Re: [PATCH V5 3/3] PCI: Mask and unmask hotplug interrupts during reset

[Sinan Kaya]

On 7/20/2018 7:58 PM, Sinan Kaya wrote:
> We need to figure out how to gracefully return inside hotplug driver
> if link down happened and there is an error pending.

How about adding the following into the hotplug ISR?

1. check if firmware first is disabled
2. check if there is a fatal error pending in the device_status register
of the PCI Express capability on the root port.
3. bail out from hotplug routine if this is the case.
4. otherwise, existing behavior.