE_SYSTEM_IMEM, 0, 8, 0, -1, 26, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_apss, SYSTEM_SLAVE_FAB_APPS, 0, 4, 0, -1, 20, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_cats_0, SLAVE_CATS_128, 0, 16, 0, -1, 106, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_cats_1, SLAVE_OCMEM_64, 0, 8, 0, -1, 107, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(mas_apss, MASTER_AMPSS_M0, 0, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 3, SLAVE_EBI_CH0, BIMC_SNOC_MAS, SLAVE_AMPSS_L2);
>> +DEFINE_QNODE(mas_tcu0, MASTER_TCU_0, 5, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 3, SLAVE_EBI_CH0, BIMC_SNOC_MAS, SLAVE_AMPSS_L2);
>> +DEFINE_QNODE(mas_tcu1, MASTER_TCU_1, 6, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 3, SLAVE_EBI_CH0, BIMC_SNOC_MAS, SLAVE_AMPSS_L2);
>> +DEFINE_QNODE(mas_gfx, MASTER_GRAPHICS_3D, 2, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 3, SLAVE_EBI_CH0, BIMC_SNOC_MAS, SLAVE_AMPSS_L2);
>> +DEFINE_QNODE(bimc_snoc_mas, BIMC_SNOC_MAS, 0, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, BIMC_SNOC_SLV);
>> +DEFINE_QNODE(snoc_bimc_0_slv, SNOC_BIMC_0_SLV, 0, 8, 0, -1, 24, QCOM_QOS_MODE_FIXED, 1, SLAVE_EBI_CH0);
>> +DEFINE_QNODE(snoc_bimc_1_slv, SNOC_BIMC_1_SLV, 0, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, SLAVE_EBI_CH0);
>> +DEFINE_QNODE(slv_ebi_ch0, SLAVE_EBI_CH0, 0, 8, 0, -1, 0, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_apps_l2, SLAVE_AMPSS_L2, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(snoc_pnoc_slv, MNOC_BIMC_SLV, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_INT_0);
>
> Shouldn't this be SNOC_PNOC_SLV?
>
>> +DEFINE_QNODE(pnoc_int_0, PNOC_INT_0, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 8, PNOC_SNOC_MAS, PNOC_SLV_0, PNOC_SLV_1, PNOC_SLV_2, PNOC_SLV_3, PNOC_SLV_4, PNOC_SLV_8, PNOC_SLV_9);
>> +DEFINE_QNODE(pnoc_int_1, PNOC_INT_1, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_SNOC_MAS);
>> +DEFINE_QNODE(pnoc_m_0, PNOC_M_0, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_INT_0);
>> +DEFINE_QNODE(pnoc_m_1, PNOC_M_1, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_SNOC_MAS);
>> +DEFINE_QNODE(pnoc_s_0, PNOC_SLV_0, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 5, SLAVE_CLK_CTL, SLAVE_TLMM, SLAVE_MSM_TCSR, SLAVE_SECURITY, SLAVE_MSS);
>> +DEFINE_QNODE(pnoc_s_1, PNOC_SLV_1, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 5, SLAVE_IMEM_CFG, SLAVE_CRYPTO_0_CFG, SLAVE_RPM_MSG_RAM, SLAVE_MSM_PDM, SLAVE_PRNG);
>> +DEFINE_QNODE(pnoc_s_2, PNOC_SLV_2, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 5, SLAVE_SPDM, SLAVE_BOOT_ROM, SLAVE_BIMC_CFG, SLAVE_PNOC_CFG, SLAVE_PMIC_ARB);
>> +DEFINE_QNODE(pnoc_s_3, PNOC_SLV_3, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 5, SLAVE_MPM, SLAVE_IPS_CFG, SLAVE_RBCPR_CFG, SLAVE_QDSS_CFG, SLAVE_DEHR_CFG);
>> +DEFINE_QNODE(pnoc_s_4, PNOC_SLV_4, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 3, SLAVE_VENUS_CFG, SLAVE_CAMERA_CFG, SLAVE_DISPLAY_CFG);
>> +DEFINE_QNODE(pnoc_s_8, PNOC_SLV_8, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 3, SLAVE_USB_HS, SLAVE_SDCC_1, SLAVE_BLSP_1);
>> +DEFINE_QNODE(pnoc_s_9, PNOC_SLV_9, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 3, SLAVE_SDCC_4, SLAVE_LPASS, SLAVE_GRAPHICS_3D_CFG);
>> +DEFINE_QNODE(slv_imem_cfg, SLAVE_IMEM_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_crypto_0_cfg, SLAVE_CRYPTO_0_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_msg_ram, SLAVE_RPM_MSG_RAM, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_pdm, SLAVE_MSM_PDM, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_prng, SLAVE_PRNG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_clk_ctl, SLAVE_CLK_CTL, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_mss, SLAVE_MSS, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_tlmm, SLAVE_TLMM, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_tcsr, SLAVE_MSM_TCSR, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_security, SLAVE_SECURITY, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_spdm, SLAVE_SPDM, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_pnoc_cfg, SLAVE_PNOC_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_pmic_arb, SLAVE_PMIC_ARB, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_bimc_cfg, SLAVE_BIMC_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_boot_rom, SLAVE_BOOT_ROM, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_mpm, SLAVE_MPM, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_qdss_cfg, SLAVE_QDSS_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_rbcpr_cfg, SLAVE_RBCPR_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_snoc_cfg, SLAVE_IPS_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>
> Shouldn't this be SLAVE_SNOC_CFG ?
>
>> +DEFINE_QNODE(slv_dehr_cfg, SLAVE_DEHR_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_venus_cfg, SLAVE_VENUS_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_display_cfg, SLAVE_DISPLAY_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_camera_cfg, SLAVE_CAMERA_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_usb_hs, SLAVE_USB_HS, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_sdcc_1, SLAVE_SDCC_1, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_blsp_1, SLAVE_BLSP_1, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_sdcc_2, SLAVE_SDCC_4, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_gfx_cfg, SLAVE_GRAPHICS_3D_CFG, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(slv_audio, SLAVE_LPASS, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
>> +DEFINE_QNODE(mas_blsp_1, MASTER_BLSP_1, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_M_1);
>> +DEFINE_QNODE(mas_spdm, MASTER_SPDM, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_M_0);
>> +DEFINE_QNODE(mas_dehr, MASTER_DEHR, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_M_0);
>> +DEFINE_QNODE(mas_audio, MASTER_LPASS, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_M_0);
>> +DEFINE_QNODE(mas_usb_hs, MASTER_USB_HS, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_M_1);
>> +DEFINE_QNODE(mas_pnoc_crypto_0, MASTER_CRYPTO_CORE0, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_INT_1);
>> +DEFINE_QNODE(mas_pnoc_sdcc_1, MASTER_SDCC_1, 7, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_INT_1);
>> +DEFINE_QNODE(mas_pnoc_sdcc_2, MASTER_SDCC_2, 8, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_INT_1);
>> +DEFINE_QNODE(pnoc_snoc_mas, PNOC_SNOC_MAS, 0, 8, 0, 29, -1, QCOM_QOS_MODE_FIXED, 1, PNOC_SNOC_SLV);
>
> nit: you could consider to group these by NoC and use alphabetical
> order within each block, and also sort msm8916_*_nodes below. Purely
> optional though :)
Ok, will see what i can do.
>
>> +static struct qcom_icc_node *msm8916_snoc_nodes[] = {
>> + &mas_video,
>> + &mas_jpeg,
>> + &mas_vfe,
>> + &mas_mdp,
>> + &mas_qdss_bam,
>> + &mas_snoc_cfg,
>> + &mas_qdss_etr,
>> + &mm_int_0,
>> + &mm_int_1,
>> + &mm_int_2,
>> + &mm_int_bimc,
>> + &snoc_int_0,
>> + &snoc_int_1,
>> + &snoc_int_bimc,
>> + &snoc_bimc_0_mas,
>> + &snoc_bimc_1_mas,
>> + &qdss_int,
>> + &bimc_snoc_slv,
>> + &snoc_pnoc_mas,
>> + &pnoc_snoc_slv,
>> + &slv_srvc_snoc,
>> + &slv_qdss_stm,
>> + &slv_imem,
>> + &slv_apss,
>> + &slv_cats_0,
>> + &slv_cats_1,
>> +};
>> +
>> +static struct qcom_icc_desc msm8916_snoc = {
>> + .nodes = msm8916_snoc_nodes,
>> + .num_nodes = ARRAY_SIZE(msm8916_snoc_nodes),
>> +};
>> +
>> +static struct qcom_icc_node *msm8916_bimc_nodes[] = {
>> + &mas_apss,
>> + &mas_tcu0,
>> + &mas_tcu1,
>> + &mas_gfx,
>> + &bimc_snoc_mas,
>> + &snoc_bimc_0_slv,
>> + &snoc_bimc_1_slv,
>> + &slv_ebi_ch0,
>> + &slv_apps_l2,
>> +};
>> +
>> +static struct qcom_icc_desc msm8916_bimc = {
>> + .nodes = msm8916_bimc_nodes,
>> + .num_nodes = ARRAY_SIZE(msm8916_bimc_nodes),
>> +};
>> +
>> +static struct qcom_icc_node *msm8916_pnoc_nodes[] = {
>> + &snoc_pnoc_slv,
>> + &pnoc_int_0,
>> + &pnoc_int_1,
>> + &pnoc_m_0,
>> + &pnoc_m_1,
>> + &pnoc_s_0,
>> + &pnoc_s_1,
>> + &pnoc_s_2,
>> + &pnoc_s_3,
>> + &pnoc_s_4,
>> + &pnoc_s_8,
>> + &pnoc_s_9,
>> + &slv_imem_cfg,
>> + &slv_crypto_0_cfg,
>> + &slv_msg_ram,
>> + &slv_pdm,
>> + &slv_prng,
>> + &slv_clk_ctl,
>> + &slv_mss,
>> + &slv_tlmm,
>> + &slv_tcsr,
>> + &slv_security,
>> + &slv_spdm,
>> + &slv_pnoc_cfg,
>> + &slv_pmic_arb,
>> + &slv_bimc_cfg,
>> + &slv_boot_rom,
>> + &slv_mpm,
>> + &slv_qdss_cfg,
>> + &slv_rbcpr_cfg,
>> + &slv_snoc_cfg,
>> + &slv_dehr_cfg,
>> + &slv_venus_cfg,
>> + &slv_display_cfg,
>> + &slv_camera_cfg,
>> + &slv_usb_hs,
>> + &slv_sdcc_1,
>> + &slv_blsp_1,
>> + &slv_sdcc_2,
>> + &slv_gfx_cfg,
>> + &slv_audio,
>> + &mas_blsp_1,
>> + &mas_spdm,
>> + &mas_dehr,
>> + &mas_audio,
>> + &mas_usb_hs,
>> + &mas_pnoc_crypto_0,
>> + &mas_pnoc_sdcc_1,
>> + &mas_pnoc_sdcc_2,
>> + &pnoc_snoc_mas,
>> +};
>> +
>> +static struct qcom_icc_desc msm8916_pnoc = {
>> + .nodes = msm8916_pnoc_nodes,
>> + .num_nodes = ARRAY_SIZE(msm8916_pnoc_nodes),
>> +};
>> +
>> +static int qcom_icc_aggregate(struct icc_node *node, u32 avg_bw, u32 peak_bw,
>> + u32 *agg_avg, u32 *agg_peak)
>> +{
>> + *agg_avg += avg_bw;
>> + *agg_peak = max(*agg_peak, peak_bw);
>> +
>> + return 0;
>> +}
>> +
>> +static int qcom_icc_set(struct icc_node *src, struct icc_node *dst,
>> + u32 avg, u32 peak)
>> +{
>> + struct qcom_icc_provider *qp;
>> + struct qcom_icc_node *qn;
>> + struct icc_node *node;
>> + struct icc_provider *provider;
>> + u64 avg_bw = icc_units_to_bps(avg);
>> + u64 peak_bw = icc_units_to_bps(peak);
>> + u64 rate = 0;
>
> Initialization is unnecessary.
Ok.
>> + int ret = 0;
>> +
>> + if (!src)
>> + node = dst;
>> + else
>> + node = src;
>> +
>> + qn = node->data;
>> + provider = node->provider;
>> + qp = to_qcom_provider(node->provider);
>
> nit: you could pass provider instead of node->provider.
Ok.
>> +
>> + /* set bandwidth */
>> + if (qn->ap_owned) {
>> + /* TODO: set QoS */
>> + } else {
>> + /* send message to the RPM processor */
>> + if (qn->mas_rpm_id != -1) {
>> + ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
>> + RPM_BUS_MASTER_REQ,
>> + qn->mas_rpm_id,
>> + avg_bw);
>> + if (ret) {
>> + pr_err("qcom_icc_rpm_smd_send mas error %d\n",
>> + ret);
>> + return ret;
>> + }
>> + }
>> +
>> + if (qn->slv_rpm_id != -1) {
>> + ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
>> + RPM_BUS_SLAVE_REQ,
>> + qn->slv_rpm_id,
>> + avg_bw);
>> + if (ret) {
>> + pr_err("qcom_icc_rpm_smd_send slv error %d\n",
>> + ret);
>> + return ret;
>> + }
>> + }
>> + }
>> +
>> + rate = max(avg_bw, peak_bw);
>
> This looks trivial, however avg_bw is a sum of average bandwidths and
> peak_bw is the max peak bandwidth of all nodes, which is not evident
> in this context. I guess it makes sense since a node that uses it's
> peak bandwdith frequently would have a average bandwidth close to that
> value, which would be reflected in avg_bw.
Yes, i will try to use better naming of variables.
>> +static int qnoc_probe(struct platform_device *pdev)
>> +{
>> + const struct qcom_icc_desc *desc;
>> + struct qcom_icc_node **qnodes;
>> + struct icc_node *node;
>> + struct qcom_icc_provider *qp;
>> + struct resource *res;
>> + struct icc_provider *provider;
>> + size_t num_nodes, i;
>> + int ret;
>> +
>> + /* wait for RPM */
>> + if (!qcom_icc_rpm_smd_available())
>> + return -EPROBE_DEFER;
>> +
>> + desc = of_device_get_match_data(&pdev->dev);
>> + if (!desc)
>> + return -EINVAL;
>> +
>> + qnodes = desc->nodes;
>> + num_nodes = desc->num_nodes;
>> +
>> + qp = devm_kzalloc(&pdev->dev, sizeof(*qp), GFP_KERNEL);
>> + if (!qp)
>> + return -ENOMEM;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + qp->base = devm_ioremap_resource(&pdev->dev, res);
>> + if (IS_ERR(qp->base))
>> + return PTR_ERR(qp->base);
>> +
>> + qp->bus_clk = devm_clk_get(&pdev->dev, "bus_clk");
>> + if (IS_ERR(qp->bus_clk))
>> + return PTR_ERR(qp->bus_clk);
>> +
>> + ret = clk_prepare_enable(qp->bus_clk);
>> + if (ret) {
>> + dev_err(&pdev->dev, "error enabling bus_clk: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + qp->bus_a_clk = devm_clk_get(&pdev->dev, "bus_a_clk");
>> + if (IS_ERR(qp->bus_a_clk))
>
> clk_disable_unprepare(qp->bus_clk);
>
> Same for other error paths.
>
>> + return PTR_ERR(qp->bus_a_clk);
>> +
>> + ret = clk_prepare_enable(qp->bus_a_clk);
>> + if (ret) {
>> + dev_err(&pdev->dev, "error enabling bus_a_clk: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + provider = &qp->provider;
>> + provider->dev = &pdev->dev;
>> + provider->set = &qcom_icc_set;
>> + provider->aggregate = &qcom_icc_aggregate;
>> + INIT_LIST_HEAD(&provider->nodes);
>> + provider->data = qp;
>> +
>> + ret = icc_provider_add(provider);
>> + if (ret) {
>> + dev_err(&pdev->dev, "error adding interconnect provider\n");
>
> clk_disable_unprepare(qp->bus_a_clk);
>
> Same for other error paths.
>
>> + return ret;
>> + }
>> +
>> + for (i = 0; i < num_nodes; i++) {
>> + int ret;
>> + size_t j;
>> +
>> + node = icc_node_create(qnodes[i]->id);
>> + if (IS_ERR(node)) {
>> + ret = PTR_ERR(node);
>> + goto err;
>> + }
>> +
>> + node->name = qnodes[i]->name;
>> + node->data = qnodes[i];
>> + icc_node_add(node, provider);
>> +
>> + dev_dbg(&pdev->dev, "registered node %s\n", node->name);
>> +
>> + /* populate links */
>> + for (j = 0; j < qnodes[i]->num_links; j++)
>> + if (qnodes[i]->links[j])
>> + icc_link_create(node, qnodes[i]->links[j]);
>> + }
>> +
>> + platform_set_drvdata(pdev, provider);
>> +
>> + return ret;
>> +err:
>> + list_for_each_entry(node, &provider->nodes, node_list) {
>> + icc_node_del(node);
>> + icc_node_destroy(node->id);
>> + }
>> + icc_provider_del(provider);
>> +
>> + return ret;
>> +}
>> +
>> +static int qnoc_remove(struct platform_device *pdev)
>> +{
>> + struct icc_provider *provider = platform_get_drvdata(pdev);
>> + struct icc_node *n;
>> +
>> + list_for_each_entry(n, &provider->nodes, node_list) {
>> + icc_node_del(n);
>> + icc_node_destroy(n->id);
>> + }
>
> clk_disable_unprepare(qp->bus_a_clk);
> clk_disable_unprepare(qp->bus_clk);
Will fix!
Thanks,
Georgi