Re: [PATCH v4 18/35] mtd: rawnand: s3c2410: convert driver to nand_scan()

[Boris Brezillon]

On Fri, 20 Jul 2018 17:15:10 +0200
Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote:

> Two helpers have been added to the core to make ECC-related
> configuration between the detection phase and the final NAND scan. Use
> these hooks and convert the driver to just use nand_scan() instead of
> both nand_scan_ident() and nand_scan_tail().
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>

Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>

> ---
>  drivers/mtd/nand/raw/s3c2410.c | 30 +++++++++++++-----------------
>  1 file changed, 13 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/s3c2410.c b/drivers/mtd/nand/raw/s3c2410.c
> index e8bf64832213..c21e8892394a 100644
> --- a/drivers/mtd/nand/raw/s3c2410.c
> +++ b/drivers/mtd/nand/raw/s3c2410.c
> @@ -915,20 +915,19 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
>  }
>  
>  /**
> - * s3c2410_nand_update_chip - post probe update
> - * @info: The controller instance.
> - * @nmtd: The driver version of the MTD instance.
> + * s3c2410_nand_attach_chip - Init the ECC engine after NAND scan
> + * @chip: The NAND chip
>   *
> - * This routine is called after the chip probe has successfully completed
> - * and the relevant per-chip information updated. This call ensure that
> + * This hook is called by the core after the identification of the NAND chip,
> + * once the relevant per-chip information is up to date.. This call ensure that
>   * we update the internal state accordingly.
>   *
>   * The internal state is currently limited to the ECC state information.
>  */
> -static int s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
> -				    struct s3c2410_nand_mtd *nmtd)
> +static int s3c2410_nand_attach_chip(struct nand_chip *chip)
>  {
> -	struct nand_chip *chip = &nmtd->chip;
> +	struct mtd_info *mtd = nand_to_mtd(chip);
> +	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
>  
>  	switch (chip->ecc.mode) {
>  
> @@ -998,6 +997,10 @@ static int s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
>  	return 0;
>  }
>  
> +static const struct nand_controller_ops s3c24xx_nand_controller_ops = {
> +	.attach_chip = s3c2410_nand_attach_chip,
> +};
> +
>  static const struct of_device_id s3c24xx_nand_dt_ids[] = {
>  	{
>  		.compatible = "samsung,s3c2410-nand",
> @@ -1095,6 +1098,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
>  	platform_set_drvdata(pdev, info);
>  
>  	nand_controller_init(&info->controller);
> +	info->controller.ops = &s3c24xx_nand_controller_ops;
>  
>  	/* get the clock source and enable it */
>  
> @@ -1166,15 +1170,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
>  		mtd->dev.parent = &pdev->dev;
>  		s3c2410_nand_init_chip(info, nmtd, sets);
>  
> -		err = nand_scan_ident(mtd, (sets) ? sets->nr_chips : 1, NULL);
> -		if (err)
> -			goto exit_error;
> -
> -		err = s3c2410_nand_update_chip(info, nmtd);
> -		if (err < 0)
> -			goto exit_error;
> -
> -		err = nand_scan_tail(mtd);
> +		err = nand_scan(mtd, sets ? sets->nr_chips : 1);
>  		if (err)
>  			goto exit_error;
>