[PATCH v4 29/35] mtd: rawnand: docg4: convert driver to nand_scan()

From: Miquel Raynal
Date: Fri Jul 20 2018 - 11:17:15 EST


Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
drivers/mtd/nand/raw/docg4.c | 55 ++++++++++++++++++++++++++------------------
1 file changed, 32 insertions(+), 23 deletions(-)

diff --git a/drivers/mtd/nand/raw/docg4.c b/drivers/mtd/nand/raw/docg4.c
index 4dccdfba6140..fec4353ff4ef 100644
--- a/drivers/mtd/nand/raw/docg4.c
+++ b/drivers/mtd/nand/raw/docg4.c
@@ -1227,10 +1227,9 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
* required within a nand driver because they are performed by the nand
* infrastructure code as part of nand_scan(). In this case they need
* to be initialized here because we skip call to nand_scan_ident() (the
- * first half of nand_scan()). The call to nand_scan_ident() is skipped
- * because for this device the chip id is not read in the manner of a
- * standard nand device. Unfortunately, nand_scan_ident() does other
- * things as well, such as call nand_set_defaults().
+ * first half of nand_scan()). The call to nand_scan_ident() could be
+ * skipped because for this device the chip id is not read in the manner
+ * of a standard nand device.
*/

struct nand_chip *nand = mtd_to_nand(mtd);
@@ -1315,6 +1314,27 @@ static int __init read_id_reg(struct mtd_info *mtd)

static char const *part_probes[] = { "cmdlinepart", "saftlpart", NULL };

+static int docg4_attach_chip(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct docg4_priv *doc = (struct docg4_priv *)(chip + 1);
+
+ init_mtd_structs(mtd);
+
+ /* Initialize kernel BCH algorithm */
+ doc->bch = init_bch(DOCG4_M, DOCG4_T, DOCG4_PRIMITIVE_POLY);
+ if (!doc->bch)
+ return -EINVAL;
+
+ reset(mtd);
+
+ return read_id_reg(mtd);
+}
+
+static const struct nand_controller_ops docg4_controller_ops = {
+ .attach_chip = docg4_attach_chip,
+};
+
static int __init probe_docg4(struct platform_device *pdev)
{
struct mtd_info *mtd;
@@ -1350,26 +1370,16 @@ static int __init probe_docg4(struct platform_device *pdev)
mtd->dev.parent = &pdev->dev;
doc->virtadr = virtadr;
doc->dev = dev;
-
- init_mtd_structs(mtd);
-
- /* initialize kernel bch algorithm */
- doc->bch = init_bch(DOCG4_M, DOCG4_T, DOCG4_PRIMITIVE_POLY);
- if (doc->bch == NULL) {
- retval = -EINVAL;
- goto free_nand;
- }
-
platform_set_drvdata(pdev, doc);

- reset(mtd);
- retval = read_id_reg(mtd);
- if (retval == -ENODEV) {
- dev_warn(dev, "No diskonchip G4 device found.\n");
- goto free_bch;
- }
-
- retval = nand_scan_tail(mtd);
+ /*
+ * Asking for 0 chips is useless here but it warns the user that the use
+ * of the nand_scan() function is a bit abused here because the
+ * initialization is actually a bit specific and re-handled again in the
+ * ->attach_chip() hook. It will probably leak some memory though.
+ */
+ nand->dummy_controller.ops = &docg4_controller_ops;
+ retval = nand_scan(mtd, 0);
if (retval)
goto free_bch;

@@ -1389,7 +1399,6 @@ static int __init probe_docg4(struct platform_device *pdev)
nand_cleanup(nand);
free_bch:
free_bch(doc->bch);
-free_nand:
kfree(nand);
unmap:
iounmap(virtadr);
--
2.14.1