[PATCH v4 20/35] mtd: rawnand: sh_flctl: convert driver to nand_scan()

From: Miquel Raynal
Date: Fri Jul 20 2018 - 11:17:26 EST


Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
drivers/mtd/nand/raw/sh_flctl.c | 19 ++++++++-----------
1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
index d37d1d3ccbf9..663c75005ac9 100644
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ b/drivers/mtd/nand/raw/sh_flctl.c
@@ -1002,10 +1002,10 @@ static void flctl_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
flctl->index += len;
}

-static int flctl_chip_init_tail(struct mtd_info *mtd)
+static int flctl_chip_attach_chip(struct nand_chip *chip)
{
+ struct mtd_info *mtd = nand_to_mtd(chip);
struct sh_flctl *flctl = mtd_to_flctl(mtd);
- struct nand_chip *chip = &flctl->chip;

if (chip->options & NAND_BUSWIDTH_16) {
/*
@@ -1073,6 +1073,10 @@ static int flctl_chip_init_tail(struct mtd_info *mtd)
return 0;
}

+static const struct nand_controller_ops flctl_nand_controller_ops = {
+ .attach_chip = flctl_chip_attach_chip,
+};
+
static irqreturn_t flctl_handle_flste(int irq, void *dev_id)
{
struct sh_flctl *flctl = dev_id;
@@ -1200,15 +1204,8 @@ static int flctl_probe(struct platform_device *pdev)

flctl_setup_dma(flctl);

- ret = nand_scan_ident(flctl_mtd, 1, NULL);
- if (ret)
- goto err_chip;
-
- ret = flctl_chip_init_tail(flctl_mtd);
- if (ret)
- goto err_chip;
-
- ret = nand_scan_tail(flctl_mtd);
+ nand->dummy_controller.ops = &flctl_nand_controller_ops;
+ ret = nand_scan(flctl_mtd, 1);
if (ret)
goto err_chip;

--
2.14.1