Re: [PATCH v8 0/7] thermal: tsens: Refactoring for TSENSv2 IP

[Amit Kucheria]

Andy, Eduardo: Please consider this a gentle ping to understand how
this will get merged.

Andy, I guess you'll take the DT patches 2,4 and 7 and the rest will
go through Eduardo's thermal tree?

Regards,
Amit

On Wed, Jul 18, 2018 at 12:13 PM, Amit Kucheria
<amit.kucheria@xxxxxxxxxx> wrote:
> Here is a repost of the series. There have been no code changes since v6,
> just improving comments, patch descriptions, documentation. The series does
> the following:
> - Some code moves to allow code sharing between different SoCs with v2 of
>   the TSENS IP,
> - a generic qcom,tsens-v2 property as a fallback compatible for all v2.x.y
>   platforms,
> - new platform support (sdm845)
> - a cleanup patch and
> - a DT change to have a common way to deal with the SROT and TM registers
>   despite slightly different features across the IP family and different
>   register offsets.
>
> Changes since v7:
> - Fix couple of typos in spelling
> - Add review tags
> - Move the DT documentation patch before the code changes
>
> Changes since v6:
> - Fix comments and patch descriptions as per Doug's review
> - Rename tsens to thermal-sensor in DT
> - Add various review tags
>
> Changes since v5:
> - Actually fix unit addressses for the two tsens blocks as per Stephen's
>   comment.
>
> Changes since v4:
> - Revert back to a single fallback bindind qcom,tsens-v2 as per Rob's
>   suggestion.
> - Rework how old (unsplit SROT and TM address space) DTs are handled by
>   needing a 0x1000 offset but still sharing common code in tsens-v2.c
> - Remove the patch to added TRDY checks while we investigate Matthias'
>   reports
> - Fix unit addressses for the two tsens blocks as per Stephen's comment.
>
> Changes since v3:
> - Introduce qcom,tsens-v2.4.0 property and make qcom,tsens-v2 a
>   fallback, compatible property.
> - Rename ops_v2 to ops_generic_v2
>
> Changes since v2:
>
> - Based on review, moved tsens-8996.c to tsens-v2.c and changed
>   corresponding function names, struct names to allow for generic tsensv2
>   platforms
> - All v2 platforms will now only need to use the qcom,tsen-v2
>   property
> - Added a DT patch to initialize tsens driver on sdm845, now that
>   4.18-rc1 will contain an sdm845.dtsi
>
> Changes since v1:
> - Move get_temp() from tsens-8996 to tsens-common and rename
> - Change 8996 DT entry to allow init_common() to work across
>   sdm845 and 8996 due to different offsets
>
> Amit Kucheria (7):
>   thermal: tsens: Get rid of unused fields in structure
>   dt: thermal: tsens: Document the fallback DT property for v2 of TSENS
>     IP
>   thermal: tsens: Add support to split up register address space into
>     two
>   arm64: dts: msm8996: thermal: Initialise via DT and add second
>     controller
>   thermal: tsens: Rename tsens-8996 to tsens-v2 for reuse
>   thermal: tsens: Add generic support for TSENS v2 IP
>   arm64: dts: sdm845: Add tsens nodes
>
>  .../devicetree/bindings/thermal/qcom-tsens.txt     | 31 +++++++++++++++++----
>  arch/arm64/boot/dts/qcom/msm8996.dtsi              | 14 ++++++++--
>  arch/arm64/boot/dts/qcom/sdm845.dtsi               | 16 +++++++++++
>  drivers/thermal/qcom/Makefile                      |  2 +-
>  drivers/thermal/qcom/tsens-common.c                | 12 ++++++++
>  drivers/thermal/qcom/{tsens-8996.c => tsens-v2.c}  | 32 ++++++++++------------
>  drivers/thermal/qcom/tsens.c                       |  3 ++
>  drivers/thermal/qcom/tsens.h                       |  8 ++++--
>  8 files changed, 88 insertions(+), 30 deletions(-)
>  rename drivers/thermal/qcom/{tsens-8996.c => tsens-v2.c} (64%)
>
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html