Re: [PATCH v4 09/35] mtd: rawnand: hisi504: convert driver to nand_scan()

[Boris Brezillon]

On Fri, 20 Jul 2018 17:15:01 +0200
Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote:

> Two helpers have been added to the core to make ECC-related
> configuration between the detection phase and the final NAND scan. Use
> these hooks and convert the driver to just use nand_scan() instead of
> both nand_scan_ident() and nand_scan_tail().
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>

Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>

> ---
>  drivers/mtd/nand/raw/hisi504_nand.c | 78 +++++++++++++++++++++----------------
>  1 file changed, 44 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/hisi504_nand.c b/drivers/mtd/nand/raw/hisi504_nand.c
> index a1e009c8e556..950dc7789296 100644
> --- a/drivers/mtd/nand/raw/hisi504_nand.c
> +++ b/drivers/mtd/nand/raw/hisi504_nand.c
> @@ -709,9 +709,50 @@ static int hisi_nfc_ecc_probe(struct hinfc_host *host)
>  	return 0;
>  }
>  
> +static int hisi_nfc_attach_chip(struct nand_chip *chip)
> +{
> +	struct mtd_info *mtd = nand_to_mtd(chip);
> +	struct hinfc_host *host = nand_get_controller_data(chip);
> +	int flag;
> +
> +	host->buffer = dmam_alloc_coherent(host->dev,
> +					   mtd->writesize + mtd->oobsize,
> +					   &host->dma_buffer, GFP_KERNEL);
> +	if (!host->buffer)
> +		return -ENOMEM;
> +
> +	host->dma_oob = host->dma_buffer + mtd->writesize;
> +	memset(host->buffer, 0xff, mtd->writesize + mtd->oobsize);
> +
> +	flag = hinfc_read(host, HINFC504_CON);
> +	flag &= ~(HINFC504_CON_PAGESIZE_MASK << HINFC504_CON_PAGEISZE_SHIFT);
> +	switch (mtd->writesize) {
> +	case 2048:
> +		flag |= (0x001 << HINFC504_CON_PAGEISZE_SHIFT);
> +		break;
> +	/*
> +	 * TODO: add more pagesize support,
> +	 * default pagesize has been set in hisi_nfc_host_init
> +	 */
> +	default:
> +		dev_err(host->dev, "NON-2KB page size nand flash\n");
> +		return -EINVAL;

We should probably return ENOTSUPP, but that's not related to the
change you do, so let's keep that for later.

> +	}
> +	hinfc_write(host, flag, HINFC504_CON);
> +
> +	if (chip->ecc.mode == NAND_ECC_HW)
> +		hisi_nfc_ecc_probe(host);
> +
> +	return 0;
> +}
> +
> +static const struct nand_controller_ops hisi_nfc_controller_ops = {
> +	.attach_chip = hisi_nfc_attach_chip,
> +};
> +
>  static int hisi_nfc_probe(struct platform_device *pdev)
>  {
> -	int ret = 0, irq, flag, max_chips = HINFC504_MAX_CHIP;
> +	int ret = 0, irq, max_chips = HINFC504_MAX_CHIP;
>  	struct device *dev = &pdev->dev;
>  	struct hinfc_host *host;
>  	struct nand_chip  *chip;
> @@ -769,42 +810,11 @@ static int hisi_nfc_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> -	ret = nand_scan_ident(mtd, max_chips, NULL);
> +	chip->dummy_controller.ops = &hisi_nfc_controller_ops;
> +	ret = nand_scan(mtd, max_chips);
>  	if (ret)
>  		return ret;
>  
> -	host->buffer = dmam_alloc_coherent(dev, mtd->writesize + mtd->oobsize,
> -		&host->dma_buffer, GFP_KERNEL);
> -	if (!host->buffer)
> -		return -ENOMEM;
> -
> -	host->dma_oob = host->dma_buffer + mtd->writesize;
> -	memset(host->buffer, 0xff, mtd->writesize + mtd->oobsize);
> -
> -	flag = hinfc_read(host, HINFC504_CON);
> -	flag &= ~(HINFC504_CON_PAGESIZE_MASK << HINFC504_CON_PAGEISZE_SHIFT);
> -	switch (mtd->writesize) {
> -	case 2048:
> -		flag |= (0x001 << HINFC504_CON_PAGEISZE_SHIFT); break;
> -	/*
> -	 * TODO: add more pagesize support,
> -	 * default pagesize has been set in hisi_nfc_host_init
> -	 */
> -	default:
> -		dev_err(dev, "NON-2KB page size nand flash\n");
> -		return -EINVAL;
> -	}
> -	hinfc_write(host, flag, HINFC504_CON);
> -
> -	if (chip->ecc.mode == NAND_ECC_HW)
> -		hisi_nfc_ecc_probe(host);
> -
> -	ret = nand_scan_tail(mtd);
> -	if (ret) {
> -		dev_err(dev, "nand_scan_tail failed: %d\n", ret);
> -		return ret;
> -	}
> -
>  	ret = mtd_device_register(mtd, NULL, 0);
>  	if (ret) {
>  		dev_err(dev, "Err MTD partition=%d\n", ret);